Refrigeration equipment of the brand Pozis is famous for its reliability and durability, but even the highest quality equipment requires regular maintenance. Sooner or later, every owner faces the need for general cleaning inside the chambers, which is impossible without removing the internal elements. Many users face difficulties when trying to dismantle glass shelves or plastic lattice elements for fear of damaging the fasteners or breaking the glass.
Incorrect actions can lead to damage to the guides or, even worse, to injury due to broken tempered glass. In this article we will analyze in detail the design features of various refrigerator models, explain how to safely remove the shelves for washing, and give recommendations for caring for them. Understanding the structure of the internal space of your unit will help extend the life of the equipment and maintain its neat appearance. Pozis, we'll explain how to safely remove the shelves for cleaning, and give recommendations for caring for them. Understanding the internal structure of your unit will help extend the life of the equipment and maintain its neat appearance.
It is important to note that fastening methods may vary depending on the year of manufacture and the specific series of the refrigerator. Whether it is a classic Rowan or a more modern model with a system No Frost, the principles of dismantling have their own nuances that must be taken into account to successfully complete the task without extra effort.
Preparation for dismantling shelves and safety
Before starting the active phase of work, you need to properly prepare the workspace and yourself. The refrigerator Pozis is a heavy unit, but to remove the shelves it is not necessary to unplug it if you act quickly and carefully. However, if you plan to completely defrost or wash with a lot of water, turning off the power supply will be a necessary condition safety.
Empty the shelf of food. This seems obvious, but many people try to move loaded glass containers, which significantly increases the risk of glass falling and breaking. Place all jars, pans and packaging on the table or in a basin. Inspect the surface of the glass for cracks or chips, especially along the edges, as a damaged element may burst at the slightest misalignment.
⚠️ Attention: Never try to remove a shelf if there are heavy objects on it. This creates an uneven load on the guides and can lead to sudden destruction of the glass in your hands.
Prepare a soft place for temporary placement of the removed elements. It is best to cover the table or floor with a towel, rug or blanket. The glass of refrigerator shelves Pozis is quite strong, but its edges are vulnerable to impacts on hard surfaces such as tiles or laminate. It is also recommended to wear thick gloves if you are working with elements that have not been washed for a long time, or if there is a risk of cutting yourself on possible microscopic chips.
Design features of shelves in Pozis refrigerators
Understanding how exactly the shelf is attached in your model is the key to success. Engineers Pozis use several types of fasteners, which have evolved along with the model range. In older models, there was often a rigid fastening that required precise fit into the grooves, while modern versions are equipped with more convenient and safe mechanisms.
The main material for the shelves is tempered glass, which is framed with a metal or plastic edging. This edging not only gives an aesthetic appearance, but also protects the edges of the glass from chipping. There are guides located on the side walls inside the chamber. They can be made in the form of plastic rails, metal protrusions or combined systems.
In some models, especially in two-compartment refrigerators with a bottom freezer, the upper shelves may have special latches that prevent them from falling out when the door slams. Such elements require a special approach: you cannot simply pull them towards you, you first need to unlock the mechanism. Ignoring this rule is the most common cause of breakdowns plastic stops.
Why is the glass tempered?
The glass of Pozis refrigerator shelves undergoes a special heat treatment, which makes it 5-7 times stronger than usual. However, despite its strength, it is afraid of targeted impacts to the end and sudden temperature changes.
It is also worth mentioning the difference between the shelves of the main chamber and the door. If everything is relatively clear with the main horizontal surfaces, then balconies on the door they may have their own latches. In most cases, they are simply removed upwards, but in premium series they can be installed with screws or hidden clips.
How to remove a glass shelf: a step-by-step algorithm
The process of removing the main glass shelf requires consistency and accuracy. Do not use excessive force, as a properly installed shelf should move relatively freely. If you feel strong resistance, it means you have violated the technology or hit a limiter.
First, determine the type of guides. If they are simple plastic rails, grab the front of the shelf (the edging) with both hands. Smoothly lift the front edge up 2-3 centimeters. This action is necessary to remove the rear edge of the glass from the fixing grooves or hooks on the back wall of the refrigerator.
After the front part is raised, without lowering it, pull the shelf towards you. The movement should be confident, but smooth. Once the back edge is free, you can lower the front and remove the element completely from the chamber. If the shelf sits very tightly, try rocking it from side to side with a minimum amplitude in order to loosen possible contaminants that have jammed the mechanism.
☑️ Algorithm for removing the shelf
In models with a system No Frost or Low Frost the back wall is often closed with a plastic box with evaporator. In such refrigerators, shelves may have a more complex shape or additional cutouts for air circulation. When removing them, make sure that the protruding parts do not touch the plastic parts of the back wall, as they can be fragile at low temperatures.
Removing plastic elements and grilles
Plastic grilles and baskets in refrigerators Pozis are usually easier to remove than their glass counterparts, but there are some subtleties here too. Plastic may become more brittle over time, especially if the refrigerator was operating in intensive cooling mode or, conversely, was overheated. Therefore, all manipulations should be carried out without jerking.
The grates located above the vegetable boxes often simply lie on the ledges or are inserted into the grooves. To remove them, just lift one side, then the other and remove the element. If the grille is attached to side rails with latches, find the latch tabs (usually they are located on the sides in front) and press them while lifting the grille up.
- 🧊 Freezer baskets: usually removed by moving towards you after opening the door. If they are stuck due to ice, let them thaw a little.
- 🥛 Balcony shelves on the door: most often have an L-shaped profile and are removed with a vertical upward motion. Some models require bending the edge of the plastic a few millimeters.
- 🥚 Egg trays: in older models they can be screwed, in new ones they are simply inserted into the socket. Be careful not to break the thin partitions.
Pay special attention cooling unit coverif it is made of plastic and is located in the upper part of the refrigerator compartment. In some models Pozis it may interfere with removing the top shelf. It must be removed only if this is provided for in the instructions for a particular model, since inept handling may break the tightness of the cold air supply channel.
⚠️ Attention: If the plastic element is frozen to the wall or shelf, under no circumstances tear it off by force. Turn on the defrost mode or use a hairdryer at minimum power, directing warm air to the freezing area to avoid breaking the plastic.
Table: Types of fasteners and removal methods
For ease of systematization of information, we present the main types fasteners found in refrigerators Pozis, and the corresponding methods for their dismantling. This table will help you quickly identify your case and choose the right tactics.
| Type of fastening | Description of design | Removal method | Risks |
|---|---|---|---|
| Guide rails | Plastic or metal runners on the sides | Lift the front edge, pull it towards you | Warp and jamming |
| Latch latches | Plastic tabs on the sides or rear | Press the latch, lift and remove | Plastic breaks when pressed hard |
| Stops in the wall | The shelf lies on the ledges without additional fastenings | Simply lift and remove | Fall due to inaccurate grip |
| Combined | Combination of rails and rear limiters | Strictly follow the sequence: up-to yourself | Glass destruction when jerked |
As can be seen from the table, most problems arise due to a lack of understanding of the type of fastening. If you cannot determine the type, carefully inspect the sides of the chamber. All the guide elements are visible there. In difficult cases, when the design seems unique, it is better to find the technical data sheet of your model Pozis by the number indicated on the nameplate inside the camera.
Cleaning and caring for removed elements
After successful dismantling, the cleaning stage begins. Glass shelves of refrigerators Pozis can be washed under running water using mild detergents. However, there is a critically important rule: never wash cold glass with hot water. A sudden change in temperature is guaranteed to lead to cracks or complete destruction of tempered glass due to thermal shock.
Let the shelves sit at room temperature for 15-20 minutes after removing them from the refrigerator. This will equalize the temperature of the material. To wash, use a sponge and neutral dishwashing detergent. Abrasive powders and hard brushes are prohibited from being used, as they leave micro-scratches in which bacteria and dirt will accumulate in the future.
Plastic elements require even more delicate handling. Harsh chemicals can make plastic cloudy or sticky. After washing, rinse all parts thoroughly and wipe them dry with a soft towel. Wet shelves should also dry before being placed back into the refrigerator so that excess moisture does not turn into an ice crust when the unit is turned on.
While the shelves are drying, wipe the interior of the refrigerator. Use to clean hard to reach areas that have been covered by shelves. Pay special attention to the drainage hole on the back wall - it can be cleaned with a special flexible brush or a cotton swab to ensure free drainage of condensate.
Assembling and installing shelves back
Installing clean and dry shelves occurs in the reverse order. Make sure that the inside of the refrigerator Pozis is also dry. Insert shelves following the guides. First, slide the rear edge into the grooves or onto the stops, then smoothly lower the front part until there is a characteristic click or a tight fit.
Check the stability of the installed structure. The shelf should not wobble or be distorted. If you notice that the shelf is wobbly more than before, the plastic guides may be worn out. In this case, you can try to order new components from an official dealer Pozis or use special silicone pads for sealing.
Do not load the shelves with products right away. Let them sit empty for 10-15 minutes to make sure they are installed correctly and there are no extraneous sounds. After this, you can gradually fill the refrigerator with food, distributing the weight evenly.
⚠️ Attention: Technical characteristics and design may vary slightly depending on the specific modification of the refrigerator. If you are the owner of a rare or new model, check the manufacturer’s official instructions, as engineering solutions may change.
Regular cleaning and proper dismantling of elements is the key to the long service of your refrigerator. Cleanliness inside the chamber promotes better air circulation, which is especially important for models with the No Frostsystem, and prevents the appearance of unpleasant odors. By following these simple recommendations, you will keep your Pozis in perfect condition for many years.
Frequently asked questions (FAQ)
Can the shelves of the Pozis refrigerator be washed in the dishwasher?
The manufacturer does not recommend Wash glass shelves with plastic edging in the dishwasher. High water temperatures and aggressive detergents can cause the plastic to become cloudy, deformed, or peel off from the glass. The metal frame may rust. It is safer to wash them manually with warm water.
What to do if the shelf cracks during removal?
If the crack is through or comes from the edge, such a shelf cannot be used - it can crumble at any time under the weight of the food. You can temporarily use it as a lower shelf for light vegetables, but it is better to order a new original spare part according to the catalog number of your refrigerator model.
Why is it very difficult to remove the shelf, although it used to come out easily?
Most likely, dirt has accumulated on the guides, grease has frozen, or an ice crust has formed (if the seal of the door has been broken). Try defrosting the refrigerator completely. If the problem is dirt, use a plastic card or knife to carefully pry and clean the latch mechanism before trying again.
Where can I find the part number for a replacement shelf?
The part number is usually located on a label stuck to the end of the glass or on the plastic trim. You can also find the number in the service book or on the manufacturer’s official website by entering the refrigerator model. To order, it is better to contact authorized service centers Pozis.