Modern refrigerators Beko touch display devices are complex electronic devices that require precise calibration to ensure proper operation. Many users are faced with a situation where the equipment works, but the products are not cooled to the required values or, on the contrary, freeze. Correct setting is a key factor in the durability of the compressor and maintaining the freshness of the products.
Unlike mechanical regulators, touch panels allow you to control the climate in each chamber separately, as well as activate special operating modes. However, it is the abundance of functions that often leads to confusion when the user accidentally activates the super freeze mode or turns off the main cooling circuit. In this article, we will look in detail at how to return your refrigerator to optimal temperature conditions.
Before starting deep settings, it is important to understand that the touch screen responds to touches, but requires a certain sequence of actions to enter the settings menu. Do not rush to press all the buttons in a row, as this may disrupt the current parameters of the controller. It is best to proceed sequentially, checking the readings after each change.
Basics of operation of the touch control panel
The refrigerator control interface Beko is designed with ergonomics in mind, but its logic may not be obvious to those who first encounter digital control. The panel is usually located on the top of the door and contains temperature indicators for the freezer and refrigerator compartments. The main buttons are responsible for selecting the camera and changing numerical values.
To change the temperature, you must first select the desired zone (refrigerator or freezer) by pressing the appropriate button. Once the light starts flashing, you can change the values using the arrow buttons or the plus and minus symbols.
⚠️ Note: If the touchpad is locked (the lock icon is lit), any adjustment attempts will be ignored. To unlock, you typically need to hold down the key button or combination of buttons for 3 to 5 seconds until you hear a beep.
Touch buttons may be less responsive if they are stained with oil or moisture. Before setting, wipe the panel with a soft, dry cloth. This will ensure the accuracy of entering commands and prevent accidental switching of modes, which is especially important when setting exact values degrees Celsius.
Optimal temperature conditions for different chambers
The concept of “normal cold” may vary depending on the load of the refrigerator and the time of year, but There are strict standards recommended by manufacturers and sanitary regulations. For a refrigerator, the ideal range is +2°C to +5°C. Under these conditions, bacteria multiply slowly, and food does not freeze at the back wall.
The freezer requires lower temperatures for long-term storage. The standard value is -18°C. If you set the temperature higher, for example -12°C, the shelf life of meat and fish will be significantly reduced. Setting values below -20°C increases power consumption without significant benefit for most products.
For setting, use the following table as a guide to set the correct parameters on your display Beko:
| Camera type | Recommended temperature | Acceptable range | Impact on products |
|---|---|---|---|
| Refrigeration | +4°C | +2°C.. +5°C | Optimal for meat, dairy products |
| Frozen | -18°C | -16°C.. -20°C | Standard for deep freezing |
| Zone freshness | 0°C | -1°C.. +2°C | For fish, meat for a short period of time |
| Vegetable compartment | +5°C.. +7°C | +4°C.. +8°C | Prevents vegetables from freezing |
It is worth considering that the actual temperature inside the chambers may differ from the readings on the display due to the frequency of opening the door. Therefore, after the initial setup, it is recommended to check the actual climate using an external thermometer left inside overnight.
Step-by-step instructions for setting the temperature
The process of setting up a refrigerator Beko with a touch screen requires care. First, make sure that the device is connected to the network and has been operating normally for at least 6 hours. If you have just defrosted the refrigerator or transported it, it is too early to make adjustments - the compressor must enter the operating cycle.
Follow the following steps to set the basic parameters:
- 🌡️ Press the chamber selection button (usually indicated by a snowflake symbol for the freezer or a droplet for the refrigerator) until the desired indicator lights up.
- 🔼🔽 Use the adjustment buttons to change the flashing numeric value to the required value (for example, +4 for a refrigerator).
- ⏳ Wait 5-10 seconds until the indicator stops flashing and lights up constantly - this means that the command has been accepted by the controller.
- 🔁 Repeat the procedure for the second chambers, if it is necessary to change the parameters in the freezer compartment.
☑️ Check after setting
After setting the parameters, do not open the doors unnecessarily for several hours. This will allow the system to quickly dial the specified temperature mode. If after 24 hours the food is still not chilled, additional diagnostics or a lower setting may be required, if the model allows.
Use of special functions and modes
Modern models Beko are equipped with additional functions that can significantly affect the temperature inside the chambers. One of the most common is the Super Freeze (Super Freeze) mode. When activated, the compressor operates continuously, ignoring the set limits, in order to freeze food as quickly as possible.
This mode should be used with caution. If you leave it on for a long time, the temperature in the freezer may drop to -24°C or lower, and in the refrigerator compartment, on the contrary, it may become too cold due to the redistribution of air flows in some models No Frost. Automatic shutdown usually occurs after 24–50 hours, but it is better to control this process manually.
There is also a Holiday Mode. It's designed to save energy when you're away for long periods of time. In this mode, the refrigerator compartment is heated to +14°C (to prevent mold and odor from appearing), and the freezer continues to operate as normal. Do not confuse these modes when setting the "normal" cold for everyday use.
⚠️ Attention: The "Eco" or "Energy Saving" mode may limit the maximum compressor power. If you need to quickly cool a large amount of food, make sure that the energy-saving functions are not activated, otherwise the desired cold will not be achieved.
Some models allow you to adjust the fan speed or the intensity of the evaporator through hidden menus, but for the average user, standard factory presets are sufficient. Interfering with the engineering menu unnecessarily can lead to incorrect operation defrosting algorithms.
What is dynamic cooling?
Dynamic cooling in Beko refrigerators is a system that evenly distributes cold air across all shelves, preventing the mixing of odors and drying out of products. It works automatically and does not require manual adjustment, except for setting the general temperature.
Diagnostics of cooling problems
If you have set the correct values on the touch screen, but the refrigerator does not cool, the problem may lie not in the settings, but in a technical malfunction or operating conditions. First of all, check the tightness of the door. Even a slight misalignment or contamination of the seal leads to a constant flow of warm air, which the compressor does not have time to cope with.
Pay attention to the location of the products. In system refrigerators No Frost the ventilation holes on the back wall cannot be covered. If the air does not circulate, the temperature sensor may indicate normal, while the depths of the shelves will be warm. Correct air circulation is critically important.
A common mistake is to install the refrigerator close to the wall or in a niche without gaps. The radiator on the rear panel must be blown with air. If heat is not removed, cooling efficiency drops, and no amount of electronic adjustment will help. Check if there is a gap of at least 5–10 cm from the back wall of the device to the wall of the room.
- 🔍 Check whether the air ducts inside the chamber are not blocked by products.
- 🧊 Make sure that there is no thick ice crust on the evaporator (a sign of a malfunction of the defrost system).
- 🔌 Check the network voltage - if the voltage is low, the compressor may start, but not develop the required power.
If after checking all external factors and recalibrating the settings, the problem persists, the temperature sensor, thermostat may have failed, or a refrigerant leak has occurred. In such cases, you need to call a technician to carry out professional diagnostics.
Frequent errors during operation and their impact on the cold
Users often make mistakes that negate all efforts to set things up correctly. One of the most common is placing hot or warm foods inside. This causes a sharp jump in temperature and humidity, causing the system to wear out, and the touch sensor may temporarily show incorrect data due to local overheating of the area next to it.
Another mistake is installing the refrigerator near heat sources (radiators, stoves, in direct sunlight). In such conditions, the refrigerator Beko will constantly try to compensate for external heating, which may lead to the fact that it simply cannot reach the set mode, working idle.
You should also not completely fill the chambers with food immediately after purchase or defrosting. An empty refrigerator (or completely filled with warm food) takes longer to operate. It is optimal to fill the volume gradually, giving the system time to stabilize heat balance.
⚠️ Attention: Do not set the temperature in the refrigerator compartment below +2°C in normal operation. This can lead to freezing of vegetables and dairy products, as well as freezing of the outlets of the No Frost system.
Questions and answers (FAQ)
Why do the values on the screen reset after setting the temperature?
This may occur due to power surges or a short-term power outage. It is also possible that the electronic control module may malfunction. If the problem persists, check the socket and try to perform a full reset (if the model has such a function) or unplug the refrigerator for 15 minutes.
Is it possible to configure a Beko refrigerator via a smartphone?
Some modern models Beko support the HomeWhiz function and are controlled via Wi-Fi. In the application you can change the temperature and modes. However, the basic setting of “normal cold” is always available and more reliably done directly from the touch panel on the door.
What temperature is considered normal for the freshness zone?
For the freshness zone (Zero Zone) a temperature of about 0°C is considered optimal. In this mode, food does not freeze, but remains fresh much longer than in the main chamber. The setting is made separately if your model provides independent control of this zone.
What to do if the touch screen does not respond to touches?
Try wiping the screen with a dry cloth. If this doesn't help, the child lock may be enabled. If unlocking does not help, a software failure could have occurred - disconnect the refrigerator from the power supply for 10-15 minutes to reboot the controller.