When moving or buying new household appliances, one of the first questions to arise is logistics, namely: how much does the Atlant refrigerator weigh? This parameter is critical not only for selecting a suitable truck, but also for assessing the physical effort that will be required when climbing to the floor. Modern models of the Belarusian manufacturer differ significantly in weight from their Soviet counterparts, but still remain quite heavy units.
Weight directly depends on the dimensions of the case, the volume of the chambers, the type of compressor and the presence of additional functions, such as the No Frost system. Understanding the exact weight will help you avoid unpleasant situations when equipment gets stuck in a doorway or turns out to be too heavy for available movers. In this article, we will analyze in detail the characteristics of the various series and give practical advice on moving them.
It is worth considering that even a small difference in the height of the case can add several kilograms to the total weight, which significantly affects the maneuverability of the device in narrow corridors. In addition,
Factors influencing the weight of refrigeration equipment
The main factor determining how much a refrigerator weighs is its volume and number of chambers. Double-chamber models, as a rule, are heavier than single-chamber analogues due to the increased area of heat exchangers and more insulating material. Wall thickness The housing also plays a role: modern energy efficiency standards require high-quality insulation, which adds mass to the unit.
Materials used for production, contribute to the total mass. Metal shelves, heavy glass doors and a massive compressor - all this adds up to the final figure. Inverter compressors, which are now often installed in new models, may be lighter and more compact than traditional ones, but their introduction has not yet radically reduced the overall weight of the devices.
⚠️ Attention: When calculating the load on the floor or ceiling of a balcony, take into account not only the weight of the refrigerator itself, but also the weight of the food that will be stored in it. A full refrigerator can be 50-100 kg heavier than an empty one.
The presence of an automatic defrosting system or complete No Frost also makes the design heavier. Additional fans, evaporator heaters, and complex ductwork require space and materials. Therefore, models with manual defrosting often turn out to be lighter than their more technologically advanced counterparts of the same height.
Weight of Atlant refrigerators depending on height
The most A simple way to classify mass is to group it by body height. This is a standard metric that allows you to quickly navigate the approximate weight range. The higher the model, the more metal, plastic and refrigerant it contains.
Models up to 140 cm in height are classified as compact. Their weight usually varies between 35–45 kg. Such refrigerators are often chosen for small kitchens, cottages or offices. Two people can lift such equipment up the stairs without using a special trolley, although the presence of carrying straps will not hurt.
The middle category includes devices with a height of 145 to 170 cm. This is the most popular market segment, where the weight ranges from 50 to 65 kg. Here you can already feel the difference: carrying requires good physical shape or the use of aids. Particular attention should be paid weight distribution when lifting, so as not to injure your back.
Tall models, whose height exceeds 175 cm, are real giants. Their weight often exceeds 70 kg, and in the case of two-compressor versions it can reach 85 kg or more. Atlant refrigerators above 2 meters are less common, but their weight requires a professional approach to transportation. It is better not to experiment with such units alone.
Weight table of popular models of Atlant refrigerators
For accurate logistics planning, it is best to rely on specific manufacturer data. Below is a table with the characteristics of popular series that are most often found in sale and operation.
| Series / Model | Height (cm) | Net weight (kg) | Design features |
|---|---|---|---|
| Atlant 4008 (KSh 210) | 145 | 48 | Single compressor, classic |
| Atlant 4502 (KSh 230) | 168 | 58 | Increased volume, No Frost optional |
| Atlant 6021 (KSh 300) | 205 | 74 | Two-compressor, full No Frost |
| Atlant 6221 (KX 310) | 205 | 78 | Two-compressor, increased width |
| Atlant 3398 (KX 210) | 148 | 52 | With the Full No Frost system |
The table shows that even with the same height, the weight may differ by several kilograms. This is due to the different configuration and type of refrigerant used. Two-compressor models always heavier, as they contain two motors and a double piping system.
Please note that the weight in the table is indicated “net”, that is, excluding packaging. When ordering a cargo taxi, be sure to check the "gross" weight, which includes the cardboard box, foam pads and shipping bolts. The difference can be from 5 to 10 kg, which is significant for loaders.
Features of transportation and lifting to the floor
Knowing the exact weight refrigerator Atlant, you can properly plan its movement. If you live in a building with a freight elevator, the problem is easily solved. However, in many cases it is necessary to lift equipment up stairs manually or using a freight elevator, which may not be suitable in size.
When climbing stairs, it is critically important to follow safety precautions. A refrigerator weighing more than 60 kg becomes a dangerous projectile in the hands of inexperienced loaders. Tilt angle When carrying, it should not exceed 40 degrees so that oil from the compressor does not enter the refrigerant circulation circuit.
- 🚚 Use a special trolley with fastening belts for moving on a flat surface.
- 🧗♂️ Always carry the refrigerator on the stairs so that the person below holds the bulk of the load.
- 🔒 Be sure to secure the doors with tape or standard belts before moving.
⚠️ Attention: It is strictly forbidden to tilt a refrigerator that is running or has just been turned off by more than 45 degrees. This can lead to oil leaking into the system and subsequent failure of the compressor.
If you plan to transport it in a passenger car, keep in mind that even folded seats may not allow you to place a tall refrigerator vertically. Horizontal transportation is possible, but requires strict adherence to the rules: only on the rear side walls (indicated on the label) and with subsequent exposure before switching on.
☑️ Preparation for transportation
The influence of the cooling system on the weight
The cooling system is the “heart” of the refrigerator, and it significantly affects its weight. The traditional drip system (Direct Cool) is simpler and lighter. In such models, the evaporator is hidden behind the rear wall, and the water flows into a tray above the compressor. The weight of such devices is minimal for their size group.
System No Frost (or Full No Frost) adds complexity to the design. Fans, additional heating elements, sensors and an extensive network of air ducts increase the mass. In addition, such refrigerators often use a thicker layer of insulation to prevent condensation, which also adds weight.
The weight difference between a model with a drip system and a Full No Frost of the same series can reach 5-7 kg. This is not critical for a stationary installation, but is noticeable when going up to the 5th floor without an elevator. Manufacturability always has its price, expressed in kilograms.
Why are two-compressor refrigerators heavier?
They have two separate motor-compressors, two capacitors and double the number of copper tubes. In addition, they often have more powerful insulation for independent operation of the chambers.
Tips for moving heavy models
If you get a heavy two-chamber Atlant refrigerator weighing under 80 kg, do not rely on luck. It is better to spend time preparing than treating a back injury or restoring a broken unit. Use available means: thick blankets to protect corners, strong tape and, if possible, belts for carrying furniture.
When passing through doorways, remove the doors from the refrigerator, if the design allows it. This will not only reduce the dimensions, but also shift the center of gravity, making the device more stable. However, remember that removing doors requires tools and time, and may affect your warranty if not done carefully.
- 🛡️ Wrap the frame in stretch film to protect the finish from being scratched by the jambs.
- 👥 Use at least two people to carry it, even if you think you can do it yourself.
- 👟 Use non-slip shoes when moving equipment up stairs.
After delivery, allow the refrigerator to “settle”. If it was transported lying down or tilted strongly, the compressor needs time for the oil to flow back into the crankcase. For models with a conventional compressor, 2-4 hours are enough, for inverter models and after strong inclinations - up to 12-24 hours.
⚠️ Attention: Do not plug in the refrigerator immediately after bringing it from the cold into a warm room. Condensation inside electronic components can cause a short circuit. Allow the equipment to warm up to room temperature.
Frequently asked questions (FAQ)
Is it possible to transport the Atlant refrigerator lying down?
Transportation in a horizontal position is not recommended by the manufacturer, but is possible if strict rules are followed. The unit should only lie on the side wall specified in the instructions (usually the one where there are no pipelines). After such transportation, the refrigerator must stand upright for at least 12 hours before turning it on.
How much does the heaviest Atlant refrigerator weigh?
The heaviest are the two-compressor models of the 6000 and 7000 series with the Full No Frost system. Their weight can reach 85-90 kg, depending on the specific modification and year of manufacture. These are full-fledged large-volume refrigerator cabinets.
Do you need to remove the shelves during transportation?
Yes, this is a mandatory procedure. Glass shelves and plastic drawers may break or damage the interior walls of the chamber if shaken. In addition, unloading the contents significantly reduces the overall weight of the refrigerator, making it easier to carry.
Does the color of the case affect the weight of the refrigerator?
No, the color of the enamel or coating (silver, white, beige) does not affect the weight of the device. The weight depends solely on the design features, the volume of the chambers and the type of installed equipment.