How many watts does an LG refrigerator consume: calculation of power by model and class

When choosing a refrigerator LG many are faced with the question: "And how much will it “eat”?” electricity?" After all, not only the electricity bill depends on the power, but also the load on the home network, especially if the equipment works around the clock. In this article we will look at real energy consumption refrigerators LG —from compact single-chamber to spacious ones Side-by-Side—and also learn how to calculate consumption in watts per hour, day and month.

It’s worth clarifying right away: refrigerator power and it energy consumption are different things. The first is measured in watts (W) and shows the maximum load when the compressor is operating, and the second - how many kilowatt-hours (kWh) the equipment “eats” over a period of time. For example, a refrigerator with power 150 W can consume only 1 kWh per day thanks to effective thermal insulation and an inverter compressor.

In order not to get confused in the numbers, we collected data on popular models LG (2018–2026), added comparison tables and formulas for independent calculations. And at the end - answers to frequently asked questions, for example, why a new refrigerator “eats” more than an old one or how to save on electricity without damaging food.

🔍 Hint: If you need to quickly find data on your model, use the page search (Ctrl+F) and enter the name of the series (for example, GA-B489 or GR-N309).

1. Power of LG refrigerators: what do the numbers on the sticker mean?

On the energy sticker (usually on the back wall or inside the chamber) two key parameters are indicated: class energy efficiency (from A+++ to D) and annual consumption kWh. But what's there do not write is peak compressor power in watts, which can be 3-5 times higher than average consumption.

For example, a model LG GA-B489YVQZ with class A+++ and annual norm 200 kWh actually has a compressor power 120–150 W. Why is the difference so big? Because:

• 🔄 The compressor does not work constantly, but in cycles 10–20 minutes, then “rests”)
• ❄️ Energy is spent not only on cooling, but also on lighting, fans (in models with No Frost), electronic panels.
• 🌡️ In hot climates or with frequent door openings, consumption increases by 20–30%.

📌 Important: Manufacturers indicate laboratory data at room temperature +25°C In real conditions (for example, if the refrigerator is located next to the stove), consumption may increase by 15–25%.

2. Power table of LG refrigerators by model (2018–2026)

Below is a comparative overview of popular ones series LG indicating peak compressor power, average consumption per day and annual norm. Data are based on technical data sheets and tests of independent laboratories (for example, Roskachestvo).

⚠️ Attention: For models with the function Smart Diagnosis (for example, LG GC-B247) in the first day after connection, consumption may be higher by 10–15% due to sensor calibration.

💡

3. How to calculate the consumption of an LG refrigerator in watts?

To independently calculate how many watts your refrigerator draws, use the formula:

Compressor power (W) × Operating coefficient (0.3–0.6) = Average consumption per hour (Wh)

Where operation coefficient depends on:

• 🏠 Temperatures in indoors: 0.3 (cool, +18°C), 0.5 (normal, +25°C), 0.6 (hot, +30°C).
• 🔄 Door opening frequencies: +0.1 to the coefficient for every 10 openings per day.
• ❄️ Mode work: +0.2 for Super Freeze or Vacation Mode.

Example: Refrigerator LG GA-B489 with a compressor 150 W is in the kitchen at +28°C, the door is opened 15 times a day. data-i="144">Example:

1. Base coefficient at +25°C = 0.5.
2. Heat correction (+3°C) = +0.05 → 0.55.
3. Adjustment for openings (15 times) = +0.1 → 0.65.
4. Average consumption per hour: 150 W × 0.65 = 97.5 Wh.
5. V day: 97.5 × 24 = 2,340 Wh (2.34 kWh).

📊

4. consumes more than indicated in the passport?

If your refrigerator “winds” kilowatts above the norm, the reasons can be both technical and operational. Let's consider the most common:

🔧 Technical problems:

• 🛠️ Compressor wear: Over time, its efficiency drops, and it works longer to maintain the temperature. A characteristic sign is a refrigerator hums almost constantly.
• 🧊 Tightness failure: A damaged door seal or a crack in the body leads to cold leakage. It’s easy to check: place a sheet of paper between the door and the body - if it falls out, the seal is needed. replace.
• 🌬️ Clogged No Frost system: Fans and evaporator are covered with ice, and the compressor is worn out. Required defrost for 12–24. hours.

⚡ Operational errors:

• 🔥 Heat or direct sunlight: If the refrigerator is located next to the stove or window, it spends up to 40% energy fighting external heat.
• 🍲 Hot foods: Placing pots of soup or freshly cooked dishes increases the load on the 15–20%.
• 🧊 Excessive loading: Crowded shelves disrupt air circulation and the compressor runs longer.

⚠️ Attention: In models with linear inverter compressor (for example, LG GB-B589) a sharp increase in consumption may indicate a firmware failure. In this case, resetting the settings (Settings → Support → Reset) or updating the software through the application will help LG ThinQ.

How to check real consumption?

Buy a household wattmeter (costs from 500 ₽) and connect the refrigerator through it for 24 hours. The device will show the exact consumption in kWh, as well as the peak power and operating time of the compressor.

5. How much electricity does an LG refrigerator consume per month?

To convert daily consumption to monthly, use the formula:

Daily consumption (kWh) × 30 days × Tariff (₽/kWh) = Cost per month

Examples for Moscow (tariff 6.57 ₽/kWh in 2026):

💰

⚠️ Attention: In regions with differentiated tariffs (day/night), it is more profitable to connect a refrigerator through socket with a timerso that the main load falls on the night time (for example, from 23:00 to 7:00), when electricity is cheaper by 30–50%.

6. How to reduce the consumption of an LG refrigerator without damaging food?

Simple steps will help reduce energy consumption by 10–30% . Here is a checklist for refrigerator owners LG:

Set the temperature to +4°C in the refrigerator compartment and -18°C in the freezer|

Disable the mode Smart Diagnosisif not in use|

Wipe the condenser (grid on the back wall) from dust 2 times a year|

Do not place the refrigerator close to the wall (the gap is at least 5 cm)|

Use containers with water to accumulate cold when the lights are turned off-->

🔋 Additional life hacks:

• 🧲 Magnetic seals: If the door does not fit well, stick thin magnetic tape around the perimeter (sold in hardware stores).
• ☀️ Thermal screen: For models facing the sunny side, use foil insulation (for example, Penofol) on the back wall.
• 📱 Smart control: In refrigerators with Wi-Fi (series Smart ThinQ), set up notifications about prolonged opening of the door through the application.

📉

7. Frequently asked questions about the power of LG refrigerators

🔌 How many watts does an LG refrigerator consume when first turned on?

In the first 2-3 hours after connection, consumption can reach 300–500 W due to the start of the compressor and heating of the oil in the system. This is normal - then consumption stabilizes.

❄️ Why does the LG freezer “eat up” more electricity in winter?

Paradoxically, in the cold season the compressor works longer if the refrigerator is standing on unheated balcony or in a room with a temperature below +16°C. The optimal range for operation is +18…+25°C.

💡 Is it possible to connect an LG refrigerator to a solar battery?

Yes, but with reservations:

1. The power of the inverter must be at least 300 W (for peak loads).
2. Battery - from 100 Ah (for battery life 6-8 hours).
3. Use pure sine (pure sine wave) inverter - otherwise the compressor may burn out.

🔄 How often should the compressor turn on in an LG refrigerator?

B The normal work/rest cycle is 1:2 or 1:3 (for example, 15 minutes of work, 30–45 minutes of rest). If the compressor turns on more than once every 10 minutescheck:

• The temperature in the chambers (the mode may be set Super Freeze).
• Tightness doors.
• Loading products (do they block the ventilation holes).

🔧 What to do if the LG refrigerator begins to consume 2 times more?

First, rule out operational reasons (see section 4If there is a problem). remains:

1. Check temperature sensor (if there is a malfunction, the compressor runs without stopping).
2. Inspect start relay — if In the event of a breakdown, it can “stick”, causing the motor to wear out.
3. Call a technician for diagnostics leaks freon (a characteristic sign is that the refrigerator does not freeze well, but the compressor is hot).

💰 Sensor repair cost: 1 500–3 000 ₽, relay: 2 000–4 500 ₽.