Changing the direction of opening the refrigerator door is not just a whim, but often a necessary measure for the ergonomic arrangement of the kitchen. Owners of the model Biryusa 151 often face the fact that the standard arrangement of the handle or hinges interferes with comfortable access to products, especially in conditions of narrow space or non-standard headset layout. Fortunately, the design of this two-chamber unit provides the possibility of rehanging wings, which allows you to adapt the equipment to the individual requirements of the user.
The process of rehanging requires care, accuracy and a minimum set of tools. Incorrect actions can lead to damage fastenings, leakage or even deformation of the housing, so it is important to strictly follow the sequence of operations. In this article we will analyze in detail each stage of the work, from preparing the workplace to the final adjustments position of the sash.
It is worth noting that the model Biryusa 151 has its own design features, distinguishing it from more modern analogues with electronic control or the No Frost system. It uses classic mechanical hinges and magnetic seals, which greatly simplifies the task for the home craftsman. The main thing is to take your time and prepare everything you need in advance so as not to be distracted during the work process.
Necessary tools and preparation of the workplace
Before you begin to dismantle the heavy elements of the case, you need to provide yourself with a safe and comfortable space to work. The refrigerator should be completely defrost unplugged from the power supply, removing all shelves, drawers and food. This will not only make the design easier, but will also prevent objects from falling when the unit is tilted.
To perform the work, you will need a standard home handyman's kit. The main tool will be wrench or a set of heads, since the bolts on the hinges are often tightened with force. You will also need different types of screwdrivers for removing handles and decorative plugs.
- 🔧 10 mm wrench (preferably ratcheting for convenience).
- 🪛 Phillips and flat-head screwdrivers for dismantling fittings.
- 🧤 Work gloves to protect hands from sharp metal edges.
- 📏 Level or ruler to check the symmetry of the installation.
Pay special attention to lighting. As you work, you will have to look inside the hinge groups and look for hidden mounting holes. Poor lighting can cause you to miss an important retainer or incorrectly determine the type of bolt thread.
Dismantling the upper door and removing the hinges
You should always start the process from the upper chamber refrigerator Turk 151. This is due to the fact that the lower door often serves as a support or has structural elements that are more convenient to dismantle after removing the upper unit. The first step is to remove the top decorative panel if it blocks access to the top hinge group.
Carefully unscrew the bolts holding the top hinge. Please note that some modifications of the model 151 may require preliminary removal of the handle to gain access to the fasteners. Use the appropriate socket screwdriver to avoid tearing off the slots on the screws.
⚠️ Attention! Before completely unscrewing the top hinge, be sure to have an assistant hold the door. It may slip unexpectedly and damage the floor or suffer mechanical damage itself.
After removing the mounting bolts, carefully lift the door up, removing it from the bottom hinge pin. Place the sash in a safe place, placing a soft cloth or cardboard under it to avoid scratching the front surface. Now you have free access to the upper part of the case for further manipulations.
☑️ Removing the top door
Removing and preparing the bottom door
The bottom door of the refrigerator Turk 151 usually heavier than the top due to the design of the freezer and located inside the boxes. The process of removing it is similar, but requires more physical strength. First, remove the lower decorative trim, if present, and unscrew the fasteners of the lower hinge.
It is important to correctly assess the condition seal at this stage. If the rubber has not been changed for a long time and has become stiff, it may break when the door is removed. Act smoothly, without jerking, controlling the angle of the sash when lifting.
After removing both doors, it is necessary to prepare holes on the opposite side of the body. In the factory version they are closed with plastic plugs. Carefully remove them using a flat-head screwdriver and move them to the vacant spaces on the working side to maintain the aesthetic appearance of the unit.
Rearranging handles and fittings
The key point in adapting the refrigerator Biryusa 151 to a new method of opening is moving the handles. Depending on the model year, the handles may be screw-mounted at the front or have a hidden fastening. In most cases, you just need to rearrange the elements to the opposite side.
To do this, unscrew the fastening screws on the current side and carefully remove the handles. Then attach them to the prepared holes on the other side and secure. Make sure that the screws are tightened tightly, but without excessive force, so as not to split the plastic or metal.
| Element | Action | Tool | Nuance |
|---|---|---|---|
| Upper handle | Removal and transfer | Phillips screwdriver | Check the length of the screws |
| Lower handle | Removal and transfer | Phillips screwdriver | Align holes |
| Plugs | Rearrangement | Flat screwdriver | Do not damage edge |
| Hinges | Removal and rearrangement | Wrench | Keep an eye on the pins |
If on your model Biryusa the handles are asymmetrical and do not allow for transfer (found on very old modifications); it may be necessary to replace the fittings with universal ones. In this case, it is recommended to contact a service center or a specialized spare parts store.
Installation of hinges on the new side
Installation of hinges on the new side of the case is a critical step on which the tightness and service life of the closing mechanism depend. Insert the hinge pins into the prepared holes and tighten the mounting bolts. Do not tighten them all the way right away - this will allow you to adjust the position of the door in the future.
Install the bottom hinge first, since it is the basic support for the entire structure. Make sure it fits snugly to the body and has no play. Then install the upper loop group, keeping it vertical.
⚠️ Attention! When installing the hinges, make sure that no foreign objects get between the metal part of the hinge and the body of the refrigerator. This can lead to a loose fit of the door. seal or foreign objects. This may cause the door to not seal properly.
The model Biryusa 151 is characterized by the use of standard metric bolts. When assembling, make sure that you use exactly those fasteners that are intended for hinges, and not for other units, as they may differ in length and thread pitch.
Installation of doors and final adjustment
Now you can start hanging the doors. First install the bottom flap by sliding it onto the bottom hinge pin. Then, holding the door, install the top hinge and secure it to the body. After this, hang the top door, aligning the holes with the top hinge.
The most important step is adjustment. The doors should close tightly, without gaps, but not too tightly. If you notice any misalignment, loosen the hinge mounting bolts, level the sash and tighten them again. Check the operation of the magnetic lock: the door should be magnetized at a small opening angle.
- 🚪 Check the tight fit around the entire perimeter.
- 📐 Make sure the doors are horizontal relative to each other.
- 🔩 Tighten all the bolts completely after checking.
- 🧊 Turn on the refrigerator and check the operation after 2-3 hours.
After completing the work, turn on the refrigerator and let it reach temperature. During the first hours of operation, listen to the sounds: the absence of creaks and knocks indicates the correct installation of the hinges and the absence of mechanical friction.
What to do if the door does not close tightly after re-hanging?
If after installation you notice gaps, first of all check whether it is installed correctly seal. Sometimes when removing a door, the rubber may become dislodged or pop out of its groove. An uneven floor may also be the cause - in this case, tighten the adjusting supports at the bottom of the refrigerator. If the problem is that the hinges are misaligned, repeat the adjustment procedure by loosening the bolts.
Is it necessary to change the seal when rehanging?
The rehanging process itself does not necessarily require replacement of the seal if it is in good condition. However, if the rubber is old, cracked or has lost its elasticity, this is the ideal time to replace it, since the doors are removed anyway. The new seal will provide better tightness and energy efficiency.
Is it possible to perform this operation alone?
Technically, one person can cope with re-hung the refrigerator doors Biryusa 151, but this extremely inconvenient and risky. The doors are heavy and bulky, making them easy to drop or scratch the frame. Having an assistant who will hold the doors while unscrewing and screwing the hinges will significantly speed up the process and protect the equipment.