Weight of LG refrigerators: complete table by model and advice on transportation

When you are planning a purchase or move, weight refrigerator LG becomes a critical parameter - it determines whether the kitchen floor will hold up, whether the help of movers will be required, and even the cost of delivery. Few people know that the difference between lightweight single-chamber models and massive ones can be as high as transporting two adult men! In this article, we will look at what the mass of equipment depends on, provide current data on popular series Side-by-Side can reach 150 kg - it's like transporting two grown men! In this article we will look at what the mass of equipment depends on and provide current data on popular series LG (including 2026-2026 models) and give practical advice on safe transportation.

You will be surprised, but the weight of the refrigerator affects not only logistics. For example, for built-in models, the maximum load on the furniture frame is often limited 80–100 kg, and for installation on the second floor of old houses, reinforcement of the floors may be required. We will also reveal why some LG with the same volume weigh differently (spoiler: it's in the cooling system and case materials).

What determines the weight of an LG refrigerator

If you compare two models with the same useful volume (for example, LG GA-B459SQPL and LG GB-B459PMCZ), the difference in mass can reach 15–20 kg. Here are the key factors that shape this parameter:

• 🔹 Refrigerator type: single-chamber (up to 40 kg) vs. two-chamber (60–90 kg) vs. Side-by-Side (120–180 kg).
• 🔹 Cooling system: models with No Frost heavier due to additional fans and evaporators (for example, LG GC-L247CLAV weighs 78 kg, and a drip model of similar volume weighs 65 kg).
• 🔹 Materials: stainless steel cases (series Signature) are 10–15 kg heavier than plastic ones.
• 🔹 Additional functions: ice makers (+5–8 kg), water dispensers, touch panels.
• 🔹 Compressor: inverter motors (for example, in the series LG InstaView) are lighter than traditional ones by 3–5 kg.

Interesting fact: refrigerators LG with technology DoorCooling+ (uniform distribution of cold air) often weigh 7–10 kg more due to reinforced hinges and door seals. And models with the function Smart ThinQ may have additional weight from electronic modules.

Table of weights of LG refrigerators by series (2026–2026)

We analyzed the technical data sheets of more than 50 models LG and compiled a summary table. Please note: the weight is indicated without packaging (in the box it is added 10–25 kg due to foam and cardboard). For accurate data, always check the characteristics of the specific model on the manufacturer’s website - parameters may vary depending on the region of delivery.

As can be seen from the table, even among Side-by-Side the weight variation is significant. For example, LG GSX961MCBZ weighs 135 kg, and a model similar in volume LG GR-N609SLQL is narrower 150 kg due to the reinforced body and additional insulation. This is important to consider when choosing a model for a kitchen with laminate or parquet. the load on the floor can be 200–250 kg/m².

⚠️ Attention: If you buy a refrigerator LG for installation on the second floor of an older house 1990, be sure to check the load-bearing capacity of the floors. For models weighing more than 100 kg reinforcement of the floor or distribution of the load on several supports may be required.

How weight affects installation and operation

The weight of the refrigerator is directly related to:

• 🚪 Transportation: for models over 80 kg a minimum of 2 loaders or special equipment is required (for example, a trolley with clamps) the cost of delivering such refrigerators to the floor may increase by 30–50%.
• 🏠 Installation: built-in models (for example, series LG Studio) often have weight restrictions for furniture frames. Exceeding the load leads to deformation of the facades.
• 🔧 Repair: heavy refrigerators. (120+ kg) is more difficult to deploy to access the compressor or condenser. This increases the cost of service.
• 🌡️ Energy consumption: more massive models usually have powerful compressors, which can increase energy consumption by 10–15%.

Practical example: when installing LG GC-B247SLUV (weight 72 kg) in a kitchen with tiles on a heated floor, the client did not take into account that the legs of the refrigerator were not adjustable in height. As a result, the appliance stood on a slope, which led to uneven wear. door seal and increase energy consumption by 20%.

How to properly transport a heavy refrigerator. LG

Transporting a refrigerator weighing 100+ kg is not only physical activity, but also a risk of damaging equipment. Here is a step-by-step algorithm that professional movers use:

1. Preparation: turn off the refrigerator for 12–24 hours before transportation, defrost, secure the doors with tape (but do not block them completely - this may damage the seal).
2. Packaging: use the original box or bubble wrap at least thick 5 mm. Pay special attention to the corners and doors.
3. Loading:
   • For models up to 80 kg: 2 people and a trolley with belts.
   • For Side-by-Side (120+ kg: you need 3-4 people and special straps for uniform weight distribution.

Transportation: the refrigerator must stand vertically If necessary. lay on its side, choose the side opposite to the compressor (usually this is indicated in the instructions). Maximum tilt angle - 40°.

Unpacking: after delivery, do not turn on the refrigerator at least 2–4 hours (for models with an inverter compressor - 6 hours). This time is needed to stabilize the pressure in the system.

Make sure the doors are locked|Check the fastening of shelves and drawers|Use a trolley with belts|Prepare a route without narrow turns|Insure the equipment in case of a fall-->

Critical mistake: many people forget that when transported in a horizontal position, oil from the compressor can get into the cooling circuit. This leads to engine jamming and expensive repairs. In models LG with a linear compressor (Linear Inverter), the risk is especially high - they can only be transported vertically!

⚠️ Attention: If you are transporting a refrigerator LG in a freight elevator, check its load capacity. For example, in standard elevators of panel houses the limit is 300–400 kg, but taking into account the weight of the trolley and packaging, this can be critical for models Side-by-Side.

The weight of the refrigerator and its impact on repairs

The weight of equipment directly affects the cost and complexity of repairs. Here are the key points:

• 🔧 Access to the compressor: in heavy models (100+ kg) to replace the motor or capacitor, you need to unfold the refrigerator, which cannot be done alone. This increases the cost of work by 20–30%.
• 🛠️ Replacing doors: in Side-by-Side the weight of one door can reach 25–30 kg. To dismantle it, you need special ties.
• 🧊 Freon leakage: in massive refrigerators (LG series Signature) there is more refrigerant, so refilling is more expensive.
• 📦 Spare parts logistics: for models weighing 150+ kg parts (for example, evaporators) are often supplied to order, which increases the repair period.

Example: replacing a compressor in LG GA-B489TGPL (weight 75 kg) costs an average of 8 000–12 000 ₽, and in LG GSX961NSAZ (140 kg) - already 15 000–20 000 ₽ due to the difficulty of accessing the nodes.

Why do heavy refrigerators break down less often?

Massive models (for example, LG series Signature) have thicker thermal insulation and reinforced fastenings of parts. This reduces compressor vibration and the risk of freon leaks. However, their repair is more expensive due to the high cost of spare parts.

How to reduce the weight of a refrigerator before moving

If you need to transport a heavy model LG (for example, Side-by-Side weight 150 kg), you can temporarily reduce its weight on 10–15 kg. Here's what you can do:

• 🧊 Remove all removable elements: shelves, drawers, door balconies. On models with an ice maker, drain the water and remove the reservoir.
• 📄 Remove decorative panels: in series InstaView a glass door adds 5–7 kg.
• 🔌 Remove the back cover (if it is removable) - this will reduce the weight by 3–5 kg and make access to the compressor easier during repairs.
• 🧲 Use neodymium magnets for fixing doors instead of tape - they can withstand loads of up to 50 kg and do not damage the seal.

Important: do not try to remove the compressor or the capacitor on its own - this can lead to freon leakage and breakdown. For models with the system No Frost it is also not recommended to dismantle the internal panels - this breaks the seal.

Common mistakes when choosing a refrigerator by weight

Many buyers lose sight of the key nuances associated with the weight of the equipment. Here are the most common mistakes:

• 🏢 Ignoring the load-bearing capacity of the floor: in houses with wooden floors, the maximum load is 150–180 kg/m². Refrigerator LG GSX961MCBZ (135 kg) + person weighing 80 kg = risk of floor sagging.
• 🚪 Not taking into account the width of the doorways: Side-by-Side width 90+ cm may not fit into a standard opening (80 cm). You will have to dismantle the door frame.
• 🔌 Purchase without taking into account the weight of the package: the refrigerator 70 kg weighs in the box 90–95 kg. This is critical for delivery to upper floors without an elevator.
• 🛠️ Neglecting to adjust the legs: unadjusted legs on an uneven floor increase the load on one side, which leads to deformation body.

Advice from the experts: if you choose a refrigerator for a summer house with a wooden floor, give preference to lightweight models (50–60 kg) or install additional supports for heavy equipment. For example, under LG GB-B459PMCZ (85 kg) four rubber gaskets with a thickness of 2 cm.

⚠️ Attentionare enough: When purchasing a refrigerator LG on credit, some banks take into account the weight of the equipment when assessing the collateral. Models over 100 kg can be considered "illiquid" due to the difficulty of transportation during withdrawal.

FAQ: Answers to frequently asked questions about the weight of LG refrigerators

🔹 Why are LG refrigerators with No Frost heavier than drip refrigerators?

Models with No Frost have additional fans, evaporators and heating elements for defrosting. This adds 5–15 kg to the total weight. For example, LG GA-B459SQPL (No Frost) weighs 68 kg, and a drop model of similar volume weighs 60 kg.

🔹 Is it possible to transport an LG refrigerator in a passenger car?

Depends on the model:

• Single-chamber (40–50 kg): a sedan with the rear seats folded is suitable.
• Two-chamber (60–90 kg): you need a station wagon or crossover (for example, Kia Sportage).
• Side-by-Side (120+ kg): only cargo van with a lift.

Important: even for light models, use anti-slip mats and fixation belts.

🔹 Which LG refrigerator is the lightest?

The lightest models are single-chamber with mechanical controls. For example:

• LG LTCS20223S: 38 kg (volume 190 l).
• LG LTCS24223S: 42 kg (volume 230 l).

Their weight is comparable to a large washing machine, so transportation will not be difficult.

🔹 Does weight affect the noise level?

Indirectly - yes. Heavy models (100+ kg) usually have a more massive body and better quality. sound insulation, therefore they operate more quietly (38–40 dB). Lightweight refrigerators (40–50 kg) can vibrate more, especially on uneven floors, which increases the noise to 42–45 dB.

🔹 How much does the package of an LG refrigerator weigh?

The weight of the package depends on the model:

• Single chamber: 5–10 kg.
• Double-chamber: 10–15 kg.
• Side-by-Side: 20–25 kg (due to additional foam inserts to protect the doors).

For example, LG GSX961MCBZ weighs 135 kg, and in the box - 160 kg.