When planning a move or ordering new household appliances for the kitchen, one of the key parameters is the weight of the unit. The question of how much an Indesit 2 meter refrigerator weighs often arises among those who plan to deliver it themselves or are afraid of damaging the flooring in the apartment. Two-meter models belong to the category tall refrigerators, and their dimensions directly affect the stability and load on the floor.
The average weight of such equipment varies depending on the year of manufacture, the volume of the chambers and the materials used. Typically, a two-meter unit without packaging pulls 50–70 kg, which requires the participation of at least two people when moving. Understanding the exact mass is necessary not only for logistics, but also for correct level adjustment, since the heavy case must stand perfectly level.
In this article we will analyze in detail the weight characteristics of popular series, the influence of design features on the mass and give practical advice to Poke. Indesit produces many modifications, and the difference in weight between them can be significant. Knowing these nuances will help you avoid unpleasant surprises when lifting equipment up stairs.
Average weights for two-meter models
The standard height of 200 cm (or 202-205 cm) is typical for most modern models with an upper freezer. The weight of such devices is rarely a fixed value, since manufacturers are constantly changing the wall thickness and insulation composition. Models Indesit are characterized by a weight ranging from 52 to 68 kilograms, depending on the configuration.
Older models, released 10-15 years ago, often turned out to be lighter than modern counterparts due to the use of less dense materials and the lack of additional sound insulation systems. Modern units can be heavier due to the increased compressor volume and thicker panels, ensuring energy efficiency class A+ or higher.
It is worth considering that the weight stated in the documentation is often indicated net, that is, without taking into account packaging. When ordering loader services, it is important to remember about the dimensions of the box, which add another 5–8 kg to the total weight. This is critically important when calculating the lifting capacity of an elevator or the possibility of skidding up a narrow staircase.
⚠️ Attention: The weight indicated in the technical data sheet may differ from the actual one by ±2-3 kg due to manufacturing tolerances and the residual amount of refrigerant in the system.
If you plan to install on a weak floor (for example, in a wooden house or on the balcony), it is necessary to carry out preliminary load calculations. A two-meter refrigerator creates a point pressure on the four support legs, which, if distributed incorrectly, can lead to deformation of the coating.
Factors influencing the weight of the refrigerator
Why can two outwardly identical models have different weights? The main factor is the volume of internal space and the thickness of the thermal insulation layer. The more cameras and the more spacious they are, the more massive the body. The weight is also influenced by the type compressor: inverter models can weigh differently than classic linear units.
The material of the interior trim and shelves also plays a role. Glass shelves are significantly heavier than plastic racks, and having a glass bottle rack adds additional weight. Metal rear walls (capacitors) in some models make the structure heavier compared to smaller aluminum or steel counterparts.
Availability of the system No Frost or Low Frost requires the installation of additional fans and evaporators, which inevitably affects the total weight of the unit. Models with a drip defrosting system are usually a little lighter than their more technologically advanced counterparts. In addition, the number of doors and their design (for example, the presence of a display on the door) make their own adjustments.
- 🧊 Chamber volume: Larger refrigerators require more metal and insulation.
- ⚙️ Type compressor: Differences in motor design affect the weight of the lower part.
- 🚪 Door material: Glass or metal weigh more than regular plastic.
- ❄️ Cooling system: Additional No Frost elements add weight.
It is important to understand that the weight is distributed unevenly. The main heaviness is concentrated in the lower part, where the motor-compressor is located, and in the upper part, if there is a massive freezer chamber there. This creates a specific center of gravitythat must be taken into account when tilting the device.
Weight table of popular Indesit models
For ease of comparison, we have compiled a table with the approximate characteristics of popular two-meter models. Data is taken from official specifications and may vary slightly depending on the year of production of a particular batch.
| Refrigerator model | Height (cm) | Net weight (kg) | Total volume (l) |
|---|---|---|---|
| Indesit DF 5200 W | 200 | 62 | 360 |
| Indesit ITS 4200 W | 185 (close model) | 54 | 320 |
| Indesit DS 320 W | 202 | 65 | 370 |
| Indesit EF 20 | 200 | 58 | 340 |
| Indesit C 320 | 202 | 66 | 372 |
As can be seen from the table, the difference in weight between models of similar height can reach 10 kilograms or more. The model Indesit DS 320 W is one of the most massive in its class due to its increased depth and volume. On the contrary, the series EF is often designed to be more compact and lightweight for ease of installation in small kitchens.
When choosing a model, pay attention not only to the height, but also to the depth. Deeper refrigerators often have a reinforced frame, which also affects the final weight. If you are limited in weight (for example, a weak floor on a loggia), it is better to choose a model with a smaller volume or plastic interior elements.
Features of transportation and lifting
Moving a two-meter refrigerator is not an easy task and potentially dangerous for an inexperienced person. The weight of 60 kg, distributed on an awkward-to-grip body, creates the risk of falling or damaging the equipment. It is strictly not recommended to drag the unit, as this can damage both the floor and the legs of the refrigerator itself. When climbing stairs without an elevator, special care must be taken. One person should support the device from above, controlling its stability, and the second should bear the main weight from below. It is important not to tilt the refrigerator more than 40 degrees so that oil from the compressor does not enter the refrigerant circuit. refrigerator.
Take special care when climbing stairs without an elevator. One person should support the device from above, controlling its stability, and the second should bear the main weight from below. It is important not to tilt the refrigerator more than 40 degrees to prevent oil from the compressor from entering the refrigerant circuit.
⚠️ Attention: After transporting in a horizontal position or with a strong tilt, be sure to let the refrigerator stand upright for at least 4 hours before turning it on.
Use special belts for carrying heavy objects or a cargo cart. If you order delivery, check with the service to see if the service includes floor lifting, as standard rates are often limited to the apartment door only. For models weighing more than 50 kg, the presence of a second loader is often a mandatory safety requirement.
☑️ Preparing for moving
If the house has narrow doorways, the refrigerator often has to be tilted or the doors removed. Removing the doors can reduce the weight of the structure by 10–15 kg, which will greatly facilitate maneuvering. However, this operation should only be carried out with the appropriate tools and skills.
The influence of weight on installation and operation
Correct installation of a heavy two-meter unit guarantees its long and silent operation. The legs of the refrigerator must be unscrewed so that the body is stable and does not wobble. If the floor is uneven, a heavy refrigerator will create vibration, which over time can lead to breakage of the compressor Vibration is the main enemy of heavy equipment. When the motor is running, the heavy housing can resonate with the floor, creating an unpleasant hum. To avoid this, special anti-vibration pads can be placed under the legs. This is especially true for models weighing more than 60 kg, where the inertia of mass movement when starting the compressor is large. compressor or destruction of internal fastenings.
Vibration is the main enemy of heavy equipment. When the motor is running, the heavy housing can resonate with the floor, creating an unpleasant hum. To avoid this, special anti-vibration pads can be placed under the legs. This is especially true for models weighing more than 60 kg, where the inertia of mass movement when starting the compressor is high.
It is also worth considering the load on the furniture if the refrigerator is built-in or is in a niche. The furniture must be designed to support the weight of the set itself plus the weight of the refrigerator filled with food. On average, a full refrigerator is 20–30 kg heavier than an empty one, which creates an additional static load.
Is it possible to place a refrigerator on a carpet?
It is not recommended to place a heavy refrigerator on a long-pile carpet. The lint blocks air from reaching the condenser (often located at the bottom or rear), causing the compressor to overheat. In addition, the carpet allows dust and moisture to accumulate, causing corrosion of the bottom.
Regularly checking the installation level will help extend the life of the device. If you notice that your refrigerator is making a louder noise than usual, check to make sure it is level. Sometimes it is enough to slightly tighten the adjusting screws to eliminate the noise caused by the skew of the heavy case.
FAQ: Frequently asked questions
Is it possible to lift a two-meter Indesit refrigerator alone?
Technically, lifting a weight of 60 kg is possible, but doing this is strictly not recommended. The dimensions of the case make the grip uncomfortable, and there is a high risk of dropping the equipment or injuring your back. It’s safer to call an assistant or use a cargo cart.
Is the weight of models with No Frost much different from the drip system?
The difference is usually 3-5 kg in favor of models with No Frost due to the presence of an additional fan, heater and a more complex air duct system. However, the main weight still depends on the volume and thickness of the walls.
How can I find out the exact weight of my model without scales?
The most accurate way is to find a sticker with technical data (usually inside the refrigerator compartment or at the back) and look at the model. Then find the official specification of this model on the Internet by searching “model + characteristics”.
Does the weight of the refrigerator affect energy consumption?
There is no direct connection. Weight depends on the amount of materials, and energy consumption depends on the efficiency of the insulation and compressor. However, heavier models often have thicker insulation walls, which may indirectly indicate better cold retention.