When planning a move or ordering delivery of large household appliances, the weight of the device becomes one of the critical parameters. The refrigerator Indesit height 185 cm is a classic two-chamber model, which is extremely popular due to the optimal combination of capacity and dimensions. However, it is these dimensions that imply significant weight, which must be taken into account when ascending to a floor without an elevator.
The average weight of such units varies depending on the year of manufacture, the type of compressor and the presence of additional systems, such as No Frost. Typically, the weight of an empty device ranges from 50 to 65 kilograms, but when packaged this figure can be higher. Ignoring this factor can lead to damage to floors, doorways, or even injuries during transportation.
In this article we will analyze in detail the weight characteristics of popular series, the impact of design features on weight and give practical recommendations for safe transportation. Understanding how much your Indesitactually weighs will help you correctly calculate the strength of the loaders or plan the logistics of moving equipment around the apartment.
Average weight indicators for models with a height of 185 cm
Refrigerators Indesit series EF i DS, which most often have a height of about 185 cm, are designed taking into account energy efficiency and safety standards. The basic weight of an empty device, ready for use, but without food or packaging, is usually around 55-58 kg. This value is average, since the specific figure depends on the volume of the internal space and the thickness of the walls.
It is worth considering that the weight declared by the manufacturer often refers to the “net” weight of the device itself. When transporting, you are interested in “gross” - the weight together with the transport container. The total weight of the Indesit 185 cm refrigerator in the original packaging can reach 68-72 kg, which significantly changes the requirements for the physical training of loaders.
The difference in weight between models with a drip system defrosting and more modern systems No Frost is also noticeable. The presence of additional fans, evaporators and a more complex air duct system in the freezer adds several kilograms to the total weight of the structure. Therefore, two-chamber models with full No Frost will always be heavier than their simpler counterparts.
The influence of the type of compressor on the weight of the device
The heart of any refrigerator is the compressor, and its type directly affects the overall weight of the unit. Models Indesit height 185 cm have traditionally used linear compressors, which are distinguished by their massive design and significant weight. Such devices are securely fixed in the lower rear part of the body, shifting the center of gravity down, which is important for stability.
More modern modifications can be equipped with inverter compressors. Although they are quieter and more economical, their weight may differ from classic models. However, the main contribution to the mass is made not so much by the motor-compressor itself, but by the amount of refrigerant and oil in the system, as well as the thickness of the metal walls necessary for sound insulation and thermal insulation.
When carrying A sharp tilt or jerk can lead to the compressor hitting the walls of the casing or even to breakage of the tubes. Therefore, even knowing the exact weight, you should not underestimate the inertia of the load when maneuvering in doorways.
Comparative table of characteristics of popular series
To have a complete understanding of the dimensions and weight, it is advisable to refer to the technical data sheets of specific series. Below are the data for the most common models, whose height is close to 185 cm. These figures will help you navigate when ordering special equipment or calculating the load on the floor.
| Series / Model | Height (cm) | Net weight (kg) | Gross weight (kg) |
|---|---|---|---|
| Indesit EF 18 | 185 | 56.0 | 64.5 |
| Indesit DS 185 | 185 | 54.5 | 62.0 |
| Indesit DF 5180 | 185 | 58.0 | 66.0 |
| Indesit IB 18.0 | 185 | 55.5 | 63.5 |
As can be seen from the table, the weight variation depending on the specific modification is several kilograms. It may not seem like much, but when walking up to the 5th floor without an elevator, every extra kilo feels like a significant addition. Models of the series DF (c No Frost) are traditionally heavier than simple “drop” versions.
It is also worth noting that the weight may vary slightly depending on the year of production. The use of new alloys, changing the thickness of the insulating layer or replacing the materials of the internal shelves may make adjustments to the passport data. Always check the sticker on the body of your specific instance.
Features of transportation and moving
Knowing that the average weight of a refrigerator Indesit is about 60 kg, it is necessary to properly organize the process of moving it. It is strictly not recommended for one person to lift such equipment, even if you are in good physical shape. The risk of dropping the unit or injuring your back is too great.
To move on a horizontal surface, it is best to use a special cart for household appliances with fastening belts. This will distribute the weight and free your hands to control the position of the body. When climbing stairs, at least two people are required: one holds the upper part, the other the lower, insuring against slipping.
- 🚚 Be sure to use belts to secure the doors so that they do not swing open while carrying.
- 📏 Measure doorways and corridors in advance - unfold a 60-kilogram monolith on a narrow it will be extremely difficult for the snout.
- 🧤 Wear work gloves with a rubberized coating so that the metal edges do not cut your hands, and the slippery plastic of the packaging does not slip out.
⚠️ Attention: When transporting the refrigerator never do not tilt it more than 40 degrees. This can lead to oil leakage from the compressor into the refrigerant circuit, which will cause blockage of the system and failure the first time it is turned on.
☑️ Preparing to move
The influence of equipment and additional options
The weight of the refrigerator is not only the metal and plastic of the body. Internal content also makes its contribution. Glass shelves Crystalline, which are often installed in models Indesit, are much heavier than plastic grilles. A full load of shelves can add another 5-7 kg to the weight.
The freezer also affects the weight. Having a massive freezer drawer, a metal grid above it, and a rail system adds to the overall weight. Models with a display on the outer door add the weight of the electronic module and wiring, although this contribution is minimal compared to the weight of the compressor.
If you plan to transport the refrigerator along with its internal contents (which is highly undesirable), keep in mind that each liter of food is approximately 1 kg of weight. A 300-liter refrigerator fully loaded with food can weigh more than 350 kg, which requires professional equipment to move.
Why can’t you transport a refrigerator with food?
Transportation with food is dangerous not only because of its weight. Products may shift and damage interior walls or glass shelves. In addition, if the power is turned off, the food will begin to deteriorate, and during defrosting, water will leak out, which will mix with dirt and bacteria inside the chamber.
Installation nuances after delivery
After the heavy unit has been delivered to its destination, it must be installed correctly. A weight of 60 kg creates serious pressure on the fulcrum. If the floor in the apartment is old or wooden, make sure that it can withstand such a load, especially if the legs of the refrigerator are thin.
Adjusting the legs is a critical step. Since the case is heavy, even a slight misalignment can lead to the door not closing tightly or, conversely, opening by itself. Use a building level to check levelness. Twist the front legs until the body is stable.
Do not forget about the ventilation gap. The heavy case should not stand close to the wall, but at a distance of at least 5-10 cm. This is necessary to remove heat from the condenser, which is located at the back. Violation of this rule will lead to overheating of the compressor and a reduction in service life.
⚠️ Attention: After delivery and installation of the refrigerator in a vertical position prohibited connect it to the network for at least 2-4 hours (and if transported lying down, then up to 24 hours). The oil must drain back into the compressor, otherwise the equipment will burn out.
Frequently asked questions (FAQ)
Is it possible to transport the Indesit refrigerator lying down?
Transportation lying down is possible, but undesirable. If there is no other way out, lay the unit strictly on its side (usually on the left, when viewed from the rear, but it is better to check the instructions for the specific model) and secure it so that it does not roll. After such transportation, the refrigerator must stand vertically for at least 12-24 hours before turning it on.
How many people are needed to lift the refrigerator to the floor?
For a model weighing about 60 kg, two strong people are optimal. If the house does not have an elevator and you need to climb above the 3rd floor, it is recommended to involve three people or use special carrying belts to distribute the load and not break your back.
Why does my refrigerator weigh more than what is written in the passport?
The weight in the passport is indicated for the device “net” (without packaging). Gross weight includes cardboard, foam, tape and protective films, which adds 5-10 kg. Also, the weight may vary due to ice accumulated inside (if defrosting has not been carried out) or residual water in the system.
Will an old wooden floor support the weight of the refrigerator?
A standard refrigerator weighs about 60 kg, distributed over 4 legs. This is approximately 15 kg per fulcrum, which is comparable to the weight of an adult standing on one finger. Typically, floors can withstand such a load, but if the floorboards sag or creak, it is better to install wide rubber or plastic pads under the legs to distribute the weight.