How many kilowatts per day does a two-chamber Atlant refrigerator spend: complete analysis + tables by model

When choosing a refrigerator Atlant or trying to optimize energy costs, many are faced with the question: how much does a two-chamber model actually “eat” per day? The manufacturer indicates annual consumption in kilowatt-hours, but how do you translate this into daily numbers? And why can real indicators differ from the passport ones by 1.5–2 times?

In this article we will analyze accurate data on popular Atlant models (from MHM-1705 to MXM-2835-080), explain how the energy efficiency class affects consumption, and show how Measure the consumption of your refrigerator yourself. And we will also give 7 proven ways to reduce energy consumption without damage to food storage.

Passport data: how many kW per day does the manufacturer declare

In the technical characteristics of refrigerators Atlant energy consumption is indicated in kilowatt-hours per year (kWh/year). To get the daily consumption, this figure is divided by 365 days. For example:

  • 📄 Atlant MHM-1705-030 (class A+): 220 kWh/year → ~0.60 kW/day
  • 📄 Atlant MHM-2835-080 (class A++): 260 kWh/year → ~0.71 kW/day
  • 📄 Atlant MHM-2844-90 (class A+++): 190 kWh/year → ~0.52 kW/day

But these figures - laboratory indicators under ideal conditions: room temperature +25°C, the door does not open, the refrigerator is full 50%. In reality, consumption could increase by 30–100%. For example, if the kitchen is +30°C, and you often open the door, the same MHM-1705 will spend not 0.6, but 0.9–1.1 kW per day.

📊 What energy efficiency class does your refrigerator have?
A+++
A++
A+
A or lower
I don’t know

Table: daily consumption by Atlant models

We collected data on popular two-chamber models Atlant (volume 200–350 l) taking into account the energy efficiency class. The figures are given for standard operating conditions (room temperature +22...+26°C).

Model Energy efficiency class Annual consumption (kWh) Daily consumption (kW) Approximate cost per month* (₽)
Atlant MXM-1705-030 A+ 220 0.60 ~55
Atlant MXM-1842-030 A++ 200 0.55 ~50
Atlant MXM-2835-080 A++ 260 0.71 ~65
Atlant MXM-2844-90 A+++ 190 0.52 ~48
Atlant MXM-3134-90 A++ 280 0.77 ~70

*Calculation is based on the average tariff for Russia in 2026 - 5.5 ₽/kWh. Attention: tariffs vary by region (from 3.5 to 8 ₽/kWh).

⚠️ Attention: If your model is not listed in the table, divide the annual consumption from the instructions by 365. For example, for Atlant MHM-2831-090 (300 kWh/year) daily consumption will be ~0.82 kW.

5 factors that increase real consumption

Even the most economical refrigerator Atlant Class A+++ can turn into an “energy poison” if operating conditions are violated. Here are the key factors influencing consumption:

  • 🌡️ Room temperature. At +30°C, the compressor operates 30–40% longer than at +20°C. Each degree above +25°C adds ~5% to consumption.
  • 🚪 Frequency of door openings. Each opening increases the load on the compressor by 10–15 seconds. In a family of 4 people, the door opens ~50 times a day, which adds up to 0.1–0.15 kW to the daily consumption.
  • ❄️ The thickness of the ice in the freezer. An ice “coat” 5 mm thick impairs heat transfer by 20–30%. If you do not defrost the refrigerator for years, consumption will increase by 0.2–0.3 kW/day.
  • 📦 Degree of filling. An empty refrigerator wastes energy on cooling the air, and an overloaded one impedes circulation. It is optimal to fill by 60–70%.
  • ☀️ Direct sunlight or close proximity to the stove. Heating the housing 5–10°C above room temperature increases consumption by 10–15%.
How to check if your refrigerator is overheating?

Put the thermometer on the top shelf (not against the wall) for 12 hours. If the temperature is higher than +5°C in the refrigerator compartment or -18°C in the freezer, the compressor is working in enhanced mode and consumption is overestimated.

How to measure actual consumption yourself

To find out exactly how many kilowatts yours spends Atlant, use one of methods:

  1. Using a household wattmeter. Connect the refrigerator through the device (costs from 500 ₽) and leave for 24 hours. The device will show the exact consumption in kWh.
  2. Electricity meter. Disconnect all appliances in the apartment, except the refrigerator, and note the meter readings for the day. The difference is consumption Atlanta.
  3. Smart socket. Sockets with energy metering function (for example, Xiaomi Mi Smart Plug) record consumption in real time.

When measuring, consider:

  • 📅 Carry out the test in normal use mode (do not turn off the refrigerator during the measurement).
  • 🌡️ Record the temperature in the room - it should be stable.
  • ⏱️ The minimum measurement period is 24 hours (preferably 3-5 days for averaging).

7 ways to reduce the energy consumption of an Atlant refrigerator

Even without purchasing a new model, you can reduce energy consumption by 15-30%. Here are the working methods:

  1. Set the optimal temperature. In the refrigerator compartment +4...+5°C is enough (not +2°C, as is often put “just in case”), in the freezer - -18°C (and not -24°C). Each extra degree of cold adds 5–10% to consumption.
  2. Defrost regularly. An ice crust 5 mm thick increases consumption by 20–30%. Defrost Atlant every 3-6 months (depending on the model).
  3. Check the seal. A worn rubber band allows warm air to pass through, causing the compressor to work longer. Carry out a test: close the door with a piece of paper - if it falls out, the seal needs to be replaced.
  4. Do not place hot foods. Cool the pans to room temperature before putting them in the refrigerator. Hot soup in a 3-liter saucepan can add 0.05–0.1 kW to daily consumption.
  5. Organize air circulation. Do not place the refrigerator close to the wall (minimum clearance - 5 cm), do not block the ventilation grilles.
  6. Control the filling. An empty refrigerator spends energy cooling the air, while an overloaded one spends energy fighting heat from food. It is optimal to fill 60–70%.
  7. Use eco modes. In some models Atlant (for example, MXM-2844-90) there is a “Vacation” mode that maintains +15°C during a long absence.

☑️ Check before reducing consumption

Done: 0 / 5
⚠️ Attention: If after all measures the consumption remains high (for example, >1.2 kW/day for a class A++ model), this may indicate compressor malfunction, freon leak or thermostat failure. In this case, a specialist diagnosis is required.

Comparison with other brands: who is more economical?

Double-chamber refrigerators Atlant belong to the middle segment in terms of energy consumption. For comparison, we provide data on similar models of other brands (volume 250–300 l, class A++):

Brand and model Annual consumption (kWh) Daily consumption (kW) Deviation from Atlant MHM-2835-080
Samsung RB-29 FERNCSA 240 0.66 -7%
LG GA-B409 SQZL 220 0.60 -15%
Indesit DF 4200 W 280 0.77 +9%
Bosch KGN39VL35R 200 0.55 -23%

As you can see, Atlant loses to premium brands (Bosch, LG) by 10–25%, but outperforms budget models (Indesit, Beko). At the same time, the cost Atlanta is 1.5–2 times lower, which makes it one of the best options in terms of price/efficiency ratio.

When is high consumption the norm?

High electricity consumption does not always indicate a malfunction. There are situations when increased consumption is justified:

  • 🔥 It's hot outside. At temperatures above +30°C, the compressor works almost non-stop. On such days, consumption can increase by 50–70%.
  • ❄️ First switching on or defrosting. After defrosting, the refrigerator works for 6-12 hours in enhanced mode to reach the desired temperature.
  • 🍗 Loading a large volume of warm products. For example, after shopping in a hypermarket or preparing supplies for the winter.
  • 🔧 Activation of the mode “Super freezing.” In some models Atlant this mode turns on automatically when you open the freezer and works for 2-4 hours.

If increased consumption is observed for longer than 2-3 days without obvious reasons, it is worth checking:

  • The temperature in the chambers (perhaps the thermostat has gone wrong).
  • The condition of the condenser (dust on the grill at the rear increases consumption by 10–15%).
  • The presence of ice in the freezer (even a thin layer impairs heat transfer).

FAQ: answers to frequently asked questions

My Atlant MXM-2835 consumes 1.5 kW per day - is this the norm?

No, this is 2 times higher than the passport values. The reasons may be:

  • Malfunction of the thermostat (the compressor does not turn off).
  • Leakage of freon (the refrigerator does not freeze well, but works without stopping).
  • Wear of the seal or constant flow of warm air.

First check the temperature in the chambers. If it is higher than normal, call a specialist.

How much will it cost to operate an Atlant refrigerator per month at a tariff of 6 ₽/kWh?

To calculate, use the formula:

(Daily consumption × 30 days × tariff) = cost in month

Example for Atlant MHM-1842-030 (0.55 kW/day):

0.55 × 30 × 6 = ~99 ₽/month

How does the energy efficiency class affect consumption?

The difference between classes can reach 50%:

  • A+++: the lowest consumption (30–50% more economical than A).
  • A++: 20–30% more economical A.
  • A+: 10–20% more economical A.
  • A: basic level (outdated standard).

When replacing a class A refrigerator with an A+++ one, the savings will be ~300 kWh per year (~1650 ₽).

Is it possible to turn off the refrigerator at night to save money?

No, this will lead to:

  • Deterioration of food (especially in the freezer).
  • Increased load on the compressor when turned on again.
  • Reduced service life of equipment.

Savings will be ~0.3–0.5 kW (1.5–3 ₽), and the risks are disproportionately higher.

Which Atlant model is the most economical?

Among two-chamber models, the minimum consumption is:

  • Atlant MKhM-2844-90 (A+++, 190 kWh/year).
  • Atlant MKhM-1842-030 (A++, 200 kWh/year).

Both models are equipped with inverter compressors that automatically regulate power.