The appearance on the refrigerator control panel Indesit of a burning or flashing indicator with the inscription "Push Go" often takes the owner by surprise. Many users mistakenly perceive this message as a signal of a serious breakdown or system failure, but in most cases this is a standard temperature control function.
This inscription indicates the activation of the mode intensive freezing, which is designed to quickly cool a large volume of newly loaded products. Understanding the logic of the operation of this indicator will allow you to effectively manage the operation of the unit and avoid unnecessary stress when you see a burning light.
In this article we will analyze in detail why this indicator lights up, how to correctly turn the function on and off, and also consider situations where blinking may indicate real problems with thermoregulation inside the chambers.
The main purpose of the Push Go mode
The function Push Go (or simply "Go") in refrigerators Indesit is an analogue of the "Super Freeze" mode, characteristic of many other brands. The main purpose of activating this mode is to force the compressor to operate continuously to reduce the temperature in the freezer as quickly as possible.
This is especially true in situations where you have loaded a large amount of fresh, not yet frozen foods into the freezer, such as meat, fish or berries. Without enabling the accelerated mode, warm cargo can increase the overall temperature in the chamber, which will lead to partial defrosting of the supplies already lying there and loss of their quality.
By activating this function, you instruct the electronic module to ignore standard compressor shutdown cycles. The system operates at the limit of its capabilitiesin order to freeze the new volume as quickly as possible, after which (in automatic mode) it should return to normal operating algorithm.
How to activate and deactivate the function
Control of the fast freezing mode on the panels Indesit is usually carried out using the same button, which is marked “Push Go” or the corresponding symbol is displayed. The logic of operation may differ slightly depending on the specific series of the refrigerator, but the general principle remains the same.
To turn on the mode, you must briefly press the control button. At this moment, LED indicatorlights up, indicating that the function is active. The compressor goes into continuous operation mode and the temperature in the freezer begins to drop rapidly.
To turn off the mode, you usually need to press the same button again. However, you should be careful: in some models, when turned on manually, the function does not turn off automatically and requires your intervention. If the indicator is constantly on, it means that the mode is working right now.
Automatic shutdown and operation timer
Modern models of refrigerators Indesit equipped with an intelligent control system, which provides for automatic completion of the intensive freezing cycle. This is done so that the user does not forget to turn off the mode and does not overload the compressor beyond necessity.
The standard operating cycle of the function Push Go is approximately 18 hours. After this time, the electronics independently open the intensive cooling circuit, and the refrigerator returns to maintaining the temperature set by the user. The indicator on the panel goes out.
If you turned on the mode to freeze a small amount of food, 18 hours may be excessive. In such cases, it is recommended manually disable the function immediately after the products have frozen in order to reduce the load on equipment and save energy.
☑️ Checking the operation of the freezing mode
Fault diagnosis: if the indicator is blinking
The situation when the indicator Push Go not just lights up, but starts flashing, often indicates that the refrigerator cannot reach the set temperature parameters. This can be caused by both external factors and technical malfunctions.
One of the common causes of blinking is loading a large volume of room temperature products into the chamber at the same time as turning on the mode. The cooling system simply cannot cope with thermal shock, and the sensors record deviations from the norm for a long time.
Also, flashing may indicate problems with the seal of the chamber. If the door is not closed properly or the rubber seal is damaged, warm air constantly enters inside and the refrigerator idles, unable to lower the temperature to the required level.
⚠️ Attention: If the indicator blinks for more than 24 hours in a row, despite the fact that the door is closed tightly and the food has cooled, this may indicate a freon leak or a malfunction of the temperature sensor. Diagnostics by a technician is required.
The influence of external factors on the operation of the system
The efficiency of the mode Push Go directly depends on the operating conditions of the refrigerator. There are external factors that can interfere with the normal operation of the intensive freezing system and cause errors in the indication.
First of all, you should pay attention to the temperature in the room. If the refrigerator Indesit is installed in an unheated room or near heat sources (radiators, stove), the system may not have time to remove heat from the chambers even at maximum compressor power.
An important aspect is also the correct placement of products inside the chambers. If you've completely filled your freezer to the point of blocking the vents, cold air won't be able to circulate. The sensors will show high temperatures in some zones, while in others there will already be freezing.
| Symptom on the panel | Probable cause | User actions |
|---|---|---|
| The indicator is constantly on | The mode is turned on manually | Press the Push Go button to turn it off |
| Indicator flashes | Temperature is above normal | Check the tightness of the door closure and loading |
| The indicator does not light up | Faulty button or board | Check the power supply and call a technician |
| All indicators are on | System electronics failure | Perform complete defrosting (24 hours) |
Rules for loading products for effective freezing
In order for the mode Push Go to work as efficiently as possible and not lead to emergency situations, it is important to follow the rules for loading products. Incorrect placement of cargo is one of the common reasons why users complain about the “improper” operation of the refrigerator.
It is not recommended to load more than 2-3 kilograms of warm food into the freezer at the same time, even when the accelerated freezing function is turned on. It is better to load in portions, giving the system time to stabilize the temperature.
Products must be packaged hermetically. Moisture or food particles getting into the temperature sensors or ventilation ducts can lead to incorrect readings and electronic malfunctions Indesit.
Can food be stored in Push Go mode permanently?
No, constant use of the intensive freezing mode is not recommended. This leads to accelerated wear of the compressor, excessive energy consumption and can cause freezing of products that lose their taste and structure.
Resetting errors and rebooting the system
In some cases, the electronics of the refrigerator may freeze, and the indicator Push Go will light up or blink even after the cause has been eliminated. In such a situation, a soft reset or a complete reboot of the device may be required.
The easiest and safest way to reboot the controller is to disconnect the refrigerator from the power supply. To do this, remove the plug from the socket and wait at least 10-15 minutes. This time is necessary for the capacitors on the control board to discharge and temporary errors to be reset.
After turning on the power, the system will perform a self-diagnosis. If there are no critical faults (such as sensor breakage or freon leakage), the indicator should go out and the refrigerator will return to normal operation. If the problem persists, a more in-depth diagnosis is required.
⚠️ Attention: Do not turn off and on the refrigerator (in less than 5-10 minutes). This can damage the compressor as the coolant must have time to be redistributed throughout the system and the oil to return to the engine crankcase.
Frequently asked questions (FAQ)
What should I do if the Push Go button does not respond to pressing?
If the button does not respond, the panel may be locked controls (Child Lock function). Try holding down the combination of buttons indicated in the instructions (often these are two buttons at the same time), or hold down the Push Go button for 3-5 seconds. If this does not help, check if the button is physically stuck.
Is frequent use of the fast freezing mode harmful for the compressor?
Frequent use of the mode Push Go (every day or every other day) really increases the load on the compressor, forcing it to work without planned breaks. This may shorten the life of the unit. Use this mode only when necessary: when loading a large volume of fresh products.
Why does the temperature in the chamber take a long time to recover after turning off Push Go?
After intensive work, the temperature of the evaporator walls and products can be extremely low. The thermostat takes time to warm up and command the compressor to start again to maintain the temperature rather than lower it further. This is a normal stabilization process.
Can the blinking of the indicator be associated with a fan failure?
Yes, in refrigerators with the No Frost system, the blinking of the frost indicator often indicates that cold air is not circulating through the chambers. This may be caused by a malfunction of the fan, freezing of the air supply duct, or a broken damper.