When planning the purchase of large household appliances, one of the critical, but often ignored parameters is the weight of the unit. If you choose two-chamber refrigerator a brand Indesit with a height of about 185 cm, the issue of weight becomes relevant already at the delivery stage. Heavy equipment requires the participation of professional loaders or, at a minimum, the presence of several strong assistants.
Weight directly affects stability, noise and flooring requirements. A model that is too light may vibrate when the compressor is operating, while a massive body dampens vibrations better. In this article we will analyze in detail what the mass of specific models depends on Indesithow to correctly calculate the load on the floor and what nuances to take into account when moving the device.
You should not rely on approximate estimates “by eye”. The difference between models of the same brand can reach tens of kilograms due to the type of compressor, insulation thickness and shelf materials. Accurate knowledge of the characteristics will allow you to avoid unpleasant surprises when lifting equipment to a floor without an elevator.
What determines the weight of refrigeration equipment
The main weight of any modern refrigerator falls on the compressor, condenser and metal case. Models Indesit height 185 cm most often use a classic system No Frost or a combined moisture removal system, which adds additional fans and heaters to the design. This inevitably increases the total mass compared to drip systems.
The second important factor is the volume of the internal chamber and the amount of plastic used. The more liters stated in the specifications, the more metal and insulating foam the manufacturer used. Shelves also affect the weight: tempered glass is much heavier than plastic or bars, but it is more durable.
⚠️ Attention: When calculating the load on the floor, keep in mind that the weight is distributed unevenly. The main pressure falls on four small support legs, creating a high point load that can damage weak laminate or linoleum.
Exterior finishing materials also contribute. Stainless steel, even in the form of a thin coating, adds solidity and weight to the product. At the same time, budget models with a simple enamel coating may be lighter, but they are more susceptible to mechanical damage during transportation.
Average weight indicators of Indesit 185 cm models
By analyzing the technical documentation and device passports, we can identify certain weight ranges for two-chamber models of a given height. A standard two-chamber refrigerator Indesit 185 cm tall usually weighs in the range of 55 to 75 kilograms. The exact figure depends on the specific series and year of manufacture.
Older models, released 10-15 years ago, were often heavier due to the use of thicker metal in the housing construction and less efficient but massive compressors. Modern units strive for optimization, but an increase in useful volume again pulls the weight up.
Let's consider specific examples of popular series so that you can get your bearings:
- 🧊 Models of the series DF (with the No Frost system) usually weigh about 65-70 kg, as they require a powerful fan and an additional evaporator.
- 🧊 Series with a drip defrosting system (DS or DIS) can be lighter, their weight is often 58-63 kg.
- 🧊 Wide models (60 cm or more) are always heavier than narrow ones (50-55 cm) at the same height due to the increased metal area and insulation volume.
Comparative table of characteristics of popular series
For convenience perception of information, we will summarize the data on various modifications into a single table. This will help you quickly compare the parameters and understand how difficult your potential choice will be.
| Series / Model | Height (cm) | Defrosting system | Net weight (kg) |
|---|---|---|---|
| Indesit DF 520 | 185 | No Frost | 67 |
| Indesit DS 420 | 185 | Drip | 61 |
| Indesit EF 18 | 185 | No Frost | 69 |
| Indesit IBS 20 | 185 | Drip | 63 |
As can be seen from the table, the difference between models with different cooling systems can be 5-7 kilograms. This is an essential parameter if you have to lift equipment up stairs manually. Models with marking No Frost will always be heavier than analogues with manual or drip defrosting.
It is also worth considering the gross weight, which includes packaging. A box made of thick cardboard, foam pads and fasteners add another 5-8 kg to the weight of the device. When ordering a taxi or movers, be guided by the gross weight indicated on the box.
The influence of weight on installation and operation
The weight of the refrigerator plays a key role not only during delivery, but also when installing it in a permanent place. Heavy models have greater inertia, which makes them more stable. However, if the floor is uneven, moving a 70-kilogram monolith to adjust the legs will be extremely difficult without special devices.
Lightweight models are easier to move to clean behind them, but they are more susceptible to vibrations. If the compressor is not operating perfectly, the lightweight casing may resonate and produce an unpleasant hum. In this case, the additional mass would only be a plus, dampening vibrations.
☑️ Checking the readiness of the installation site
To install a heavy unit, it is recommended to use special transport belts or trolleys. An attempt to drag Indesit weighing more than 60 kg across the floor can lead to damage to both the refrigerator itself and the floor covering.
⚠️ Attention: Never tilt a running or just turned off refrigerator at an angle of more than 40 degrees. Oil from the compressor may get into the cooling circuit, which will lead to a breakdown that is not subject to warranty repair.
Features of transportation and lifting to the floor
If you are planning independent delivery, assess your strength in advance. Climbing two-chamber refrigerator weighing 65+ kg up stairs is strictly prohibited for one person. This is a risk of back injury and damage to equipment when falling.
Even if there is an elevator, it is necessary to take into account its load capacity and the dimensions of the cabin. A standard elevator in panel houses can only accommodate a 185 cm high refrigerator in a diagonal position, which requires precise calculations. In some older elevators, you will have to remove the top shelf or transport the unit strictly vertically.
When going up and down stairs, you must hold the refrigerator vertically or with a minimum inclination. The horizontal position is permissible only if time restrictions are observed and the equipment is then allowed to settle before turning on.
Why can’t you transport the refrigerator lying down for a long time?
When transported in a horizontal position, oil from the compressor flows into the circuit tubes. If you immediately turn on such a refrigerator, the compressor will pump oil instead of freon, which will lead to water hammer and failure of the motor. The minimum settling time after horizontal transportation is 4-6 hours, or preferably a day.
How to properly move a heavy refrigerator
To safely move a massive refrigerator Indesit a number of rules must be followed. First, completely empty the cells of food and remove all removable shelves and drawers. This will not only reduce weight, but also prevent glass breakage and damage to the plastic inside.
Secondly, secure the doors. Use masking tape or special straps to prevent the doors from swinging open at the most inopportune moment and damaging the hinges or walls in the doorway. Doors must be tightly closed.
- 🚚 Use a cargo trolley with locking belts to move on a flat surface.
- 🚚 When climbing stairs, one person holds the bottom, the other holds the top, controlling the inclination.
- 🚚 Do not grab plastic handles or decorative elements of the case - they may come off.
If you order the “Loaders” service, be sure to notify the dispatcher about the presence of a refrigerator with a height of 185 cm and the number of floors. Heavy models often require a team of two people, especially if the building has narrow flights of stairs.
FAQ: Frequently asked questions
Is it possible transport the Indesit 185 cm refrigerator lying down?
Short-term transportation in a horizontal position is acceptable, but undesirable. If there is no other way out, place the unit on its side (but not on the back or door) and after installation, let it stand upright without turning on for at least 4-6 hours so that the oil flows back into the compressor.
Will the balcony floor support the weight of a two-chamber refrigerator?
It depends on the type of balcony. For open balconies and loggias in old houses, the load can be critical. A weight of 70 kg at four points of support creates high pressure. It is recommended to place wide plates under the legs to distribute the load or consult an engineer.
Why does the weight in the specifications differ from the actual weight?
The difference may arise due to rounding by the manufacturer, the use of different components in different batches, or the presence of additional equipment (for example, an ice maker). Also, the gross weight is always greater than the net weight due to packaging.
Do you need to remove the doors when lifting the refrigerator to the floor?
It is usually not necessary to remove the refrigerator doors if the openings allow you to carry it assembled. However, if the width of the apartment doorway is smaller than the width of the refrigerator, dismantling the unit doors may become necessary. It is easier to remove the doors of the entrance apartment than to tinker with the refrigerator.
Does the weight of the refrigerator affect energy consumption?
There is no direct connection between weight and energy consumption. However, heavier models often have thicker insulation walls and powerful compressors, which can indirectly affect the energy efficiency class. The main influence is exerted by the energy saving class (A+, A++) indicated in the passport.