When planning the purchase of new household appliances or preparing to move, one of the key parameters is the weight of the unit. The brand's two-chamber models Atlant with a height of about 180 centimeters are among the most popular on the market, but their weight can vary significantly depending on the specific series and year of manufacture. Understanding the exact weight is necessary not only to calculate the cost of cargo transportation, but also to assess the loads on the floor covering and the possibility of moving equipment independently.
The average weight of such refrigerators usually ranges from 50 to 75 kilograms, which makes them heavy enough to carry alone. It is important to consider that the weight stated in the documentation may differ from the actual weight due to changes in design or configuration. Exact data about the weight of a specific model Atlant always indicated in the technical data sheet or on the factory sticker located inside the camera.
In this article we will analyze in detail what the weight of various modifications depends on, provide comparative tables and give recommendations for safe transportation. Knowing these nuances will help you avoid damage to the housing and compressor when moving equipment.
Factors affecting the weight of the refrigerator
The weight of refrigeration equipment is not a random variable, but the result of engineering calculations and the materials used. The main factor determining the weight of a model with a height of 180 cm is volume of internal space the number of compressors. Single-compressor models, as a rule, are lighter than their two-compressor counterparts, since they have fewer metal parts and copper tubes in the refrigerant circulation system.
The material of the shelves and drawers also contributes to the total weight. Glass shelves are significantly heavier than plastic racks, and the presence of additional functions, such as the “Fresh Zone” or an ice maker, adds weight due to extra elements. In addition, the thickness of the thermal insulation layer affects the dimensions and weight of the case.
The effect of refrigerant on weight
Modern refrigerants (R600a) are lighter than old freons, but their quantity is so small that the difference in the total weight of the refrigerator is only a few grams and has no practical significance for transportation.
It is worth considering the packaging. When shipping from a store, the weight of the cardboard box, foam padding and securing straps is added to the total weight, which can increase the total weight of the shipment by another 3-5 kilograms. This is important to remember when ordering the services of loaders or a taxi.
Comparative analysis of weight by Atlant series
The brand Atlant produces many series, and even with the same height of 180 cm, their weight may vary. Classic models of the 4008 or 4010 series, which have been produced for decades, often have a more massive body compared to modern narrow or designer series.
For clarity, we present data on popular models. Please note that the table shows the net weight (of the refrigerator itself), excluding packaging.
| Refrigerator model | Height, cm | Number of compressors | Net weight, kg |
|---|---|---|---|
| Atlant 4008-022 | 185 | 1 | 62 |
| Atlant 4425-000 | 180 | 2 | 68 |
| Atlant 4502-023 | 180 | 1 | 59 |
| Atlant 6025-101 | 185 | 1 | 65 |
As can be seen from the table, two-compressor models are heavier. For example, a series 4425 weighs almost 10 kg more than a single-compressor 4502, with similar dimensions. This is due to the presence of a second motor-compressor and a double piping system.
Design features and weight of components
When considering the issue of weight, one cannot ignore the internal structure. A two-chamber refrigerator is a complex unit where each element has its own mass. The compressor is the heaviest removable component, its weight can reach 10–12 kg in older models and about 8–9 kg in modern inverter versions.
Refrigerator doors also make a significant contribution. In models with the No Frost system, doors are often heavier due to built-in fans and a more complex air duct system. In addition, metal shelves in the doors (balconettes) add weight compared to plastic counterparts.
- 🧊 Evaporator: in models with a drip system ("crying wall"), the aluminum evaporator is lighter than the No Frost duct system.
- 🔩 Fasteners: the number of metal bolts and hinges affects total weight, especially in heavy two-door models.
- ❄️ Refrigerant: Although the gas is light, the copper pipes of the circulation system add several kilograms to the weight of the entire product.
If you plan to disassemble the refrigerator for removal through a narrow opening, Remember: Removing the doors can make the task 15-20 kg easier, but requires caution.
⚠️ Attention: Before removing the doors, be sure to disconnect all electrical cables going to the control panel or lamps on the door, if they do not have quick-release connectors. In some models Atlant the wiring may be hidden in the loops.
Transportation and moving: practical tips
Moving a refrigerator weighing more than 60 kg requires compliance with certain safety rules. Even if you are in good physical shape, carrying such a load alone is dangerous for your back and the unit itself. The optimal solution is to work in pairs or use a special trolley.
When moving manually, try to keep the body vertical. You can tilt the refrigerator, but the angle should not exceed 40 degrees. This is critical to maintaining the integrity of the compressor and preventing oil from leaking into the refrigerant circuit. Atlant possible, but the angle should not exceed 40 degrees. This is critical to maintaining the integrity of the compressor and preventing oil from leaking into the refrigerant circuit.
☑️ Preparation for moving
Use belts to carry weights, they allow you to redistribute the load from your hands to your shoulders and body. If the refrigerator has a glossy surface, first wrap it with protective film or cardboard to avoid scratches on the door jambs.
The influence of weight on installation and load on the floor
When installing a heavy two-chamber refrigerator, it is important to consider the load per square centimeter of area placed on the legs of the unit. In old houses with wooden floors or on the second floors of private houses, this parameter may be important. Point loads from the legs can cause denting of soft floor coverings such as linoleum or vinyl tile.
To evenly distribute the weight, it is recommended to use footrests. This is especially true for series models Atlant with a massive compressor, which together with products can reach 100 kg or more.
- 🏠 Wooden floor: be sure to use wide plastic or rubber pads under the legs.
- 🏢 Concrete screed: withstands any load from household appliances, but requires leveling for stability.
- 🌡️ Warm floor: installation of refrigerators with the system No Frost on a heated floor is not recommended due to overheating of the compressor, regardless of weight.
Adjusting the height of the legs allows you to compensate for uneven floors and ensure a tight fit of the doors, which also affects the durability of the hinges.
⚠️ Attention: Do not install a refrigerator Atlant near heating devices or in direct sunlight. Heating the case can lead to softening of the plastic elements and deformation of the seals, which is especially critical for heavy models with thin walls.
Common mistakes when assessing dimensions and weight
Buyers often make error by relying only on the height of the model. Refrigerators with a height of 180 cm can have different depths and widths, which directly correlates with the volume of the chambers and, therefore, with weight. Narrow models (50-55 cm wide) will be much lighter than standard ones (60 cm).
Another common mistake is ignoring the weight of the package when ordering delivery to a floor without an elevator. Loaders may charge an additional fee for each kilogram above the norm or for each flight of stairs if the weight of the unit was not taken into account in advance.
It is also worth remembering about inertia. A heavy refrigerator is more difficult to stop when moving, so when going down the stairs, the lower load-bearing one must be physically stronger than the upper one, which only directs the movement.
Questions and answers (FAQ)
Is it possible to transport the Atlas refrigerator lying on its side?
Transportation on its side undesirable, but possible over short distances if precautions are taken. The unit can only be placed on its left side (looking at the door) so that oil from the compressor does not enter the circuit. After delivery, be sure to let the refrigerator stand upright for at least 4-6 hours before turning it on.
How many people do you need to carry a two-chamber refrigerator?
For models weighing up to 60 kg, two people of average build are enough. If the weight exceeds 70 kg (for example, two-compressor models Atlant), it is recommended to involve a third person or use a cargo trolley, since it will be difficult to maintain balance on the stairs.
Does the year of manufacture affect the weight of the refrigerator?
Yes, modern models can be lighter than their analogues 10 years ago through the use of lighter composite materials and efficient insulators. However, old Soviet or post-Soviet models Atlant were often famous for their “indestructible” but heavy metal body.
Do you need to remove doors when carrying through a narrow opening?
If the opening width is less than 65 cm, Removing the doors for a standard 60 cm refrigerator is mandatory. This will reduce the weight of the structure by about 15-20 kg and reduce the overall width to 55-58 cm, which will allow you to carry the unit without damaging the walls and the refrigerator itself.