The question of how much a 185 cm high Indesit refrigerator weighs becomes critical in several situations: when planning a kitchen, ordering the services of loaders, or moving equipment along a landing. Many of the manufacturer's models Indesit have similar dimensions, but their weight can vary significantly depending on the year of manufacture, type of compressor and internal filling. The standard height of 185 centimeters is one of the most popular for modern two-chamber units, which makes this parameter in demand among users.
Understanding the exact weight of the device is necessary not only for logistics, but also for proper installation on the floor. Floor covering It must withstand the load, especially when it comes to wooden floors or fragile floors. In addition, knowing the weight helps to calculate the dimensions of the doorway and the lifting capacity of the elevator if the apartment is on the top floor. In this article we will analyze in detail the weight characteristics of various modifications and the factors influencing the total weight.
⚠️ Attention: The weight indicated in the documents is nominal. The actual weight may differ by several kilograms depending on the configuration, the presence of ice in the evaporator and the amount of refrigerant filled at the factory.
Factors influencing the weight of refrigeration equipment
The mass of the refrigerator is made up of many components, each of which contributes to the total result. The main element is compressor-condensing unit, which takes up a significant part of the weight. Models with a height of 185 cm often use more powerful motors than compact versions, which automatically increases the weight of the device. The weight also depends on the material of the shelves: glass is much heavier than plastic or grilles.
Another important factor is the type of defrosting. Models with a system No Frost always heavier than analogues with a drip system or manual defrosting. This is due to the presence of additional fans, defrosting elements and a more complex air duct system. The thickness of the thermal insulation layer also plays a role: modern environmentally friendly insulation materials can have different densities, which affects the final figures.
The dimensions of the housing directly correlate with weight. A refrigerator with a width of 60 cm will be heavier than a narrow model with a width of 55 cm at the same height. The presence of additional features, such as freshness zone or a separate compartment for freezing with an accelerated mode, adds design elements that increase weight. It is important to consider the weight of the packaging if you are planning transportation.
Weight of popular Indesit models with a height of 185 cm
Let's consider specific numbers for the most common rulers. Models of the series Indesit EF i Indesit DS often have similar dimensions, but different weights. For example, a classic two-chamber refrigerator without a No Frost system weighs on average from 55 to 60 kg. If the model contains the marking NF (No Frost), then the weight increases to 65-70 kg.
Narrow models with a width of 55 cm have a typical weight in the range of 52-58 kg. Wider versions, designed for larger families, can reach 75 kg or more. Below is a table with approximate data for popular modifications that can be found on sale or in use.
| Model | Height (cm) | Width (cm) | Net weight (kg) | Type of defrosting |
|---|---|---|---|---|
| Indesit EF 18 | 185 | 60 | 58 | Drip |
| Indesit DS 185 | 185 | 60 | 62 | No Frost |
| Indesit NBA 18 | 185 | 60 | 60 | Drip |
| Indesit NBS 18 | 185 | 60 | 64 | No Frost |
It is worth noting that the gross weight (with packaging) always exceeds the net weight by 5-8 kg. This is important to consider when ordering a taxi or loader services. The cardboard box, foam inserts and protective tapes add significant mass, which cannot be ignored when planning to climb to a floor without an elevator.
The difference between net and gross weight
When studying the technical documentation, you will come across two weight values: net and gross. Net weight is the mass of the refrigeration unit itself without any packaging. It is this parameter that affects the load on the floor and the stability of the device after installation. For most Indesit models with a height of 185 cm, it is about 60 kg.
Gross weight includes the refrigerator itself, original packaging, instructions, warranty card and sometimes additional accessories such as egg trays or ice cube trays. The packaging is made of thick cardboard and polystyrene foam, which protects the equipment during transportation, but adds weight. The difference between these indicators can be up to 10% of the total weight.
If you plan to move the refrigerator yourself, rely on the net weight, but do allowance for the fact that it will have to be carried in packaging or with doors attached. Uneven distribution of weight inside the case (for example, a displaced compressor) can create the illusion of greater weight when lifting.
Features of transportation and movement
Transporting a refrigerator with a height of 185 cm requires compliance with certain safety rules. Despite the fact that one person can theoretically move the device from its place, it is strictly prohibited to carry it alone. Center of gravity such models are displaced, and there is a high risk of dropping the unit or injuring your back. The best option is the participation of two people.
When moving up stairs, it is important to take into account the inclination. The refrigerator can be tilted, but the angle should not exceed 40 degrees. A higher tilt may cause oil to leak from the compressor into the refrigerant circuit, causing damage. If the tilt does occur, the device will need sludge before turning it on.
⚠️ Attention: After transporting the refrigerator in a horizontal position or with a strong tilt, do not plug it in for at least 4-6 hours. This time is necessary for the oil to drain back into the compressor.
Use a special cart for household appliances with a wide base. This will allow you to secure the body with straps and distribute the load evenly. If there is no cart, make sure the path is clear of obstacles and there are no slippery mats on the floor.
☑️ Preparing to move
The influence of internal filling on the load
An empty refrigerator weighs significantly less than a filled refrigerator. However, when calculating the load on the floor or furniture, the maximum load must be taken into account. Shelves made of tempered glass can withstand up to 25-30 kg, but if all the boxes are filled with food, the total weight of the device can increase by 40-50 kg.
Freezers become especially heavy when fully loaded with meat or frozen vegetables. Ice crust on the evaporator (in models without No Frost) also adds extra pounds. Regular defrosting not only helps maintain operational efficiency, but also reduces the overall weight of the device.
Vegetable boxes are usually made of plastic and are light in themselves, but filled with root vegetables they create a significant point load on the bottom of the refrigerator. Make sure the drawer slides are secure, especially in older models where the plastic may have lost its strength.
Why shouldn't you put hot food in the refrigerator?
Hot food raises the temperature inside, causing the compressor to work longer and harder. This increases energy consumption and wear of parts, and can also lead to the formation of ice and increased weight due to ice.
How to find out the exact weight of your model
The most reliable way to find out the exact weight is to look at the technical data sheet of the device. All parameters are indicated there, including net and gross weight. If the documentation is lost, find the information sticker on the refrigerator body. It is usually located inside the camera, on the side wall or on the back panel.
The sticker contains serial number, model, release date and technical specifications. Knowing the exact model (for example Indesit C 185 G), you can find the specification on the Internet on the manufacturer's official website or in the instruction archives. Do not rely solely on visual assessment, as modifications of the same series may differ.
If the sticker is not readable or is missing, you can weigh the device on an industrial scale, which is often available at service centers or home appliance stores. This will give the most accurate result for a specific instance, taking into account all possible changes in the design.
FAQ: Frequently asked questions
Is it possible for one person to lift the Indesit 185 refrigerator cm?
Technically, you can move it from its place, but lifting and carrying it alone is strictly not recommended. A weight of 60 kg is difficult for one person to control; there is a high risk of back injury or falling of the device.
How much does a refrigerator with packaging weigh?
The gross weight is usually 5-8 kg more than the net weight. For a model with a height of 185 cm, this is approximately 65-72 kg, depending on the density of the packaging materials.
Does the color of the case affect the weight?
No, the color of the coating (enamel, stainless steel) does not have a significant effect on the total weight. The difference may be only a few grams, which does not matter during transportation.
Why do different sources have different weights for the same model?
Differences may be caused by rounding of data, changes in equipment in different years of manufacture, or the use of different types of refrigerant and compressors within the same model line.
Do I need to remove the shelves during transportation?
Yes, this is highly recommended. Glass shelves can crack from vibration, and their removal will reduce the risk of damage to the internal walls and slightly reduce the weight, although not significantly.