The question of how much does a Beko refrigerator weighbecomes critically important in several situations: when planning delivery, ordering the services of loaders, or preparing for installation on the upper floors of a building without an elevator. The weight of household appliances directly affects the logistics costs and physical effort required to lift the equipment. Modern models of the Turkish brand vary greatly in size and internal content, which creates a huge variation in weight indicators.
The average weight of a two-chamber Beko refrigerator varies from 50 to 90 kilograms, but the exact figure depends on the specific series and year of manufacture. Compressor system and the thickness of the insulating walls play a key role here. For example, older models with heavy metal compressors will be much more massive than modern analogues with inverter engines, even with the same volume of chambers.
For an accurate calculation, it is necessary to take into account not only the weight of the unit itself, but also the weight of the packaging if you plan to transport it in a passenger car. Net weight (without box) is usually 3-5 kg less than the gross weight stated in the store specifications. In this article we will analyze in detail what the weight of the device depends on and how to correctly calculate the load on the floor or elevator.
Factors influencing the mass of the unit
The mass of refrigeration equipment is determined by a combination of design features. The first and most obvious factor is the usable volume of internal space. The more liters the chamber holds, the more metal, plastic and refrigerant used in production. overall height and useful volume of internal space. The more liters the chamber holds, the more metal, plastic and refrigerant used in production.
The second important aspect is the number of compressors. Single-compressor models are usually lighter, as they have one motor-compressor and one pipe system. Two-compressor options, where separate circuits are provided for the freezer and refrigeration chambers, have greater weight due to the doubled amount of technical equipment.
⚠️ Attention: When calculating weight, keep in mind that older models (before 2010) often used heavier refrigerants and massive steel grates, which increased the total weight compared to modern lightweight ones designs.
The third factor is the presence of a system No Frost. Auto-defrost models come with additional fans, defrost heaters, and complex ductwork, which adds a few pounds to the bottom line. At the same time, the drip system (“Weeping Wall”) is structurally simpler and lighter.
The material of the shelves and drawers also affects the weight. Glass shelves with metal edging weigh significantly more than plastic grilles or lattice structures. If the model is equipped with metal doors (as in some premium series), this also significantly increases the weight of the product.
Weight of single-chamber models Beko
Single-chamber refrigerators are compact devices designed primarily for storing chilled products. Their weight rarely exceeds 40 kilograms, which makes them relatively convenient for one person to move, although this is not recommended due to the risk of damage to the compressor.
The average height of such models is 85 cm and width - 60 cm. Inside they may have one or two shelves and a small freezer drawer (if it is provided for in the design at all). The weight of an empty device usually starts from 25 kg for the smallest options.
- 📦 Compact models up to 100 liters weigh about 25–30 kg.
- 📦 Standard single-chamber units with a volume of 150–200 liters weigh 35–40 kg.
- 📦 Models with a metal body can be 3-5 kg heavier than their plastic counterparts.
When transporting a single-chamber refrigerator important to considerthat even with low weight it remains a bulky item. Narrow doorways can be more of a problem than weight, so measurements should be taken in advance.
Why can't you transport lying down?
When transporting lying down, oil from the compressor may drain into the cooling circuit, which will lead to water hammer when first turned on. Let the equipment stand vertically for at least 4 hours.
Weight of standard two-chamber refrigerators
Beko two-chamber refrigerators are the most popular market segment. They combine a full freezer and a spacious refrigerator compartment. This is where the weight variation is greatest and depends on the height of the case.
Models with a height of 138–145 cm (often called “medium”) usually weigh in the range of 45–55 kg. This is the optimal weight for lifting by two strong men without the use of special equipment. Higher versions, reaching 170–185 cm, are already classified as heavyweights.
Such devices use more insulating foam and a more powerful compressor to circulate cold at high altitudes. Weight can reach 65–75 kg. If the model implements technology Active Fresh Blue Light or other additional functions, the weight may be slightly higher than standard due to electronics.
| Model height | Approximate volume (l) | Net weight (kg) | Weight gross (kg) |
|---|---|---|---|
| 138 cm | 230–240 l | 48–52 kg | 54–56 kg |
| 170 cm | 270–290 l | 58–62 kg | 64–68 kg |
| 185 cm | 300–320 l | 65–70 kg | 72–76 kg |
When buying a tall refrigerator, pay attention to lift capacity. Many old elevators in residential buildings have a limit of 400-500 kg, and if there are several passengers, lifting a 70-kilogram unit can become a problem.
Heavyweights: Side-by-Side and wide models
Beko's Side-by-Side refrigerators are massive structures with hinged doors along the entire height. These are the heaviest representatives of the brand, whose weight often exceeds 100 kilograms. It is strictly prohibited to move such equipment alone.
The width of such models is 90 cm or more, and the height can reach 180–190 cm. Inside they are equipped with many additional modules: ice makers, water dispensers, freshness zones and complex control electronics. All this forms an impressive weight.
- 🏗️ Basic Side-by-Side models weigh from 90 to 105 kg.
- 🏗️ Models with a water dispenser and ice maker can reach 115–120 kg.
- 🏗️ The weight of the packaging (box, polystyrene, pallet) adds another 10-15 kg.
Installation of such giants is often required disassembling door panels. Manufacturers provide the possibility of removing doors to reduce the size when carrying, but this does not always reduce the weight that needs to be carried, since the bulk of the weight falls on the housing with the compressor.
⚠️ Attention: The floor under the Side-by-Side refrigerator must be perfectly level and support point load of at least 150 kg per leg (taking into account the safety margin and weight distribution when opening the doors).
Built-in appliances: weight features
Beko built-in refrigerators have their own design features. They do not have a decorative external cladding, instead a technical body with fastenings for furniture facades is used. This affects the final weight.
On the one hand, the absence of beautiful external panels (metal, glass, textured plastic) makes the “bare” body lighter. On the other hand, built-in models often require reinforced insulation, since they are located in a confined cabinet space where heat transfer is difficult.
The average weight of a built-in two-chamber refrigerator is 50–60 kg. When planning the installation, it is also necessary to take into account the weight of the furniture facade, which will be attached to the refrigerator door. A facade made of MDF or solid wood can add another 10–15 kg to the structure.
Installation of such devices requires special precision. Hanging the facade must be done professionally so that the hinges can withstand the load. If the facade is too heavy, this will lead to rapid wear of the opening mechanisms.
☑️ Check before installing the built-in model
The influence of refrigerant and compressor on weight
The technical content of the refrigerator is a hidden but significant factor in weight. Modern Beko models use different types of compressors. Traditional piston compressors are heavier and noisier, while new inverter models are more compact and lighter.
The type used is also important. refrigerant. The transition to environmentally friendly gases (for example, R600a isobutane) made it possible to reduce the amount of required substance and the diameter of the cooling system tubes. This led to a slight reduction in the overall weight of the equipment compared to models 10-15 years ago.
However, if we consider a specific modern model, the presence of a second compressor (in two-compressor versions) will always increase the weight. Such refrigerators are valued for the independent operation of the chambers, but you have to pay for this not only in money, but also in additional kilograms during transportation.
It is worth noting that the weight of the compressor affects the center of gravity of the device. A heavy, low compressor makes the refrigerator more stable, which is good for safety, but makes it difficult to tilt the equipment when washing the floor underneath.
Rules for transportation and lifting
Knowing the exact weight of your Beko refrigerator, you need to properly organize its movement. The main safety principle is to never lift equipment by doors, handles or plastic elements. The points of application of force must be on the base of the body or special transport handles.
To climb to a floor without an elevator, a minimum of two people are required. If the weight of the model exceeds 60 kg, it is advisable to have a third person for insurance or use special straps. The straps allow you to redistribute the weight on your shoulders and free your hands to maintain balance.
- 🚚 Use a trolley with fixation straps to move on a flat surface.
- 🚚 When climbing stairs, one person should always be at the bottom, taking the main weight on themselves.
- 🚚 Do not lean refrigerator more than 40 degrees during transportation so that oil does not get into the circuit.
If you order delivery from a store, check whether the service includes lifting to the floor. Often, drivers are ready to bring equipment only to the apartment door, and for climbing stairs they charge a separate fee, which depends on the number of steps and the weight of the load.
What to do if the refrigerator is stuck in the doorway?
Do not try to push it through by force. Remove the doors (after turning off the equipment and allowing the oil to drain), this will reduce the width by 5-7 cm.
Frequently asked questions (FAQ)
Is it possible for one person to lift a Beko refrigerator weighing 50 kg?
Theoretically, a physically strong person can lift 50 kg, but Doing this with a refrigerator is dangerous. Dimensions interfere with the girth, center