Question about the question of how much an Electrolux refrigerator weighs often arises not just out of idle curiosity, but at moments when the equipment needs to be delivered to a floor or transported to another area. The weight of the unit directly affects the choice of loaders, the need to order elevator services and even the requirements for the strength of the floor at the installation site. Weight of the refrigerator This is not a static figure indicated in the passport, but an aggregate indicator depending on the volume of chambers, the number of compressors and the type of materials used.
Modern models of the Swedish brand, despite their spaciousness, they are often surprised by their relative lightness compared to their Soviet counterparts, which is explained by the introduction of new insulating materials. However, it produces both compact single-chamber solutions and massive two-door systems, the weight difference between which can be more than 40 kilograms. Understanding the exact dimensions and weight is necessary for logistics planning in order to avoid situations where the equipment cannot be carried into a doorway or up a narrow staircase. Electrolux produces both compact single-chamber solutions and massive two-door systems No Frost, the weight spread between which can be more than 40 kilograms. Understanding the exact dimensions and weight is essential for logistics planning to avoid situations where equipment cannot be carried through a doorway or up a narrow staircase.
Factors influencing the weight of household appliances
The main factor determining how much a refrigerator weighs is its useful volume and the number of chambers. Obviously, a two-meter unit with a freezer at the bottom will be much heavier than a narrow built-in model. Manufacturers use steel of various thicknesses for the body and internal panels, as well as different types of refrigerants, which also have their own weight, albeit insignificant. Design compressor plays a key role: inverter models are often more compact and lighter than traditional ones, but the presence of a second motor in the systems Full No Frost adds significant weight.
Do not discount additional options, such as a freshness zone, a display on the door or an ice generation system. These elements require the installation of additional equipment, plastic containers and electronics, which in total gives a noticeable increase. Thermal insulation Modern refrigerators are made of polyurethane foam, which allows them to maintain thin walls with high efficiency, which has a positive effect on the overall weight of the product.
- 🧊 Volume of chambers: each additional liter of internal space requires an increase dimensions of the case and the amount of insulator.
- ⚙️ Cooling type: systems No Frost heavier than drip counterparts due to the presence of fans, defrosting heating elements and a complex air duct system.
- 🏗️ Materials: The use of stainless steel or tempered glass in door trim significantly increases the weight compared to conventional painted metal.
⚠️ Attention: When calculating the load on the floor in old houses, keep in mind that the weight of an empty refrigerator is only half the story. A unit loaded with products can become heavier by another 30-50 kg.
Weight of Electrolux refrigerators by series
The brand's assortment Electrolux is extremely wide, and the weight of models varies depending on the series. Budget lines are often focused on minimizing production costs, which can be reflected in the thickness of the metal walls. At the same time, premium series, such as PerfectCare or Luxe Collection, use more massive components and improved sound insulation, which makes them heavier.
For clarity, it is worth considering the dependence of weight on height and type of structure. Narrow models with a width of 54-55 cm, popular in small kitchens, usually weigh in the range of 45-55 kg. Standard two-chamber refrigerators with a height of about 185 cm have an average weight of about 60-70 kg. If you choose a massive Side-by-Side, be prepared for the fact that its weight may exceed 100 kg, which requires professional delivery.
It is important to understand that even within the same series, the weight may differ by several kilograms depending on the year of manufacture and the region of assembly. Technical characteristics are updated, and the manufacturer may replace some metal elements with composite materials without changing the model name. Therefore, always check the sticker on the body of a particular instance if accuracy is critical for your calculations.
Why can the weight differ in different stores?
Different retail chains may sell modifications of the same model with different indexes. For example, a model with a silver coating may weigh a little more due to the sputtering layer, or the version for northern countries may have enhanced insulation.
Weight table of popular Electrolux models
In order not to guess with numbers, we have prepared summary data on the most popular models found on sale. These data are based on manufacturer specifications for both factory-packaged and unpackaged devices. Remember that the difference between net weight (without packaging) and gross weight (with packaging) is from 3 to 7 kgwhich is important to consider when ordering movers.
| Model | Height (cm) | Type | Net weight (kg) | Gross weight (kg) |
|---|---|---|---|---|
| Electrolux ERT 16020 | 143 | Single-chamber | 44 | 48 |
| Electrolux ENE 18730 | 178 | Double-chamber | 58 | 64 |
| Electrolux ENE 28730 | 185 | Double-chamber No Frost | 66 | 72 |
| Electrolux EHE 32425 | 189 | Two-chamber No Frost | 71 | 78 |
| Electrolux EWS 23440 | 178 | Built-in | 54 | 59 |
Analyzing the table, you can notice a direct correlation: adding a system No Frost and increasing the height by 10-15 centimeters adds approximately 5-8 kg to the weight. Built-in models, despite the absence of a decorative external body, often have a reinforced door design for fastening furniture facades, which makes them comparable in weight to free-standing counterparts.
Features of transportation and lifting floor
Knowing the exact weight of the refrigerator Electrolux, you need to properly plan its movement. Heavy models absolutely cannot be carried holding only the doors or decorative elements - the handles are often attached to a plastic frame and may not withstand the load of the entire body. Points of application of force Only special transportation holes in the rear or the lower frame of the base should serve.
When climbing up stairs without an elevator, the weight distribution between the porters should be uneven: the person holding the upper part takes on about 60-70% of the weight, since the center of gravity of most refrigerators is shifted upward due to the location of the compressor and condenser. If you plan to transport in a passenger car, make sure that the loading capacity of the interior or trunk corresponds to the weight of the unit, although this is rarely a problem for a single refrigerator.
- 🚚 Use of the dolly: For models heavier than 50 kg, it is strongly recommended to use a cargo dolly with securing straps.
- 📏 Measurements of openings: before climbing, check the width of the doorways; a heavy refrigerator is more difficult to maneuver in narrow spaces.
- 🛡️ Floor protection: when moving a heavy unit around the apartment, use thick cardboard or special pads under the legs to avoid damaging the floor covering.
⚠️ Attention: Never tilt a refrigerator that is running or has just been turned off more than 40 degrees. Oil from the compressor can get into the cooling circuit, which will lead to breakdown.
The influence of the configuration on the total weight
The weight of the refrigerator is not only metal and plastic. There are components inside the device that significantly affect the final figure. First of all, this compressor, which in modern models can be made in an open or closed case. Closed compressors, which are quieter, are usually heavier due to additional casing and sound insulation.
Shelves and drawers also add significant weight. Glass shelves, especially tempered ones, weigh significantly more than plastic racks. If the model has drawers for vegetables made of thick transparent plastic or, less commonly, metal, this should also be taken into account. Multi-flow system, which distributes the cold across all levels, requires the installation of additional plastic channels and dampers, which, although slightly, makes the structure heavier.
Models with water dispensers deserve special attention. Built-in water tanks, even empty, have their own weight, and if the system is connected to a water supply system, then water also remains in the tubes. All these little things in total can add several kilograms to the rated weight, which is important when calculating the maximum load on furniture or the floor.
☑️ Preparing to move the refrigerator
Comparison with competitors and market standards
How do refrigerators Electrolux look compared to their competitors? On average, the Swedish brand sticks to the golden mean. They are heavier than their budget Chinese counterparts, which often use thinner metal and less dense insulation, but are lighter than some premium German brands, such as Liebherr or Bosch series Maxx, which are famous for their solidity.
For example, a two-chamber refrigerator 185 cm high from Electrolux will weigh about 65 kg, while a similar model from Liebherr can reach 75-80 kg due to the use of heavier components and thicker steel. This does not necessarily indicate quality, but rather a different philosophy of construction. For the end user, the difference of 10 kg is noticeable only when climbing to the 5th floor without an elevator.
It is worth noting that the trend towards lighter equipment can be seen among all manufacturers. Engineers are looking to reduce weight to reduce shipping costs and the carbon footprint of production. Therefore, modern models Electrolux may be lighter than their predecessors from ten years ago with the same volume.
⚠️ Attention: Technical characteristics and weight of models may be changed by the manufacturer without prior notice. Up-to-date information for a specific batch of goods can always be found on the information sticker located inside the refrigerator compartment or on the back wall.
Frequently asked questions (FAQ)
Can an Electrolux refrigerator be transported lying down?
Transporting lying down is allowed, but only on the side wall or back panel (if permitted by the instructions for a specific model). It is strictly forbidden to lie on the door. After transportation in a horizontal position, the refrigerator must stand vertically for at least 4-6 hours before turning it on, so that the oil flows back into the compressor.
How many people do you need to lift the refrigerator to the floor?
For models weighing up to 60 kg, two strong people are enough. If the weight exceeds 70-80 kg (for example, models Side-by-Side or two-compressor options), it is recommended to involve a third person or use a special cargo trolley with belts.
Does the color of the refrigerator affect its weight?
Almost no. The difference in weight between a white, silver or black refrigerator of the same model will be negligible (literally a few grams) and is determined only by the thickness of the paint or spray layer. This does not affect the total weight during transportation.
Why do different sources have different weights for the same model?
Differences may be caused by the fact that the net weight (of the device itself), gross weight (with packaging) or fully loaded weight is indicated. In addition, in different years of production of the same model, components may change, which slightly changes the weight.
Do you need to remove the doors when lifting the refrigerator?
You need to remove the doors if the refrigerator does not fit into the doorway with them. Removing the doors itself will not greatly reduce the weight (you will save 3-5 kg), but it will make maneuvering in narrow corridors and stairwells much easier.