Each owner of refrigeration equipment sooner or later is faced with the need to carry out general cleaning inside the chamber. Pozis refrigerators, which are well-deservedly popular due to their reliability, have their own design features, which are important to consider when servicing. Improper dismantling of internal elements can lead to damage to the glass or plastic guides, so before starting work you should carefully study the structure of your unit.
The process of removing glass surfaces and plastic containers does not require special tools, but requires accuracy and an understanding of the mechanics of fasteners. In this article, we will look in detail at how to safely free up internal space for washing or rearranging food. Following the correct sequence of actions will help avoid chips, cracks and broken latches, extending the life of your refrigerator.
Preparation for dismantling and safety precautions
Before starting the active phase of work, it is necessary to properly prepare the workspace and the unit itself. Safety in this context, it means not only the safety of the equipment, but also the protection of the user from cuts from broken glass or heavy objects falling on their feet. It is recommended to clear the adjacent area so that there is somewhere to put the removed elements.
The first step is always to completely clear the shelf of products. Even if it seems that the glass will support the weight of a couple of cans, the risk of shifting the center of gravity when tilted is too great. Heavy bottles and it is better to remove glass containers in advance so as not to create unnecessary stress on the fastening mechanisms at the time of removal.
It is also worth taking care of the availability of free space on the floor or table, covered soft towel or thick cardboard. This will allow you to safely place the dismantled parts if they need to be washed. Sharp movements When removing elements, it is unacceptable, since plastic becomes more fragile at low temperatures.
⚠️ Attention: Never try to remove the glass shelf until it has completely warmed up to room temperature after defrosting, if there was severe frost in the chamber before. A sharp change in temperature can cause the appearance of microcracks.
Design features of Pozis glass shelves
Internal space refrigerators Pozis most often equipped with shelves made of tempered glass, framed by a plastic frame or metal edging. Such surfaces are supported by special stops, which can be made in the form of separate plastic stops or integrated into the side walls of the chamber. Understanding the type of fastening is the key to successful dismantling.
Most modern models use shelves that are inserted into slots and secured with stops at the front. To remove such an element, you need to lift it slightly, overcoming the resistance of the latches, and pull it towards you. Tempered glass has high strength, but its edges are vulnerable to pinpoint impacts on hard surfaces.
Some models are equipped with sliding sections or shelves with a cutout for the freezer camera. The design of such elements is more complex: they may have additional guide slides. When working with them, it is important not to apply excessive force if movement is blocked. Sliding mechanism requires delicate handling and clearing of ice before attempting to remove.
- 🔹 Standard shelves are supported by four attachment points around the perimeter.
- 🔹 The front edge often has a plastic side-limiter that prevents it from falling out.
- 🔹 The back part can be free or fixed in special grooves in the wall.
- 🔹 Models with variable geometry have movable sections that require unlocking.
Algorithm for removing a standard glass shelf
The process of dismantling the main glass surface should be performed in strict sequence so as not to upset the balance and damage the fasteners. First, make sure the shelf is empty and dry. Grasp the front edge of the glass with both hands, covering it on both sides for a secure grip.
Next, you need to lift the front edge up 1-2 centimeters. At this point you may feel a slight resistance from the plastic clips - this is normal. The main thing is not to overdo it and not to pull up too hard, so as not to tear the fasteners out of the grooves in the wall of the refrigerator. Plastic stops elastic, but have a tensile strength.
After the front edge is raised and disengaged from the stops, smoothly pull the shelf towards yourself. The movement should be smooth, without jerking. If the shelf sits tightly, you can slightly rock it from side to side, freeing it from possible suction or ice. Remove the element you should completely control its weight.
☑️ Checklist for dismantling the shelf
⚠️ Attention: If the shelf does not give in, do not use metal objects (knives, screwdrivers) to pry up the edges. This is guaranteed to lead to chipped glass or scratches on the inner coating of the chamber.
Dismantling of plastic drawers and balconies on the door
Plastic elements, such as vegetable boxes and shelves on the door (balconies), are removed differently than glass surfaces. They are usually not rigidly fixed with screws and are held in place by guides and their own weight. However, the fragility of plastic at low temperatures requires special care.
Drawers for vegetables, located in the lower part of the refrigerator, are most often installed on telescopic guides or simply inserted into grooves. To remove such a box, you need to pull it out all the way, then lift the front part up and pull it towards you. Guide rails may have stoppers that need to be snapped off with your fingers.
Door shelves are removed by lifting the entire module up. The plastic pocket has a shape that covers the door stiffeners. With a sharp upward movement, you disengage the lower edge, after which the module is freely removed. Bottle balconies They are often removed in the same way, but may be more fragile in the fastening places.
In some models Pozis door shelves have additional fasteners on the sides. If the module cannot be removed by simply lifting it, inspect the sides for latches. They need to be carefully pressed or bent, holding the shelf with the second hand.
- 🧊 The drawers are removed by moving upwards and towards you after full extension.
- 🧊 Door modules require lifting the entire structure strictly vertically.
- 🧊 Plastic becomes brittle in the cold, give to warm up before removal.
- 🧊 If there are latches, they are activated by lightly pressing with your thumb.
What to do if the drawer is jammed?
If the vegetable drawer does not slide out due to ice or distortion, do not pull it by force. Try heating the joint area with a hairdryer at minimum temperature or leave the refrigerator open for 15-20 minutes. Often the cause of jamming is a bloated bag of products, which must be carefully pushed inside or removed through the gap.
Height adjustment and reinstallation of elements
After cleaning the glass and plastic surfaces, the stage of returning them to their place begins. It is important not only to insert shelves, but also to set their height correctly for optimal food storage. In refrigerators Pozis there are multiple rows of holes on the side walls, allowing you to vary the distance between the tiers.
To change the height, you need to rearrange the plastic stops (if they are removable) into the corresponding holes at the desired level. Make sure that all four stops are installed at the same height, otherwise the shelf will be skewed. Warth This may cause the glass surface to burst under the weight of food or interfere with the door closing.
Installing the shelf is done in the reverse order: first, the rear edge is inserted into the grooves or is placed on the back stops, then the front part is lowered until it clicks or fits snugly. Check the stability of the structure by lightly pressing on the center. Glass surface It should lie flat, without backlash or gaps.
| Element type | Direction of movement when removing | Key action | Risk in case of error |
|---|---|---|---|
| Glass shelf | Up, then towards yourself | Overcoming latches | Broken glass, chipped |
| Vegetable box | Upward (after extension) | Exit from the guides | Broken drawer runners |
| Door shelf | Strictly vertically upward | Removal from stiffening ribs | Crack at the bottom of the shelf |
| Display shelf | To the side (unlocking) | Unsnapping of the lock | Breakage of the lock mechanism |
Care of surfaces and elimination
Regular maintenance of the internal elements of the refrigerator is the key to hygiene and longevity of the equipment. Glass and plastic Pozis are easy to clean with warm water and a mild detergent. It is not recommended to use abrasive powders or hard brushes, which can leave micro-scratches where bacteria can accumulate.
A frequent problem is shelves freezing to the walls or to each other. This occurs due to high humidity and temperature changes. If you are faced with the fact that the shelf is “grabbed”, do not use force under any circumstances. Defrosting is the only safe way to free the elements.
Also, users sometimes complain about the unpleasant odor that plastic parts absorb. To eliminate it, you can use a solution of baking soda or activated carbon. After washing, all parts must be thoroughly dried before installing them back to avoid re-formation of ice.
⚠️ Attention: The design and location of the fasteners may vary slightly depending on the specific series of the refrigerator (for example, series RD, Mir or Sviyaga). Always check the product data sheet if standard methods do not work.
Can Pozis glass shelves be washed in the dishwasher?
The manufacturer, as a rule, does not recommend washing glass shelves in the dishwasher. High water temperatures and aggressive detergents can damage the plastic frame or special glass coating. In addition, powerful jets of water can dislodge a heavy shelf, resulting in glass breakage or damage to the machine itself. It is better to use a hand wash.
What to do if a glass shelf is cracked, where to buy a new one?
If the glass is cracked, you cannot use the shelf - it can crumble at any moment. You can order original spare parts from authorized service centers Pozis or from official dealers. When ordering, be sure to indicate the exact model of the refrigerator (located on a sticker inside the chamber), since the size and shape of the fasteners differ for different models.
Why does the shelf fall out by itself after installation?
Spontaneous falling out of the shelf indicates a malfunction of the fixing elements. Perhaps the plastic stops are broken, the frame of the shelf itself is deformed, or the holes in the wall of the refrigerator are worn out. In rare cases, a shelf may fall out if the refrigerator is not level and has a strong forward tilt. Check the adjustment of the legs of the unit.