The question of the weight of household appliances often arises acutely at the moment when it is needed movement. For owners planning to move or deliver new equipment to an apartment, it is critically important to understand the actual dimensions and weight of the unit. This is especially true for tall models, which formally belong to the two-meter category. Accurate weight equipment is determined not only by the choice of movers, but also by the requirements for the floor covering, as well as the capabilities of the elevator shaft.
Many mistakenly believe that all two-meter refrigerators have the same weight, but this is not the case. The variation in values can be significant and depends on the internal layout, type of refrigerant and number of compressors. The brand Atlant offers a wide range of models, and the mass of their two-meter modifications varies depending on the series and year of manufacture. Understanding these nuances will help you avoid unpleasant surprises when lifting equipment to the floor.
In this article we will analyze in detail what the mass of the unit depends on, give specific figures for different series and discuss how to properly organize transportation. Engineering solutions, applied by the manufacturer, directly affect the final numbers on the scales. Therefore, before purchasing or moving, you should carefully study the technical data sheet of a specific device.
Factors influencing the weight of two-meter models
The first thing to consider is the height of the camera. The phrase "2 meters" is conditional. In the manufacturer's catalogs you can find models with a height of 195 cm, 205 cm and even 220 cm. Naturally, this casing height directly correlates with the volume of metal, plastic and insulating materials used. The higher the cabinet, the more polyurethane foam and steel sheet it contains, which increases the total weight.
The second critical factor is the number of motor-compressors. Classic models are often equipped with two separate compressors: one for the refrigerator compartment, the second for the freezer. This adds weight since each compressor is a heavy metal assembly with windings and refrigerant. Modern models with a system No Frost or technology Full No Frost may have a different design, sometimes using one powerful inverter motor, which changes the weight balancing.
The third factor is the type of refrigerant and wall thickness. Older models running on R12 or R134a often have thicker insulation walls and heavier condensers located on the rear wall. New environmentally friendly refrigerants (such as R600a) require less refrigerant and allow thinner walls, which reduces the overall weight of the product. However, the presence of the system automatic defrosting adds additional sensors, fans and heaters, making the structure heavier.
⚠️ Attention: When calculating the load on the floor, take into account not only the weight of the refrigerator itself, but also the weight of the products that will be stored in it. A two-meter refrigerator loaded with products can weigh 100–150 kg more than its rated value.
Average weight of Atlant refrigerators of different heights
In order to navigate the numbers, it is necessary to consider the specific height ranges offered by the manufacturer. Standard “two-meter” models most often have a height of 205 cm. This size is the most popular in the post-Soviet space. The weight of such units usually starts from 60 kg for the simplest single-compressor models.
If we are talking about models with a height of 220 cm, which are also often classified as two-meter, their weight will be significantly higher. An increase in height by 15-20 cm adds a significant amount of materials to the structure. The average weight of such giants fluctuates around 70–80 kg. This is already a serious mass, requiring the participation of at least two people when moving.
Models with the system No Froststand apart. Due to the presence of additional fans, evaporators in both chambers and a more complex air duct system, they are heavier than their counterparts with a drip defrosting system. The difference can be from 5 to 10 kg upward. The material of the shelves also affects the weight: glass is heavier than plastic, and the presence of a metal edging adds grams, which add up to kilograms.
Weight table of popular models of the 2 meter series
For clarity, we present data on specific series that are most common in operation. The numbers may vary slightly depending on the year of manufacture, since the manufacturer periodically upgrades the design, changing component suppliers or the thickness of the case metal.
The table below presents average data. Please note that the weight is indicated for an empty device without packaging. Transport packaging (cardboard, foam plastic, tape) adds approximately another 5-7 kg to the total weight, which is important to consider when ordering movers.
| Series / Model | Height (cm) | Number of compressors | Net weight (kg) |
|---|---|---|---|
| Atlant MKhM 2808 | 205 | 2 | 66 |
| Atlant MKhM 2819 | 205 | 2 | 68 |
| Atlant MKhM 2823 | 195 | 2 | 64 |
| Atlant MHM 2826 | 205 | 2 | 69 |
| Atlant XM 4208 (No Frost) | 205 | 1 | 72 |
As can be seen from the table, even within the same height of 205 cm, the weight can vary. The model is MHM 2826 heavier than its predecessors due to the modified design of the freezer chamber and a more powerful compressor. Models with one compressor, but a system No Frostmay be heavier than two-compressor drip analogs due to the complexity of the internal filling.
Design features and weight of components
If you plan not just to transport, but also for example, when dismantling a refrigerator or replacing components in it, it will be useful for you to know the weight of the main components. The heaviest element after the housing is the compressor. The weight of one standard piston compressor used in Atlantakhis about 9–11 kg. In two-compressor models, this figure doubles.
Refrigerator doors also contribute. A refrigerator door equipped with bottle shelves and balconies weighs significantly more than an empty metal panel. Glass shelves, especially the tempered ones used in modern models, add noticeable mass. One shelf can weigh from 1 to 2 kg, and in a two-meter model there can be 4–5 pieces.
Refrigerant weight
Is it worth considering?: The mass of refrigerant in household Atlant refrigerators is only 100–150 grams. This is negligible compared to the total weight of the device, so when calculating the load on the floor or during transportation, this parameter can be neglected.
The rear wall where the capacitor is located (black grille) also has its own weight. In older models, this is a heavy steel grille welded to the body. In new models, the capacitor can be hidden in the side walls or made in the form of a lighter aluminum coil, which makes the design somewhat lighter, but makes it more vulnerable to mechanical damage during transportation.
Transportation: how to calculate the load
When ordering the services of loaders or renting a freight elevator, you must rely on the maximum weight values. If the documents indicate a weight of 65 kg, feel free to add 10% for error and packaging. For a two-meter refrigerator, the optimal solution is to call a team of two people, even if the device does not seem too bulky.
The center of gravity in tall models is shifted upward, especially if the freezer is located on top. This makes the refrigerator unstable when tilted. When moving up stairs, one person must secure the device from above, controlling its verticality, and the second must bear the main weight from below. Tilt the unit more than 40 degrees It is strictly not recommendedto prevent oil from the compressor from entering the refrigerant circuit.
☑️ Check before lifting
If there is a freight elevator in the house, check its load capacity. Standard elevators in prefabricated buildings often have a limit of 400–630 kg. The weight of a two-meter refrigerator in a package (about 75 kg) plus the weight of three adults can approach the maximum value, so you should be careful not to overload the cabin.
The influence of the year of manufacture on the weight of the refrigerator
Technologies for the production of household appliances are constantly being improved, and this is reflected in the weight of products. Refrigerators Atlantmanufactured in the early 2000s are usually heavier than their modern counterparts. This is due to the use of thicker metal for the housing and less efficient, but massive compressors.
Modern models strive for optimization. The use of composite materials for some internal elements and thinner but more effective thermal insulators reduce weight without sacrificing cooling performance. However, if you buy used equipment, be prepared for the fact that an old two-meter Atlant can weigh all of 80 kg.
It is also worth noting a change in the design of the handles. In older models, the handles were massive, often metal or heavy plastic with reinforcement. The new series (Art Design, Style) use lightweight integrated handles or hidden opening mechanisms, which also contribute to overall weight savings.
Tips for safe moving
Knowing the exact weight of your two-meter refrigerator makes it easier to plan logistics. If the weight exceeds 70 kg, the use of a special trolley for household appliances with fastening belts becomes not just a recommendation, but a necessity. This will distribute the load and avoid back injuries for loaders.
Before moving, make sure that all removable elements (shelves, drawers, egg trays) are removed from the chambers. Even one full glass shelf weighing 2 kg, falling out with a sudden jerk, can break and injure your feet or damage the floor covering. It is better to secure the refrigerator doors with masking tape in the closed position so that they do not swing open in a narrow corridor.
⚠️ Attention: Do not try to move a two-meter refrigerator along the floor, even on carpet or linoleum. This can damage the legs, bottom and, most importantly, break the tightness of the compressor tubes, which will lead to expensive repairs.
After delivery and installation in a new location, the refrigerator must be allowed to stand before turning on. If transportation took place in a horizontal position or with a strong slope, the settling time should be at least 4–6 hours (or better yet, a day) for the oil to drain into the compressor. Only after this can you connect the device to the network 220 V.
Is it possible to transport a two-meter Atlant lying down?
Transportation in a lying position is extremely undesirable for two-meter models due to the high risk of damage to the body and tubes. If there is no other way out, you can only lay it on its side (right or left, but not on the back or front panel) and always on a soft base. After such transportation, the standing time before switching on should be increased to 12–24 hours.
Why is the weight in the passport and on the scales different?
The difference may arise due to the error of the scales, moisture residues inside the system (although this is rare) or changes in the design of a particular batch. Also, the passport weight is “net weight,” and when weighing your home, you may accidentally take into account the weight of residual packaging or removable elements that were not removed.
Does the color of the body affect the weight of the refrigerator?
Almost no effect. A layer of paint or polymer coating (silver, beige, white) adds no more than 100–200 grams to the total weight, which is not significant for load capacity calculations. The main mass is determined by the steel of the case and the internal filling.