Weight of Nord refrigerators: how to choose a model by size and weight

When you are planning to purchase a refrigerator Nord, its weight becomes one of the key parameters - especially when it comes to moving, installing in a kitchen with limited load on the floor, or transporting it up stairs. Few people think about this in advance, but incorrect weight calculation it can lead to problems: from damage to the floor covering to the inability to deliver equipment to the apartment without movers.

In this article we will look at what the weight of refrigerators depends on Nord, we will provide accurate data on popular models (including built-in and Side-by-Side), and we will also give practical advice on transportation and installation. You will learn how compare the weight with analogues of other brandswhy two-chamber models are heavier than single-chamber ones, and what to do if the weight exceeds the permissible load on your floor.

What does the weight of a Nord refrigerator depend on?

The weight of equipment is formed from several key components, and y Nord - as a brand with a wide range - the spread can be significant: from 30 kg for mini-refrigerators to 150+ kg for premium Side-by-Side. Here are the main factors:

• 🔹 Type compressor: Inverter models (for example, series Nord NRB) weigh 10-15% more due to the enhanced cooling system.
• 🔹 Case material: Refrigerators with stainless steel (series Nord Premium) are 20–30 kg heavier than plastic ones.
• 🔹 Number of chambers: Two-chamber models (freezer + refrigerator) on average 40–50 kg heavier than single-chamber ones.
• 🔹 No Frost system: Additional fans and evaporators add 5–8 kg to the total weight.

For example, Nord NRF 618-101 (single-chamber, 140 l) weighs about 40 kg, while Nord NRB 167-019 (two-chamber, No Frost, 300 l) - already 85 kg. The difference is almost double!

Weight of popular Nord models: comparison table

We have collected data on the most popular refrigerators Nord on the market (relevant for models released after 2020). Please note: the weight may vary slightly depending on the modification (for example, the presence of a water dispenser).

⚠️ Attention: If you buy a refrigerator Nord with delivery, check with the seller weight in packaging —it can exceed the net weight by 10–20 kg due to foam protection and cardboard boxes.

How does weight affect installation and operation?

The weight of the refrigerator is directly related to three key aspects:

1. Floor load: Standard tiles or laminate can withstand up to 200–250 kg/m². For models weighing >100 kg (for example Nord NR-SBS 520), reinforcement of the base may be required.
2. Transportation: Refrigerators >70 kg are recommended to be transported in a freight elevator or with the help of professional loaders. Side-by-Side models (120+ kg) cannot be carried manually up stairs - there is a risk of damage to the compressor!
3. Vibration: Heavy refrigerators (especially with inverter compressors) require a perfectly flat surface, otherwise noise and wear of parts will increase.

Practical example: owners Nord NRB 167-019 (85 kg) often encounter the fact that the equipment “walks” when opening the door if the floor is uneven. The solution is to use anti-vibration stands or adjustable feet.

Comparison of the weight of Nord with other brands

To understand how much heavier or lighter refrigerators are Nord analogues, we compared them with popular models ATLANT, Samsung i LG of similar volume. The data is given for two-chamber models 250–300 l:

• 🏆 Nord NRB 167-019 (300 l) - 85 kg
• 🥈 ATLANT XM 6025-031 (280 l) - 78 kg
• 🥉 Samsung RB-30 J3200EF (311 l) - 82 kg (but with the Twin Cooling system, which justifies the weight)
• ⚖️ LG GA-B489 YDQZ (230 l) - 70 kg (the lightest due to the plastic case)

As you can see, Nord does not stand out from the average values, but some models (for example, with stainless steel) may be heavier by 10–15%. The main difference is weight distribution: Nord often a more massive back wall due to enhanced thermal insulation.

⚠️ Attention: If you choose between Nord i ATLANT, keep in mind that the latter often have lighter compressors, but less durable door seals. This may affect energy consumption in the long term.

How to properly transport a heavy Nord refrigerator?

Transporting equipment weighing >50 kg requires special preparation. Here are step-by-step instructions to help avoid damage:

Pack all shelves and drawers separately (use bubble wrap)

Secure the doors with tape (but do not block them completely!)

Unplug the refrigerator 12 hours before transport (to defrost)

Use a trolley with fixation belts for models >80 kg-->

Critical mistakes that 90% of users make:

• 🚫 Transportation in a horizontal position (risk of damage to the compressor).
• 🚫 Ignoring door fixation (lead to deformation of the hinges).
• 🚫 Using ropes instead of specialized belts (can cut through the body).

For models Nord Side-by-Side (120+ kg) be sure to rent hydraulic trolley or order the "lift to the floor" service from the transport companies. The cost of such a service averages 500–1500 rubles, but it is cheaper than repairing a bent case.

What happens if you transport the refrigerator lying down?

During horizontal transportation, oil from the compressor can get into the cooling circuit, which will lead to blockage capillary tube. In 70% of cases this requires replacing the compressor (cost ~15,000 rubles). The exception is models with transport bolts (for example, Nord NRB 122-010), but even they can be tilted no more than 40°.

Built-in Nord refrigerators: weight features

Built-in models (for example, series Nord Built-in) have unique characteristics:

• 🔧 Their weight indicated without a facade — after installing the door, the weight will increase by 5–10 kg.
• 🔧 They are 15–20% lighter than free-standing analogues due to the absence of an external enclosures.
• 🔧 Require reinforced fastenings to the furniture frame (especially models >60 kg).

Example: Nord NRF 567-001 (built-in, 250 l) weighs 55 kg, but after installing the MDF facade, the weight will reach 60–65 kg. Important: during installation, use mounting corners with a load of ≥80 kg, otherwise the door may sag in 1–2 years.

Frequently asked questions about the weight of Nord refrigerators

❓ Is it possible to independently carry a Nord refrigerator weighing 80 kg up the stairs?

Theoretically, yes, but only with an assistant and special equipment (carrying straps, knee pads). Practice shows that without experience, the risk of equipment damage or back injury is ~60%. For models >70 kg, we recommend ordering movers (cost in Moscow: 1500–2500 rubles).

❓ Why is the Nord refrigerator heavier than the similar ATLANT in volume?

Main reasons: thicker thermal insulation (y Nord — 60 mm versus 50 mm in ATLANThere, steel body parts (often plastic), as well as inverter compressors, which are 3-5 kg heavier than usual. This is a plus for durability, but a minus for transportation. ATLANT often plastic), as well as inverter compressors, which are 3–5 kg heavier than conventional ones. This is a plus for durability, but a minus for transportation.

❓ How to find out the weight of your Nord model if it is not in the table?

The weight is always indicated in technical passport (section "Characteristics") or on the sticker on the back of the refrigerator (next to the serial number). If the documents are lost, find the model on the website nord.ru (in the product card) or use the service Search by serial number in the brand's personal account.

❓ Does weight affect energy consumption?

Indirectly - yes. Heavier models usually have powerful compressors and better thermal insulation, which reduces energy consumption by 10-20%. For example, Nord NRB 167-019 (85 kg) spends 350 kW/year, while light Nord NRF 105-003 (32 kg) - 420 kW/year.

❓ Is it possible to put a Nord refrigerator on a wooden floor?

It is possible, if:

1. The weight of the refrigerator is ≤ 100 kg.
2. The thickness of the boards is ≥ 40 mm.
3. They are used shock-absorbing stands (for example, Nord Anti-Vibration Pads).

For models >100 kg (for example, Nord NR-SBS 520) a concrete base or reinforced floor with metal beams is required.