Modern refrigerators Beko equipped with well-thought-out control systems, however, finding the right setting sometimes causes difficulties for users who are encountering this technology for the first time. Correct setting of the temperature regime is critical for the safety of food and the durability of the compressor, since deviations can lead to rapid spoilage of food or the formation of excess ice.
In this article we will look in detail at how to set the temperature in various models of refrigerators Beko, from mechanical regulators to advanced electronic panels with a display. You will learn about the standard values for different compartments, the features of the Super Freeze and Ecomodes, as well as how to interpret flashing indicators that indicate problems.
Before you start setting up, it is important to understand that each refrigerator is individual, and the factory settings may not suit your current needs or the load of the chambers with products. Proper calibration will help save energy and provide ideal storage conditions for meat, vegetables and dairy products.
Differences between electronic and mechanical controls
Refrigerators of the Turkish brand are divided into two main groups according to the type of control, and the approach to setting the temperature in them is radically different. In older or budget models, it is used mechanical thermostat, represented by a rotary handle inside the refrigerator compartment. On the scale of such a regulator there is usually no degree marking, but only numbers from 1 to 5 or from Min to Max, where a higher value corresponds to a lower temperature.
More modern models, such as series Beko CN or RCNE, are equipped with an electronic control panel, located on the outside of the door. Here the user sees exact digital values in degrees Celsius, which allows you to set the mode with an accuracy of one degree. Electronics also allow you to independently regulate the climate in the freezer and refrigerator compartments, which mechanical analogues do not have.
⚠️ Attention: If you suddenly change the position of the mechanical thermostat knob, do not expect an instant result. The compressor takes from 30 to 60 minutes to stabilize the internal temperature according to the new settings.
If you are the owner of a model with a display, then control is carried out through touch buttons or physical keys under the screen. Clicking on the appropriate icon (usually a snowflake for the freezer and a drop or thermometer for the refrigerator) allows you to toggle the values. In some models, to activate the setting mode, you need to hold the button for 3 seconds, which protects against accidental changes by children.
Optimal temperature conditions for different compartments
To ensure food safety and maximum equipment efficiency, it is necessary to adhere to the values recommended by the manufacturer. In the refrigeration chamber, the range from +2°C to +5°Cis considered ideal. At this temperature, bacteria multiply slowest, and products do not freeze, maintaining their structure and taste.
The freezer requires lower values; the mode -18°Cis considered standard. It is at this temperature that most bacteria completely cease their activity, and products can be stored for months without loss of quality. Setting a value lower, for example -24°C, makes sense only when fast freezing fresh products, but not for permanent storage.
The freshness zone (Zero Zone) deserves special attention, if it is provided in your model. Beko. This compartment maintains a temperature of around 0°C and special humidity, which is ideal for storing fresh meat, fish and vegetables that you plan to cook in the coming days.
Below is a table of recommended settings for various types of products so that you can guide when planning your load:
| Product type | Recommended zone | Temperature conditions | Shelf life (approximate) |
|---|---|---|---|
| Fresh meat/fish | Bottom shelf / 0°C zone | 0..+2°C | 1-3 days |
| Dairy products | Middle shelves | +2..+4°C | 3-7 days |
| Vegetables and fruits | Drawers below | +5..+8°C | 3-10 days |
| Frozen semi-finished products | Freezer compartment | -18°C and below | up to 12 months |
Instructions: setting the temperature on the display
The process of setting the temperature on models with electronic control is intuitive, but has its own nuances depending on the specific series of the refrigerator. First, make sure your device is connected to the network and the display is active. If the screen goes dark, the energy saving mode may be turned on, and you will need to press any control key to activate the buttons.
To change the settings in the refrigerator compartment, find the button with a thermometer image or caption Fridge. Press it until the desired value lights up on the display. The freezer is configured in the same way, but a button Freezer or an image of a snowflake is used. After selecting a value, wait a few seconds until the indicator stops blinking - this means that the command has been accepted by the controller.
☑️ Display setting algorithm
In some models with function Smart Cooling or Wi-Fi connection, settings may be locked when Child Lock mode is activated. If the buttons do not respond to presses, look for a key combination to unlock, usually this is holding two buttons simultaneously for 3 seconds, which is indicated in small print on the panel.
⚠️ Attention: The interface of the control panels may vary depending on the model year. If the described actions do not lead to results, check the exact sequence in the official user manual for your specific modification.
Adjusting the mechanical thermostat
In models without a display, adjustment is carried out using a rotary switch, which is most often located on the inner wall of the refrigerator compartment, sometimes hidden behind plastic casing or located next to the light bulb. The scale of such a regulator does not display degrees, but shows conventional units of cooling power.
Position 1 or Min means minimum cooling (highest temperature inside), and position 5 or Max —maximum compressor power. For everyday use in the summer, it is recommended to set the regulator to the middle position, usually these are numbers 2 or 3. In winter, when the room is cool, the load on the compressor can be reduced by switching the knob to 1 or 2.
Why can't you set the mechanics to MAX all the time?
Constant operation at maximum power leads to rapid wear of the compressor, excessive power consumption and possible freezing of food at the rear walls, even if the temperature sensor is working properly.
If you have just loaded a lot of warm products, the sensor may not “feel” the real increase in temperature below for a long time, so in such cases it is better to temporarily increase the cooling and then return the regulator to normal.
Using special operating modes
Refrigerators Beko offer a number of special functions that change the standard operating algorithm of temperature sensors. Mode Super Freeze (Super Freeze) forcibly turns on the compressor at maximum power, lowering the temperature in the freezer to -24°C and below. This is necessary when loading a large amount of fresh products so that they quickly freeze and do not lose their properties.
Mode Eco or "Economy" slightly increases the temperature in the chambers (for example, up to +7°C in the refrigerator compartment), which can significantly reduce energy consumption. This mode is convenient when you go on vacation and leave the refrigerator empty, or in winter in a well-heated room where it’s already cool.
- 🧊 Holiday Mode — turns off the refrigerator compartment, leaving the freezer to work, which prevents the appearance of mold and odor in the empty refrigerator during your absence.
- ❄️ Fast Freeze —analogous to Super Freeze, but often with a time limit operation, after which the refrigerator itself returns to standard settings.
- 💡 Smart Cooling - an intelligent system that itself analyzes the frequency of door openings and the temperature in the room, adjusting the operation of the unit.
Activation of these modes is usually done using separate buttons on the control panel. The indicator light of the button indicates that the function is active. To turn off, just press the button again or wait for the cycle to automatically complete if the function has a timer.
Deciphering indicators and eliminating errors
The refrigerator electronics constantly monitor the status of the system and report problems through flashing indicators or alphanumeric codes on the display. If you see a flashing red light or alarm symbol, this most often means that the temperature in the chamber is higher than the established norm. This happens after the first turn on, defrosting, or if you kept the door open for a long time.
In more serious cases, the display may show an error code, for example E1, E2 or F4. These codes indicate a malfunction of specific temperature sensors in different areas of the refrigerator. For example, an error may indicate that the evaporator sensor is showing incorrect data, or the connection between the control module and the sensor is broken.
⚠️ Attention: If the error code does not disappear after rebooting the refrigerator (unplug for 10-15 minutes), do not try to repair the electronics yourself. Contact an authorized service center, as replacement of the sensors or re-flashing of the board is required.
You should also pay attention to the indicator Alarm or sound signal. If it does not turn off after the door is closed and the temperature drops, the reed switch (door position sensor) may be faulty or the rubber seal is not sealing tightly, letting warm air in.
What should you do if all the indicators are flashing?
If all the symbols are flashing at the same time, this often indicates a malfunction of the electronic control module. Try turning off the power to the refrigerator completely for 30 minutes. If the problem persists, a specialist diagnosis is required.
Frequently asked questions and answers (FAQ)
Why does the Beko refrigerator not keep the temperature even after setting?
There may be several reasons: the door is not tightly closed due to debris on the seal, the location of the refrigerator is too close to heating devices, a faulty thermostat or Freon leak. Check the integrity of the rubber seals and free access of air to the rear grill.
How to reset the temperature settings to factory settings?
In most models, it is enough to unplug the refrigerator from the outlet for 10-15 minutes. After switching on, the electronics will return to factory settings. In some models with Wi-Fi, the reset can be performed through a mobile application Beko HomeWhiz in the device settings section.
Is it possible to set the temperature below -24°C in the freezer all the time?
Technically, some models allow this, but manufacturers do not recommend this mode for constant use. This leads to significant waste of electricity and a reduction in compressor life. The standard -18°C is completely sufficient for long-term storage.
Does the temperature in the room affect the refrigerator settings?
Yes, it does directly. If the room is very hot (above +30°C), the refrigerator has a harder time dissipating heat and may operate at its maximum capacity even at standard settings. In winter, at temperatures below +10°C, some models may stop turning off if you do not switch them to winter mode (if provided).