Buying a new refrigerator is always a joyful event, marking the renewal of household appliances in the kitchen. However, after delivery of a large cargo, a logical question arises about how to properly connect the Indesit refrigerator so that it operates silently and efficiently for many years. Errors at the initial start-up stage can lead to serious damage to the compressor or a violation of the temperature regime, so it is important to act consistently and carefully.
Modern models Indesit have complex electronics and specific requirements for operating conditions. Simply plugging the plug into the socket is often not enough for the unit to operate correctly. You will need to perform a number of preparatory steps, from choosing the right location to stabilizing the refrigerant after transportation. Ignoring these rules may cause warranty denial.
In this article, we will analyze in detail each stage of installation so that you can independently and safely start your new refrigerator. We will look at the nuances of preparing the room, the features of body alignment and the subtleties of the first turn-on, which are often overlooked by inexperienced users.
Selecting a location and preparing the space
The first thing a competent installation begins with is choosing the optimal location for placing the equipment. The refrigerator Indesit should not stand close to the wall or heating devices. For normal air circulation necessary to cool the condenser, it is necessary to leave gaps on all sides, especially at the back and sides. The minimum distance to the rear wall should be at least 5-7 centimeters.
It is important to consider that the floor at the installation site must be level and durable. If the flooring has unevenness, the body will warp, which will lead to a loose fit of the doors and increased load on the hinges. Compressor vibration on an uneven surface it will be transmitted to furniture and walls, creating unpleasant noise during operation.
⚠️ Attention: It is strictly forbidden to install the refrigerator in close proximity to a gas stove, oven or heating radiators. Thermal radiation will cause the compressor to work with overload, which will sharply reduce its service life.
It is also worth paying attention to the lighting. Direct sunlight should not fall on the body, as this causes fading of the plastic and additional heating of the internal chamber. If it is impossible to avoid the sun, use thick curtains or blinds during the daytime.
Transportation and settling period
After delivering the refrigerator to the apartment, a critical question arises: when can you turn it on? If transportation was carried out in a vertical position, then it is enough to wait 2-3 hours before the first start. This time is necessary for the oil that has entered the refrigerant circulation circuit to flow back into the compressor crankcase.
The situation becomes more complicated if the unit was transported lying down. In this case settling period it should be much longer - at least 8, and preferably 12-24 hours. The oil in the compressor Indesit has a certain viscosity, and it takes time to take its normal place. Turning on the device immediately after horizontal transportation can lead to water hammer and failure of the compressor.
What will happen if you turn on the refrigerator immediately?
If you start the compressor before the oil drains, the capillary tube may become clogged with an oil plug. This will lead to a sharp increase in pressure, overheating and eventual breakdown of the motor. Repair in this case will be expensive and difficult.
During settling, it is recommended to remove packaging materials, including cardboard, polystyrene foam and tape. Pay special attention to the internal struts, which often secure shelves and drawers during transport. They must be removed so as not to damage the internal plastic lining when opening the doors for the first time.
Aligning the case level
High-quality connection of the Indesit refrigerator is impossible without correct adjustment of the position of the case. Even a visually flat floor can have micro-slopes that will lead to misalignment. For adjustment, the front support legs are used, which can be twisted or unscrewed.
The ideal position is when the refrigerator stands steadily, without swaying, and the doors close on their own when they deviate from the axis by 10-15 degrees. This is ensured by slightly tilting the body backwards. If the door does not close on its own, you need to tighten the front legs, lifting the front part of the unit.
Use a building level to check the horizontalness of the top cover of the refrigerator. Adjusting the legs This is done using a wrench or manually, depending on the model. Indesit. Do not leave the refrigerator hanging only on the front supports - it should also rest on the rear wheels or legs to distribute the weight evenly.
☑️ Checking the installation
Preparing the internal chambers for startup
Before connecting the refrigerator to the power supply, it is necessary to thoroughly clean the inside of the chambers. New plastic surfaces may have a specific technical smell, which is better to get rid of in advance. Wipe all shelves, drawers and walls with a soft cloth soaked in a weak soda solution.
Do not use abrasive cleaners or aggressive chemicals, as they can damage the coating of the internal plastic Indesit. After wet cleaning, be sure to wipe the surfaces dry. Moisture inside the chambers when first turned on may freeze, forming unwanted ice on the evaporator.
Make sure that all removable elements - shelves, containers for vegetables, bottle holders - are installed in their original places according to the instructions. An improperly installed shelf can block cold air circulation, causing food to cool unevenly.
Electrical connection and network requirements
Modern refrigerators Indesit are sensitive to voltage drops in the network. For safe operation, it is recommended to use a separate grounded outlet. The use of various extension cords, tees and low-quality surge protectors is unacceptable, as they can cause contact heating and fire.
Check the condition of the power cord: there should be no creases, abrasions or damage to the insulation. The plug should fit snugly into the socket without loosening or sparking. If you feel a burning smell or heating of the plug during operation, immediately stop use and call an electrician.
| Parameter | Standard value | Tolerable deviation |
|---|---|---|
| Main voltage | 220-230 V | ± 10% |
| Current frequency | 50 Hz | ± 1 Hz |
| Grounding | Required | No |
| Separate line | Recommended | Advisable |
If your region experiences frequent power surges, we strongly recommend purchasing voltage stabilizer Electronics protection refrigerator against current surges will extend the life of the control board and compressor. Saving on this component may cost more than repairing a burned-out module.
First start-up and temperature adjustment
After all the preparatory steps have been completed, you can turn on the device to the network. When starting for the first time, do not download products immediately. Let the refrigerator Indesit run idle for 2-4 hours. This will allow the unit to reach the required temperature and stabilize work processes.
In models with electronic control, set the settings recommended by the manufacturer. Typically, the optimal temperature for the refrigerator compartment is +4°C, and for the freezer -18°C. Mechanical thermostats often have a scale from 1 to 5 or 7; in this case, set the regulator to the middle position.
⚠️ Attention: Do not open the doors frequently during the first hours of operation. Every time you open the door, you let out cold air and let in warm air, causing the compressor to work longer and harder.
Listen to the operation of the compressor: it should turn on, run for a while and turn off. If the motor hums continuously without stopping for more than 5-6 hours, or, conversely, does not turn on at all, this may indicate a malfunction or a freon leak.
Frequently asked questions (FAQ)
Is it possible to immediately put food in a new refrigerator?
No, this is not recommended. The internal volume must cool to operating temperatures, which takes from 2 to 4 hours. If you load food at once, the compressor will work with overload, trying to cool warm objects, which can lead to spoilage of food and wear out of equipment.
Why does the Indesit refrigerator make a lot of noise after installation?
The noise can be caused by several reasons: incorrect installation (misalignment), the body touching furniture or walls, fan operation (in No Frost models). Check the clearances and adjustment of the legs. If the hum is strong and metallic, diagnostics of the compressor may be required.
Is it necessary to defrost the refrigerator before turning it on for the first time?
There is no need to defrost a new refrigerator, since there is no ice in the chambers. However, wet cleaning with a disinfectant (for example, a weak soda solution) and thoroughly drying is a mandatory procedure to remove factory dust and odors.
What to do if the door does not fit tightly?
Check whether anything is interfering with the seal (packaging, label). Make sure the refrigerator is level and tilts slightly backwards. If the seal is deformed during transportation, you can carefully warm it up with a hairdryer and straighten it, but in a warranty case it is better to contact service.