Installing shelves in a POZIS refrigerator: instructions with photos, diagrams and secrets of the masters

Refrigerators POZIS are known for their reliability and thoughtful ergonomics, but even in the most modern models (for example, POZIS RK-149W or POZIS RK-103) owners are faced with the need to rearrange or replace shelves. This may be due to the purchase of oversized products, reorganization of space, or simple wear and tear of plastic guides. Unlike brands like Samsung or LG, where shelves are often fixed on standard grooves, in POZIS unique fastenings are used - and this raises questions among users.

In this article you will find step-by-step instructions for different types of shelves (glass, plastic, with metal edging), you will understand the fastening diagrams for refrigerators and freezers, and also learn how to avoid typical mistakes - from misalignment to breakage of guides. We took into account the features of models POZIS of the last 7 years, including series EcoFresh i NoFrost, where the design of the shelves may differ. If your refrigerator is older than 2018, check the compatibility of the fastenings - sometimes the manufacturer changed the standard even within the same line.

Before you get started, make sure you have all the necessary tools. In 90% of cases, a flat screwdriver and a soft cloth will suffice, but for some models (for example, POZIS RK-160 with a system MultiAirFlow) you may need a 4 mm hexagon. Do not ignore this stage - using unsuitable tools leads to chips on glass shelves or deformation of plastic grooves.

1. Types of shelves in POZIS refrigerators: how to determine your model

Before removing or installing shelves, you need to understand what type of structure you are dealing with. Refrigerators POZIS use three main types of shelves:

• 🔹 Glass shelves with metal edging —the most common option in models POZIS RK-103, RK-142 and RK-149. They can withstand loads of up to 25 kg, but require careful handling during installation.
• 🔹 Plastic shelves with a ribbed surface - found in budget series (for example, POZIS RK-60). Lighter in weight, but deformed when loaded over 10–12 kg.
• 🔹 Combined shelves (glass + plastic inserts) —used in models with a freshness zone FreshZone, for example, POZIS RK-160. It is important here not to confuse the installation side - the plastic part should be on top.

To accurately identify the type of shelf, look at its end part:

• 🔍 If visible metal profile with grooves it is glass shelf with edging. It is attached to guides with latches.
• 🔍 If the edge of the shelf transparent or matte plastic is a lightweight version. It is fixed on plastic protrusions.
• 🔍 If there is one on the glass recesses for plastic inserts - this is a combined shelf. Inserts are usually marked with arrows for correct orientation.

In models POZIS with a system NoFrost (for example, POZIS RKNF-120) shelves may have additional vent holes —they cannot be covered with food, otherwise air circulation will be disrupted. Also pay attention to color marks on the back wall of the refrigerator: in some series they indicate the maximum load for each shelf (green - up to 15 kg, red - up to 25 kg).

2. Tools and preparation: what you will need for work

To install shelves in the refrigerator POZIS you don’t need professional tools, but there are several nuances that will simplify the process:

• 🔧 Flat screwdriver (tip width 5–7 mm) - for prying up plastic clips in models POZIS RK-149 and similar.
• 🔧 4 mm hexagon - required for shelves in refrigerators with a system MultiAirFlow (for example, POZIS RK-160).
• 🔧 Silicone pot holder or gloves —to avoid leaving fingerprints on glass shelves.
• 🔧 Level (bubble or laser) —will help avoid misalignment during installation.

Before you begin work be sure to unplug the refrigerator from the mains and remove all the products. If the shelf is cracked or deformed, prepare a replacement - spare parts stores for POZIS often sell universal glass shelves with adjustable fasteners (for example, art. POZ-456-S for models 2020–2026).

Disconnect the refrigerator from the outlet|Take out all food and containers|Check the integrity of the guides|Prepare tools (screwdriver, hexagon)|Clean the grooves from dirt and ice (if any)-->

Pay special attention cleaning grooves. In refrigerators POZIS with a drip defrosting system (POZIS RK-103, RK-142), ice or sticky residue from food often accumulates in the guides. Use plastic scraper (not metal!) and warm water with soda. If the grooves are deformed, they can be carefully aligned with a hairdryer. (temperature no higher than 60°C), but do not overheat - the plastic may melt.

⚠️ Attention: In refrigerators POZIS with system NoFrost (RKNF-120, RKNF-140) Shelf guides are often integrated into the cabinet. Do not try to dismantle them - this will lead to damage to the ventilation system.

3. Removing old shelves: step-by-step instructions

The process of removing shelves depends on their type and model of the refrigerator. Let's consider the two most common options:

3.1. Glass shelves with metal edging (POZIS RK-149, RK-103)

1. Pry front edge of the shelf with a flat screwdriver, slightly lifting it up.
2. Slide the shelf towards you until it stops - it will come out of the rear grooves.
3. Carefully lower the front edge and remove the shelf from the refrigerator.

If the shelf is “jammed”, do not apply force - check to see if ice or debris has gotten into the grooves. models POZIS with FreshZone the rear fastenings may have additional latches. To release them, press on plastic lever in the center of the guide (it is usually indicated by an arrow).

3.2. Plastic shelves (POZIS RK-60, RK-85)

1. Lift right or left corner of the shelf (depending on the model).
2. Move it left/right, freeing it from the clamps.
3. Pull out the shelf at an angle of 30–45°.

In budget models, plastic shelves are often mounted on flexible protrusionswhich lose over time elasticity. If the shelf falls out by itself, check the integrity of the latches - they can be replaced with a repair kit (art. POZ-112-P).

What to do if the shelf cannot be removed?

If the shelf is stuck, do not pull it by force - this may damage the guides. Try the following steps:

1. Heat the grooves with a hairdryer (temperature no higher than 50°C) - the plastic will become more elastic.

2. Lubricate the fasteners with silicone grease (do not use WD-40 - it leaves an odor!).

3. On models with NoFrost check that the shelf is not blocking the ventilation hole. Sometimes it is enough to slightly lift the rear edge to release the lock.

4. Installing new shelves: diagrams and secrets

When installing shelves in the refrigerator POZIS the main thing is to observe sequence i direction of fastenings. Below are diagrams for the most popular models:

For models with LED backlighting (POZIS RK-142 LED) when installing the top shelf, make sure that it does not touch the lamp. The optimal distance is 2–3 cm. If the shelf is installed crookedly, the backlight may flicker or overheat.

In refrigerators with MultiAirFlow (POZIS RK-160) shelves have additional side clamps. To secure them, you need:

1. Install the shelf into the grooves.
2. Turn the hexagon side screws 90° (clockwise).
3. Check the fixation by slightly pulling the shelf towards you.

5. Common mistakes and how to avoid them

Even with the apparent simplicity of installing shelves in POZIS users often make mistakes that lead to breakdowns or inconvenience of use. Here are the most common of them:

• ❌ Shelf skew - occurs if the grooves are not aligned with the guides. As a result, the shelf may crack under the weight of the products.
• ❌ Ignoring the maximum load - plastic shelves POZIS RK-60 are not intended for heavy pots.
• ❌ Incorrect orientation of the combined shelves - if plastic the insert is installed downwards, it will collect condensation.
• ❌ Closing the ventilation holes —in models with NoFrost this leads to freezing of the evaporator.

To avoid these problems, follow simple rules:

• ✅ Before installation, check shelf level -it must lie strictly horizontal.
• ✅ Distribute the load evenly - heavy products (cans, bottles) place closer to the back wall.
• ✅ In models with FreshZone use combined shelves only in the compartments intended for them.

⚠️ Attention: If after installation the shelf still wobbles, do not try to fix it with adhesive tape or sealant - this will interfere with air circulation and may lead to compressor failure. It is better to replace the guides with new ones (the cost of the set is from 300 rubles).

In refrigerators POZIS s electronic control (POZIS RK-149W Digital) after rearranging the shelves, the temperature sensor may go astray. If the display shows an error E2 or E4, reset the settings:

1. Press and hold the "Super Cool" button for 5 seconds.
2. Wait for the sound signal.
3. Re-adjust the temperature.

6. How to arrange shelves for maximum convenience

The correct arrangement of shelves in the refrigerator POZIS not only simplifies access to products, but also extends the life of the equipment. Here is the optimal scheme for most models:

• 🥦 Top shelf — light products: yoghurts, cheeses, packaged sausages. The temperature here is the most stable (+2...+4°C).
• 🥛 Middle shelf —milk, sauces, open containers. It is convenient to place products of medium weight (up to 10 kg).
• 🍗 Bottom shelf (above the drawers) —heavy products: meat, fish in containers, large jars. Maximum load - up to 25 kg.
• 🥬 Drawers for vegetables/fruits — regulate the humidity using special dampers (if any).
• ❄️ Door shelves — only light foods: eggs, butter, drinks in small bottles.

In models with NoFrost (POZIS RKNF-120), avoid placing products close to the back wall - this will block air circulation. The optimal distance is 3–5 cm. If your refrigerator has a zone FreshZone (usually marked in blue), use it for perishable foods (greens, berries, fresh meat). The temperature here is 1–2°C lower than on the main shelves.

For refrigerators POZIS s two compressors (POZIS RK-160 DualCoolyou can set different temperature zones. For example:

• Upper chamber: +2°C (for meat, fish).
• Lower chamber: +5°C (for dairy products, fruits).

7. Replacing broken shelves: where to buy and how to choose

If the shelf in your refrigerator POZIS is cracked or deformed, it can be replaced without contacting a service center. Here's what you need to know:

• 🛒 Original spare parts sold in company stores POZIS or on sites like 4holoda.ru, rembit.ru. The cost of a glass shelf is from 800 to 2500 rubles, depending on the model.
• 🔄 Universal shelves (for example, from Beko or Indesit) are suitable for budget models POZIS RK-60, RK-85, but may differ in size.
• 📏 Dimensions specify exactly: depth, width and type of fastening (grooves/latches/screws). For POZIS RK-149 the standard shelf size is 540×450 mm.

When purchasing, check:

• 🔍 Glass thickness —in models POZIS it varies from 5 to 8 mm.
• 🔍 Presence of metal edging —it prevents chipping.
• 🔍 Compatibility with the defrosting system —shelves for NoFrost have additional holes.

If you are not sure of the choice, take with you photo of the old shelf (back and front) or a fragment of it. Parts stores often have catalogs indicating compatibility. For example, a shelf from POZIS RK-103 is suitable for RK-142, but is not compatible with RKNF-120 due to different fastenings.

⚠️ Attention: When installing a new shelf, do not use force - if it is not falls into place, check if you have mixed up the model. In refrigerators POZIS with NoFrost the guides are often asymmetrical (the left and right sides are different).

Frequently asked questions (FAQ)

Can it be washed shelves in the dishwasher?

Glass shelves POZIS with metal edging can be washed in the dishwasher at temperatures up to 50°C. Plastic shelves and combined ones (with inserts) are washed only by hand - high temperatures deform the plastic. Use mild detergents without abrasives.

Why does the new shelf rattle when the refrigerator is running?

This happens because play in the fasteners. Check:

• Whether the shelf is installed correctly in the grooves (a click should be heard).
• Are the guides deformed (if so, replace them).
• Is the shelf touching the back wall or ventilation holes.

If the problem persists, place silicone gaskets under the corners of the shelf.

How to remove a shelf in a freezer POZIS RKNF-120?

In freezers with NoFrost shelves are attached differently than in a refrigerator compartment:

1. Lift the front edge of the shelf.
2. Slide it left until it stops (in some models - to the right).
3. Lower the front edge and pull out the shelf.

Do not use sharp objects - plastic becomes brittle in the freezer.

What to do if, after installing the shelf, the refrigerator becomes louder?

This may be due to:

• 🔊 Vibration of the shelf —check that it does not touch the compressor or tubes.
• 🔊 Blocking the fan (in models with NoFrost)—make sure that the shelf does not block the holes.
• 🔊 Disk —align the shelf.

If the noise does not disappear, check whether debris has entered the ventilation system.

Is it possible to install shelves from another brand in refrigerator POZIS?

Theoretically yes, but there are nuances:

• 🔄 Shelves from Indesit or Ardo suitable for budget models POZIS RK-60, RK-85.
• ❌ Shelves from Samsung or LG are not compatible - other fastenings and sizes.
• ⚠️ Before purchasing, check dimensions and type of fixation (grooves/latches).

It is best to select shelves according to article original spare parts (for example, POZ-456-S for POZIS RK-149).