We rehang the refrigerator door ourselves: from preparation to final adjustment

Rehanging the refrigerator door is a task faced by many equipment owners. The reasons may be different: inconvenient opening due to the layout of the kitchen, changing the opening side when moving, or even a banal desire to update the interior. Despite the apparent complexity, re-hanging the door even a beginner can do it if you approach the matter with the right instructions and the necessary tools.

In this article we will analyze the process from A to Z: from preparing the workplace to the final adjustment of the hinges. You will learn which refrigerator models (for example, Indesit, Samsung, Atlant or Liebherr) have their own characteristics, how to avoid common mistakes and what to do if the door does not close well after rehanging. And also - detailed mounting diagrams for popular brands that are rarely found in the public domain.

Important: if your refrigerator is under warranty, rehanging the door may invalidate it. Check this point with the manufacturer's service center before starting work.

When do you need to re-hang the refrigerator door?

Re-hanging the door is not always the whim of the owner. There are objective reasons why you should think about changing the opening side:

• 🔄 Kitchen redevelopment: furniture or appliances are now positioned so that the door rests against a wall or cabinet.
• 🚪 Inconvenience of use: for example, if the refrigerator is in the corner and the door opens in the “wrong” direction.
• 🔧 Breakage of hinges: if one of them is broken, sometimes it is easier to move the door to the other side than to look for spare parts.
• 🏠 Moving: a new location may require a different arrangement of equipment.
• 👶 Safety: if a child has appeared in the house, and the door now opens towards the children's area.

Interesting fact: in some models Side-by-Side (for example, Samsung RS62R5001M9 or LG GC-B247JLVN) doors may require complete disassembly of the facade. This is due to the design features of two-chamber refrigerators. If you have just such a model, assess your strengths in advance.

⚠️ Attention: refrigerators with electronic display on the door (for example, Bosch KAN92VI30R or Siemens iQ700) will require reconfiguration of the wiring when re-hanging. Without experience, it is better to entrust this to a specialist.

Tools and materials: what you will need for the work

Before you begin, prepare everything you need. The absence of even one tool can slow down the process. Here is the complete list:

• 🔧 Screwdrivers: Phillips (usually PH2) and flat (for prying up decorative plugs).
• 🔨 Wrench or head on 10 mm (for some models Atlant or Stinol).
• 📏 Ruler or tape measure - for marking new holes.
• ✏️ Pencil or marker - to mark places drilling.
• 🔩 Drill with drills for metal (diameter depends on the fastenings of your model).
• 🧲 Magnet - so as not to lose small parts (screws, washers).
• 🧴 Grease for hinges (for example, WD-40 or silicone grease).
• 🧻 Soft fabric —to avoid scratching the body during operation.

For some models (for example, Liebherr CNef 4815), you may need hex key on 5 mm. Check this in the instructions for your refrigerator.

If the refrigerator came with plugs for the holes (usually plastic), find them in advance. If not, you will have to buy more or mask the old holes in other ways.

Preparing the refrigerator for re-hanging the door

Before removing the door, the refrigerator must be properly prepared. This will protect you from unpleasant surprises and damage to the equipment.

Unplug the refrigerator and let it defrost (if it is not No Frost)

Remove all the food. and shelves from the door

Secure the door with tape or rope so that it does not fall when disconnected

Place a soft blanket or cardboard under the refrigerator in case parts fall

Take a photo of the current location of the hinges and wiring (if any)

-->

If your refrigerator has a system No Frost, it is not necessary to defrost it. Simply unplug it. But for models with a drip system (for example, Biryusa 145 or Nord 242) defrosting is required - otherwise, when the equipment is tilted, the drainage system may be damaged.

Pay special attention door shelves. They must be removed in advance, as they can interfere with dismantling. In some models (for example, Samsung RB30J3000WW), the shelves are secured with latches - carefully pry them off with a flat screwdriver.

⚠️ Attention: if your refrigerator has a ice maker (for example, LG GR-B227SLQZ), before re-hanging, be sure to disconnect the water hose and drain the water from the system, otherwise you risk flooding the floor!

Step-by-step instructions: how to remove and rehang the door

The algorithm of actions may differ slightly depending on the model, but the general scheme is the same for most refrigerators. Let's consider the process using the example of a classic single-chamber model (for example, Atlant MXM 1705-100).

Step 1: Removing the old door

1. Remove decorative plugs from the top and bottom hinges. They are usually held on by latches - pry them off with a flat screwdriver.

2. Unscrew fastening screws the hinges (usually 2-3 pieces for each). In some models (for example, Indesit BIAA 13) the screws may be hidden under plastic covers.

3. remove the door from the hinges. It is better to do this with an assistant - the door can be heavy (especially on models with double glass).

4. Disconnect wiring (if any). Refrigerators with a display on the door usually have a connector in the bottom hinge.

Step 2: Preparing holes for the new side

1. Remove plugs from the opposite side of the refrigerator (where the door will now be).

2. If there are no holes, mark them using template (usually included with the refrigerator). If there is no template, use the old holes as a sample.

3. Drill new holes. diameter 8-10 mm. Hole depth - no more than 15-20 mm.

4. Insert into new holes plastic dowels (if provided). design).

Step 3: Installing the door on the new side

1. Transfer loops to the opposite side and secure them with screws.

2. Hang the door on the top hinge, then carefully align it with the bottom.

3. Tighten the screws, but not all the way - you need to adjust the position first.

4. Connect the wiring (if any). Make sure that the connector is seated tightly.

Step 4: Adjustment and check

1. Check if the door hangs straight. If there is a skew, loosen the screws and adjust the position.

2. Make sure the door fits tightly to the body. You can check this with a sheet of paper: place it between the door and the seal - if the sheet is difficult to pull out, the tightness is normal.

3. Close the door and check if it opens spontaneously.

4. Replace the decorative plugs.

If the door is after rehanging does not close well, you may need to adjust the hinges or replace the seal. Read about this in the next section.

What to do if the door creaks after rehanging?

The creaking usually occurs due to insufficient lubrication of the hinges or improper adjustment. Try the following steps:

1. Lubricate the hinges with silicone grease (do not use oils - they can damage the plastic!).

2. Check to see if the door is touching the body. If yes, loosen the screws and adjust the position.

3. Make sure that the seal is not twisted and does not interfere with closing.

Features of weighting for different models of refrigerators

Not all refrigerators are weighted the same way. Some brands have their own nuances. Let's consider the most common cases.

Brand/Model	Weighing features	Tools
Atlant, Stinol	The hinges are bolted, often requiring a wrench 10 mm. In some models, you need to move the door opening sensor.	Screwdriver, wrench, drill
Samsung (series RB, RT)	In models with a display, you need to carefully move the wiring. Hinges often have an asymmetrical design.	Screwdriver, hexagon, pliers
Indesit, Ariston	Hinge plugs may be snap-on. Some models require moving the water supply mount (if there is an ice maker).	Screwdriver, magnet for screws, drill
Liebherr, Bosch	Hinges with eccentric screws for adjustment. Accurate marking of new holes is required.	Screwdriver, hexagon, ruler
Side-by-Side (two-door)	Rehanging requires complete disassembly of the facade.	Screwdriver set, drill, assistant

For refrigerators Liebherr and Siemens premium series (for example, Liebherr SBSes 7266) may be required a special key for adjusting the hingesIt can be ordered from the official. dealer or use a similar size.

⚠️ Attention: in refrigerators Haier and Hisense the latest generations (2023–2026) are used system quick fastening of hinges. Attempt to disassemble them without the original tool may damage the mechanism. Check the manual for the exact tool number.

Common mistakes and how to avoid them

Even with the apparent simplicity of the process, many make mistakes that then have to be corrected. Here are the most common of them:

• 🔧 Improper hole markings: if you drill “by eye”, hinges. may not match, and the door will hang crooked. Always use the template or old holes as a reference.
• 🔩 Tightening. screws: this can lead to deformation of the hinges or even cracks in the plastic case. Tighten the screws with moderate force.
• 🔌 Damage to the wiring: in models with a display on the door, they often forget to disconnect the wires before dismantling. This can lead to broken contacts.
• 🚪 Ignoring adjustment: even if the door hangs level, it needs to be adjusted vertically and horizontally for a tight fit. fit.
• 🧊 Work without defrosting: in models with a drip system, this can lead to damage to the drainage.

One of the most insidious mistakes is wrong position of the sealIf. twist or move it, the door will not close tightly, which will lead to increased energy consumption and freezing of the chamber. After rehanging, always check the seal around the entire perimeter.

Another point: if you rehang the door on the refrigerator with with the No Frost system, after completing the work, let the equipment stand 2-3 hours before turning it on. This is necessary to stabilize the pressure in the system.

What to do if the door does not close after rehanging?

If after all the manipulations the door does not fit well, do not panic. In 90% of cases, the problem can be solved without calling a technician. Here is the algorithm of actions:

1. Check the seal: it should be clean, without creases. and fit evenly around the entire perimeter. If the seal is deformed, it needs to be replaced.
2. Adjust the hinges:
   • If the door sags at the bottom - tighten the bottom hinge.
   • If the door piled to the side - loosen the screws and level it.
   • If the door does not press on top - adjust the top loop.

Check the magnetic tape (if any): it must be intact and correctly positioned.

Make sure the refrigerator is level: even a slight tilt may interfere with closure.

If none of the methods helped, the problem may be a deformed body or broken hingesIn this case, it is better to contact a service center.

For refrigerators with electronic control (for example, Samsung Family Hub) after rehanging, you may need to reset settingsTo do this, unplug the refrigerator at 5-10 minutes, then. turn it on again.

FAQ: answers to frequently asked questions

Is it possible to hang the door on a refrigerator with a display yourself?

Yes, but you need to be extremely careful with the wiring in models Samsung i LG with a display on the door there is usually a special connector in the bottom hinge. Disconnect it before removing the door, and after rehanging, connect it back. If you are not confident in your abilities, it is better to call a specialist.

How much does it cost to re-hang a door at a service center?

The cost depends on the model and region. 2026 prices are as follows:

• Simple models (Atlant, Indesit) - from 1500 to 2500 rubles.
• Middle class (Samsung, Bosch) - from 2500 to 4000 rubles.
• Premium and Side-by-Side - from 4000 to 7000 rubles.

If replacement of the seal or hinges is required, the price will be above.

What to do if, after rehanging, the refrigerator began to work loudly?

This may be due to two reasons:

1. Compressor offset: when tilting the refrigerator, it could move. Let the equipment stand. 12-24 hours —the vibration should go away.
2. Poor door seal: if the seal is leaky, the compressor works harder. Adjust the door or replace the seal.

If the noise does not go away, check the fastening of the compressor and shock absorbers.

Is it possible to hang the door on a two-chamber refrigerator?

Yes, but the process is more complicated than in single-chamber models (for example, Atlant MHM 2835-90 or Samsung RL62EBSL) you will have to rehang both doors - both the freezer and refrigerator compartments. In addition, it may be necessary to relocate the fastenings for the inter-chamber partition. If you have little experience, it is better to entrust this to a specialist.

How to mask old holes from loops?

There are several ways:

• Use plastic plugs from the kit (if any).
• Seal the holes decorative stickers match the color of the refrigerator.
• Fill the holes epoxy resin and sand.
• Install on this place magnetic hooks for towels or oven mitts.

Do not use sealant - it can damage the enamel of the refrigerator.