When choosing a refrigerator Stinol, many are faced with the need to know its exact weight - be it to calculate delivery, check the strength of the floor, or plan a move. The brand, owned by the corporation Indesit Companyoffers models with weights from 40 kg (compact single-chamber) to 120+ kg (double-chamber with system No Frost). But how do you find out exactly how much your model weighs? And why is this parameter so important?
In this article we have collected current data on the weight of all popular lines Stinol — from STN 167 to STN RF 428 W, and also explained how to correctly interpret the technical specifications. You will find out why the weight can differ even for models of the same volume, how to check it without documentation, and what hidden risks the incorrect transportation of heavy units is fraught with.
Spoiler: the weight of the refrigerator directly affects not only logistics, but also energy consumption, noise level and even how long the compressor will last. And we will also reveal one little-known nuance about the weight of refrigerators with the No Frost system, which is not written about in the instructions.
Why the weight of a Stinol refrigerator is important: 5 key reasons
The weight of household appliances is not just a number passport. Depend on it:
- 🚛 Delivery cost. Courier services charge transportation by weight: for example, a refrigerator up to 50 kg can cost 1,500 rubles, and over 100 kg - already 3,500+.
- 🏠 Floor strength. In old houses, floors are designed for a load of 150–200 kg/m². A two-chamber Stinol weighing 110 kg on an area of 0.6 m² gives a load of ~183 kg/m² - close to the limit!
- 🔧 Installation difficulty. Models heavier than 80 kg are recommended to be installed with an assistant, especially if you need to climb stairs.
- ⚡ Energy efficiency. The heavier the refrigerator, the more powerful the compressor (as a rule), which means the higher the energy consumption.
- 🔄 Recycling. In some regions, the fee for removal of bulky waste depends on the weight of the equipment.
In addition, weight indirectly indicates quality of materials. For example, models Stinol with a weight of less than 50 kg often have thin walls and simplified thermal insulation, which affects the service life.
Table of weights of Stinol refrigerators by model (2026–2026)
Below are the current data for the popular series of the brand. Please note: weight may vary within ±3 kg even for identical models from different batches.
| Model | Type | Useful volume (l) | Weight (kg) | Features |
|---|---|---|---|---|
| STN 167 | Single-chamber | 140 | 42–45 | Compact, mechanical control |
| STN 175 | Single-chamber | 160 | 48–50 | Enlarged freezer compartment |
| STN 190 | Double-chamber | 260 | 65–68 | System Direct Cool, class A+ |
| STN RF 388 W | Two-chamber | 340 | 85–88 | No Frost in both chambers, display |
| STN RF 428 W | Two-chamber | 380 | 105–110 | Inverter compressor, freshness zone |
⚠️ Attention: In the table indicated net weight (without packaging). When shipping, add 5-10kg per box and foam inserts. For example, STN RF 428 W in the original packaging it will weigh about 115–120 kg.
How to find out the weight of your Stinol refrigerator without documentation
If the equipment passport is lost and the model has been erased from the sticker, use one of these methods:
- Serial number. Locate the metal plate on the back wall (usually bottom left). The line
Model NoorTypewill contain a code, for example STN 190-01. Enter it into a search engine with the query “weight”. - Dimensions. Measure the height, width and depth of the refrigerator (in cm), then use the formula:
Approximate weight (kg) = (Height × Width × Depth) / 1500For Stinol the coefficient varies from 1400 (light models) to 1600 (with
No Frost). - Chamber volume. The sticker inside the refrigerator often contains information about the capacity. Compare it with our table above.
- Weighing. Place the refrigerator on the floor scales (after emptying the products). For models over 100 kg, use truck scales or loading platforms.
🔍 Secret life hack: If the refrigerator is already in the kitchen, try moving it manually. Models up to 60 kg move without effort, 60-80 kg - with noticeable resistance, over 100 kg are practically motionless without any effort. help.
What to do if the weight exceeds the declared one?
Sometimes the difference of 5-7 kg is associated with additional shelves or accessories (for example, bottle holders. If the discrepancy is more than 10 kg, check:
- Is there a second compressor installed inside (typical for models with a separate freshness zone).
- Are there any hidden defects - for example, a freon leak, which was “masked” with additional weighting.
- Have the parts been replaced previously (a new motor can weigh 3-5 kg more original).
Why do Stinol refrigerators with No Frost weigh more: technical nuances
Models with the system No Frost (for example, STN RF 388 W or STN RF 428 W) are heavier than analogues with Direct Cool by 15–25 kg. Reasons:
- 🌀 Fans. For uniform air distribution, 1-2 fans are required (each weighs up to 1.5 kg).
- 🔥 Heating element. An evaporator with a heating element for defrosting adds ~3. kg.
- ❄️ Reinforced thermal insulationThe walls are 10–15 mm thicker to compensate for heat loss from air circulation.
- 📦 Additional sensorsSystem. data-i="149">equipped with temperature and humidity sensors (module weight - up to 0.8 kg).
No Frostequipped with temperature and humidity sensors (module weight - up to 0.8 kg).
Little known fact: Stinol refrigerators with No Frost are not only heavier, but also have a shifted center of gravityDue to the fans and the motor, the upper part of the unit is 20-30% heavier than the bottom. This is important to consider when transporting in a lying position - you need to put the refrigerator down. to the side wall, and not on the back!
How many people are needed to carry the Stinol refrigerator
The number of assistants depends not only on the weight, but and from designs models:
| Refrigerator weight (kg) | Recommended number of people | Carrying features |
|---|---|---|
| Up to 50 | 1–2 | Can be carried manually, but carefully - the compressor is sensitive to shock. |
| 50–80 | 2 | Use belts for uniform load distribution. Lift by the lower part! |
| 80–100 | 3 | Gloves and special grips are required. It is better to use a trolley. |
| Over 100 | 4 or loaders | Professional equipment is required (hydraulic trolley, couplers). |
⚠️ Attention: When carrying refrigerators Stinol with inverter compressor (models STN RF 428 W and newer) is strictly prohibited:
- 🚫 Tilt housing by more than 40° - this can lead to oil leakage from the compressor.
- 🚫 Turn upside down - even for a short time.
- 🚫 Shake or drop - inverter motors are sensitive to vibrations.
Disconnect from the network 12 hours before transportation|Secure the doors with tape or straps|Remove all shelves and drawers|Wrap the body with bubble wrap|Use a cart with clamps-->
How weight affects installation and operation
The weight of the refrigerator is directly related to:
- Vibration. Heavy models (over 90 kg) vibrate less due to a stable center of gravity. But if the floor is uneven, even a 100-kilogram Stinol can “walk” when the compressor is running.
- Noise. Lightweight refrigerators (up to 50 kg) are often equipped with less powerful but noisier compressors (noise level up to 42 dB). Heavy - quieter (36–38 dB).
- Energy consumption. The greater the weight, the higher the energy efficiency class. For example, STN RF 428 W (110 kg) consumes ~350 kW/year, and STN 167 (45 kg) - up to 420 kW/year.
- Durability. Models weighing over 80 kg usually have a reinforced housing and a compressor with a service life of 15+ years.
💡 Practical advice: If your Stinol weighs less than 60 kg and still makes loud sounds, check:
- Correct installation (use a level for leveling).
- Condition of the compressor shock absorbers (they could be worn out).
- Gap between the wall and the refrigerator (must be at least 5 cm for air circulation).
Common mistakes when working with heavy refrigerators
Even experienced users sometimes miss important details:
- 🔌 Connecting to an outlet. Refrigerators weighing over 90 kg require a grounded outlet with a rating of at least 16A. Otherwise, during a power surge, the starting relay may burn out.
- 🧊 Defrosting. In models with
No Frostyou cannot break off the ice with a knife - this will damage the air duct system, which will lead to weight gain due to ice. - 🔄 Rearrangement. After moving, the refrigerator must stand at least 6 hours before turning on - this time is needed to stabilize the oil in the compressor.
- 📏 Dimensions of the doorway. Before purchasing, check whether the refrigerator will fit on stairs. For example, STN RF 428 W (width 60 cm) may not fit into a 58 cm opening due to packaging.
⚠️ Attention: If you notice that the refrigerator Stinol began to weigh more for no apparent reason (for example, 70 kg instead of 65 kg according to the passport), this may indicate:
- Ice accumulation in the drainage system (typical for models with
Direct Cool). - Leakage of freon and weight compensation due to oil (urgent repair required!).
- Violation the tightness of the door seal, which causes moisture to accumulate inside.
FAQ: Answers to frequently asked questions about the weight of Stinol refrigerators
Is it possible to transport a Stinol refrigerator lying down in a car?
Yes, but only on side wall (not on the back!) and for no longer than 2 hours. Before transportation, secure the compressor with transport bolts (if they are provided for in the design for models with No Frost lying transportation). not recommended - it is better to use a freight elevator or trolley.
Why does the new Stinol refrigerator weigh more than indicated in the passport?
The difference is up to 5 kg - the norm (packaging, additional accessories. If the difference is greater, check:
- Not installed). is there a second compressor (in models with a freshness zone).
- Is there an additional shelf or container included in the package?
- Are you mistaken with the model (for example, STN 190 and STN 195 look similar, but weigh 65 kg and 72 kg respectively).
What is the maximum weight of a Stinol refrigerator for installation on the second floor of a wooden house?
For wooden floors, the safe limit is 80). kg (distributed over an area of at least 0.5 m². If the weight is greater, it is required:
- Reinforce the floor with additional beams.
- Install the refrigerator in the corner of the room (the load is distributed more evenly there).
- Use anti-vibration stands.
For models over 100 kg (for example, STN RF 428 W) the first floor or concrete base is recommended.
Does weight affect the price of a Stinol refrigerator?
Indirectly - yes. Heavy models are usually more expensive due to:
- More powerful compressor (inverter).
- Systems
No Frost. - Reinforced thermal insulation.
For example, STN 167 (45 kg) costs ~25,000 rubles, and STN RF 428 W (110 kg) - from 50,000 rubles.
Is it possible to reduce the weight of the refrigerator before moving?
Yes, but partially:
- Remove all shelves, drawers and doors (saving up to 10 kg).
- Remove the compressor (only if it is faulty and you take the refrigerator for recycling!).
- Replace the glass shelves with plastic ones (the difference is ~2 kg per shelf).
⚠️ Do not try to remove thermal insulation or freon - this will disrupt the operation of the refrigerator and make it dangerous to use.