When planning a purchase or move, one of the key parameters is the mass of household appliances. Weight of a Daewoo refrigerator directly affects the choice of installation location, floor requirements and method of transportation. Heavy Side-by-Side models require the participation of professional loaders, while compact versions can be moved by two people.
The South Korean brand offers a wide range of models, where the weight varies from 35 to 140 kilograms depending on the volume of the chambers and the type of compressor. Inverter motorsinstalled in new series are often heavier than standard ones, but provide less vibration of the case during operation. Understanding the real characteristics is necessary for the safe delivery of equipment to the kitchen.
In this review, we will analyze in detail how much different categories of units weigh, and how to correctly calculate the load on the floor covering. We will also pay attention to the nuances that may arise when lifting equipment to a floor without an elevator.
Factors influencing the mass of the unit
The main parameter determining total weightis the useful volume of internal space. The more liters the refrigerator and freezer compartments hold, the more massive the walls, insulation and compressor group. Standard mid-size two-chamber models usually fall in the 60–80 kg range, which is the sweet spot for most kitchens.
The second important factor is the type of cooling system. Units with technology No Frost equipped with additional fans, evaporators and a complex air duct system, which increases their weight compared to drip systems (Direct Cool). The difference can be from 5 to 10 kilograms with the same external dimensions.
⚠️ Attention: When calculating the load on the floor, keep in mind that the weight of an empty refrigerator is not the final figure. A unit loaded with products will become 15–20% heavier.
Materials also play a role. Models coated with stainless steel (Inox) are often heavier than their enameled counterparts. In addition, the presence of additional functions, such as a display on the door or a freshness zone, adds extra pounds to the design.
Weight of compact and single-chamber models
Small Daewoo refrigerators are often chosen for offices, hotel rooms or small-sized studio apartments. Their main advantage is mobility. The average weight of such devices is from 35 to 50 kilograms. This allows one adult (if in good physical shape) or two to easily move the equipment.
Single-chamber models, where the freezer compartment is represented by a small shelf inside the main chamber, are characterized by minimal weight. They use a less powerful compressor and a thinner layer of thermal insulation. For example, a series FR-051 or similar compacts weigh about 38–42 kg.
Despite lightness; when transporting such models, one must not forget about fixing the compressor. Even a light unit can be damaged by internal tubes when shaking if the motor group is not secured with shipping bolts.
Weight of standard two-chamber refrigerators
The most popular category is two-chamber refrigerators with a lower or upper freezer. This is where the question most often comes up: “how much does a Daewoo refrigerator weigh?” The standard height of such models is 170–185 cm, and the weight varies between 65–85 kg.
Models with a bottom freezer (combi) are usually heavier due to the more massive evaporator unit at the bottom and the reinforced design of the shelves for heavy products. Systems multi-flow cooling add weight due to additional plastic elements and fans.
☑️ Check before lifting
When climbing to the floor, it is important to consider not only the weight, but also the dimensions. A narrow, but tall refrigerator may be heavier to carry due to the shifted center of gravity than a squat and wider counterpart.
Heavyweights: Side-by-Side and French Door models
Side-by-Side (side-by-side) and French Door (French door) refrigerators are real giants in the world household appliances. Their weight starts from 100 kg and can reach 140–150 kg for top models with ice makers. Moving such devices without professional equipment or the help of a team of loaders is strictly prohibited.
The design Side-by-Side uses two independent cooling circuits or one powerful compressor with a double circuit, which significantly makes the unit heavier. Thick walls, necessary to maintain temperature in a large volume, also contribute to the total mass.
⚠️ Attention: The floor in the place where a heavy refrigerator is installed must withstand a distributed load of at least 300 kg/sq.m, especially if the equipment is installed on a raised platform or plinth.
For such models, manufacturers often recommend using special transport trolleys with a wide base. An attempt to tilt the Side-by-Side unit at an angle of more than 40 degrees may result in oil leaking from the compressor into the cooling circuit.
Weight comparison table by series
To make it easier for you to navigate, we have prepared a summary table. The data are averaged for series, since the weight of a particular model FN-16B2 or RNS-415 may vary slightly depending on the year of manufacture and region of assembly.
| Refrigerator type | Series (example) | Height (cm) | Net weight (kg) |
|---|---|---|---|
| Compact | FR-051 / FN-091 | 85 – 100 | 35 – 42 |
| Two-chamber (upper sea) | FRS-160 / FRS-180 | 160 – 170 | 55 – 65 |
| Two-chamber (lower sea) | FN-16B2 / FNM-18 | 175 – 185 | 65 – 78 |
| Side-by-Side | RNS-415 / RNS-425 | 175 – 180 | 105 – 125 |
Please note that the weight "net" is indicated without packaging. When delivering by courier service, you need to add another 10-15 kg to the weight of the refrigerator itself for cardboard, foam plastic and wooden bars of the pallet.
Nuances of transportation and installation
Knowing the exact weight, you can correctly prepare the route. If the refrigerator weighs more than 70 kg, it cannot be carried by holding only the top or door - the handles often come off under load. The load-bearing elements are side walls and the lower frame.
When moving through doorways, it often becomes necessary to remove the doors from the refrigerator itself. This allows you to reduce the width and, importantly, reduce the risk of damage to the door hinges, which on heavy Daewoo models are made of durable but fragile metal when impacted.
What to do if the refrigerator is stuck in the opening?
Do not try to push it through by force. Remove doors, dismantle baseboards, or temporarily remove an interior door from its hinges. Lubricate the sides with soapy water for better sliding.
After installation in place, the heavy unit needs time to adapt. If the equipment was transported at low temperatures, it needs to stand in a warm room for at least 4-6 hours before turning it on.
Frequently asked questions (FAQ)
Is it possible to transport a Daewoo refrigerator lying down?
Transportation in a lying position is not recommended, especially for models with an inverter compressor. If this is unavoidable, the unit can only be placed on the left or right side (indicated in the instructions), but in no case on the back or door. After transportation in a horizontal position, the refrigerator must stand vertically for at least 12 hours.
Will the floor on the balcony support the weight of the refrigerator?
Standard balcony slabs in old houses ("Khrushchev") may not withstand the concentrated load from a heavy Side-by-Side (more than 100 kg). For light models (up to 50 kg), problems usually do not arise, but it is better to distribute the load by placing wide boards or plywood under the legs.
Why do different stores indicate different weights of one model?
The difference may be caused by the measurement method (gross weight with packaging or net weight without it). Also, the weight may vary depending on the configuration: the presence of an ice maker, the type of refrigerant and even the thickness of the body metal in different batches can vary by 2-3 kg.
How can I find out the exact weight of my Daewoo refrigerator?
The most accurate source is the technical sticker inside the camera (usually on the left wall or door) or in the user manual. The net weight is indicated there. If the documentation is lost, you can find the model on the Internet and look at the characteristics in the "Dimensions and weight" section.