Refrigerators Liebherr are deservedly considered the standard of reliability and ergonomics, however, their internal structure often requires a careful approach during initial assembly. Many owners encounter difficulties already at the stage of installing internal equipment, since the fastening system SmartSteel or classic guides have their own technological features. Incorrect installation can lead to the shelf not fitting into the grooves, wobbling, or, worst of all, breaking due to careless handling.
In this article we will analyze in detail the process of installing glass and lattice shelves for various series of refrigeration equipment of the German brand. You will learn about the nuances of fixing limiters, installation features in zones BioFresh and the rules for safe handling of tempered glass. Properly installed internal space is the key to long service life of the equipment and ease of daily use.
It is worth noting that the design of cameras can vary significantly depending on the model and year of manufacture. If you are rearranging the shelves after general cleaning or changing the storage configuration, it is important to follow the sequence of actions described below to avoid damage guide profiles.
Preparation for installation and types of Liebherr shelves
Before proceeding with installation, you must clear the working space inside the refrigerator compartment. Make sure that all foreign objects, packaging and protective films are removed. Inspect the side walls of the chamber: special profiles or holes for hooks should be installed on them. Modern models Liebherr often use a system VarioSpacethat allows you to quickly change the height of shelves without removing adjacent elements.
It is important to distinguish between types of shelves, since the method of their installation may differ. Standard glass shelves have a plastic edging around the perimeter, which serves as a limiter and handle. Lattice shelves for vegetables or bottles are equipped with special hooks or guide slides. Some models are equipped with retractable shelves Comfortthat require preliminary installation of telescopic guides.
⚠️ Attention: Before installation, allow the glass shelves to warm up to room temperature if they were in the cold. A sharp change in temperature can lead to the formation of microcracks in tempered glass.
Check the contents. The kit should contain the shelves themselves, stops (if they are removable), drawer guides and, if necessary, decorative plugs. The absence of even one small plastic element may make it impossible to properly fix the entire structure.
Installation of standard glass shelves
Installation of the main glass shelf is the most common operation. In refrigerators Liebherr this process usually does not require tools, but does require some skill. First, determine the desired installation height based on the dimensions of the products you plan to store. The fastening system allows you to easily move the shelves vertically.
Grip the shelf with both hands by the sides, closer to the front edge. Insert it horizontally into the chamber, tilting the front slightly upward so that the back edge extends further than the front. This is necessary so as not to catch door seal or internal lighting elements. Smoothly lower the shelf onto the guide profiles on the sides.
- 🔹 Make sure that the shelf lies evenly along the entire depth of the profile, and not just on the front edge.
- 🔹 Check the stability: the shelf should not wobble when lightly pressed.
- 🔹 Make sure that the back of the shelf does not block the holes for cold air circulation.
If your model uses hook holders, first insert them into the corresponding holes on the side wall until you hear a characteristic click. Only after all four holders are securely fixed can the glass be installed. In some series PowerCooling the shelves have special cutouts for containers, which must coincide with the drawer guides.
☑️ Checking the installation of the glass shelf
Installation features in the BioFresh zone
Freshness zone BioFresh in refrigerators Liebherr has a unique design, often including a glass separator panel. This shelf separates the high humidity zone from the main volume of the refrigerator. Installation of this part is critical to proper climate control inside the chamber.
The glass lid of BioFresh boxes is usually mounted on special slides or support ledges. Unlike conventional shelves, a tight fit is important here (where provided by the design) to maintain optimal humidity. When installing, be extremely careful with plastic latches; they are quite fragile in the cold.
Users are often faced with the issue of installing telescopic guides for BioFresh drawers. They are mounted on the side walls of the chamber. It is important to install the left and right guides at the same height, otherwise the drawer will warp and it may move out spontaneously or jam.
⚠️ Attention: Do not install the BioFresh glass panel if the drawers inside are filled with food. Installation should be done on empty guides to avoid warping and contents falling out.
What to do if the BioFresh shelf does not fit into place?
Check whether the food in the bottom drawer is in the way. Sometimes it is enough to pull out the drawer a little or reduce the amount of food so that the top glass panel sits completely in the grooves.
Installing wire shelves and bottle holders
Grid shelves in Liebherr are often used to store bottles or products in metal containers, providing better air circulation around them. Such shelves are equipped with powerful hooks that are inserted into the perforations on the side walls. The main rule here is symmetry.
To install, first secure the rear hooks, then the front ones. Make sure they snap into place. The grate should lie tightly, without play. If you are installing a bottle holder (wine rack), make sure it is designed to support the weight of a full bottle and has additional support points.
Some models have pull-out grid shelves. Their installation is more complicated: first, long guides are installed throughout the entire depth of the chamber, then the grill itself is hung on them. The SoftSystem mechanism requires lubrication or checking the cleanliness of the rollers before installation.
- 🍷 Install bottle holders only on a horizontal surface, checking the level.
- 🍷 Lattice shelves must not be overloaded with heavy objects, as the cell pitch large.
- 🍷 Make sure that the grille hooks do not scratch the coating of the side walls when inserting.
If you notice that the grille sag under weight, immediately redistribute the load. Metal rods have a tensile strength, and their deformation is irreversible.
Height adjustment and VarioSpace system
One of the key features of refrigerators Liebherr is the ability to quickly rearrange shelves. The system VarioSpace allows you to remove the shelf along with the box or container underneath it, freeing up space for tall items such as pots or water bottles.
To change the height, you do not need to remove the shelf completely. It is enough to lift its front edge and pull it towards you, then move it to another level. The guide profiles are made of durable plastic or steel and are designed to withstand thousands of adjustment cycles. However, avoid hitting the profile with metal objects so as not to disturb its geometry.
When adjusting the height in areas with electronics (for example, above the display or sensors), observe the minimum distances specified in the instructions. Covering temperature sensors with a shelf may result in incorrect operation Cooling systems.
| Shelf type | Maximum load | Fixing material | Installation feature |
|---|---|---|---|
| Glass standard | up to 25 kg | Plastic profile | Angle insert |
| Lattice | up to 15 kg | Metal hooks | Fixation until it clicks |
| BioFresh shelf | up to 10 kg | Sleds/Stops | Requires precise positioning |
| Extendable (telescope) | up to 20 kg | Guides | Unassembled installation |
Typical errors and troubleshooting
Even with careful study of the instructions, users often make mistakes. The most common of them is an attempt to push the shelf by force. If the element SmartSteel or the glass does not fit into the grooves freely, it means that you have violated the angle of inclination or chosen the wrong level. The use of force is guaranteed to lead to chipping or breaking of the plastic fasteners.
Another common problem is installing the shelf upside down. The limiting edges must always face upwards. If you turn the shelf upside down, food may roll deeper into the refrigerator and condensation will not drain properly, potentially causing ice to form on the back wall.
⚠️ Attention: Never use the shelf if you notice even the slightest chip on the glass. Vibration of the compressor can lead to sudden destruction of the glass over the entire area.
If the shelf is installed but is wobbly, check the integrity of the side profiles. One of the hooks may be broken or deformed. In this case, operating the refrigerator with such a shelf is unsafe. Order original spare parts Liebherr to replace damaged elements.
It is also worth mentioning the cleanliness of the guides. Grease and sticky food residue can prevent the shelf from sealing tightly. Regularly wipe the profiles with a damp cloth before installing the glass elements.
Why does the shelf fall out when the door is opened?
This can happen if the refrigerator is not level (tilted forward) or if the front limiting edge of the shelf is damaged/missing. Check the adjustment of the refrigerator legs.
FAQ: Frequently asked questions
Can Liebherr shelves be washed in the dishwasher?
Glass shelves with plastic edging not recommended dishwasher safe machine at high temperatures (above 45-50°C), as the plastic may become deformed and the shelf will no longer stay in the grooves. Lattice shelves can usually be washed in a gentle mode, but it is better to clarify this in the instructions for the specific model.
What to do if the shelf holder hook is broken?
Do not try to glue a broken plastic hook - the glue will not withstand the weight of the shelf and products. You must order an original set of holders for your refrigerator series. They are sold at authorized service centers.
How to remove a shelf to wash the refrigerator?
Empty the shelf of food. Take it with both hands, slightly lift the front edge (literally 1-2 cm) to disengage from the front stop, and smoothly pull it towards you. Then remove it from the chamber.
Will the shelves withstand a heavy pot of soup?
Yes, glass shelves Liebherr are designed for significant loads (usually up to 25 kg of evenly distributed weight). However, placing hot items is prohibited - let the pan cool to room temperature before placing it on the shelf.
Is it possible to remove the shelf completely to place a tall cake?
Yes, most shelves are removable. You can temporarily remove one or more shelves to place bulky items. After use, return the shelf to its place for proper air circulation.