How to properly turn on the freezer in the Atlant refrigerator: instructions with photos and tips

The freezer in the refrigerator Atlant is a key element for long-term storage of food, but turning it on for the first time or restarting after defrosting often raises questions. Especially when it comes to models with independent control temperatures in the refrigeration and freezer zones. In this article we will analyze not only the basic activation procedure, but also the nuances for different series Atlant (from classic MHM to modern No Frost), as well as typical errors that lead to incorrect operation.

It is important to understand: the switching algorithm may differ depending on control type (mechanical or electronic), the presence of a function Super Freeze and even on the year of manufacture of the equipment. For example, in models before 2018 there was often a separate toggle switch for the freezer, and in new ones there were touch panels with integrated modes. We will take all these points into account so that the instructions are suitable for 90% of the brand's devices. Atlant Before 2018, there was often a separate toggle switch for the freezer, and in new ones there were touch panels with integrated modes. We will take all these points into account so that the instructions are suitable for 90% of the brand’s devices.

Preparing the refrigerator for turning on the freezer

Before turning on the freezer, make sure that the refrigerator properly installed is ready for use. This is especially critical for new devices or after a long period of inactivity (for example, at the dacha in winter). Here are the key points:

• 🔌 Power: the refrigerator must be connected to a grounded outlet (not through an extension cord!). Mains voltage — 220–240 V.
• ⏳ Time after transportation: if the refrigerator was transported lying down, wait at least 4 hours before turning it on (to stabilize the oil in the compressor).
• 🧊 Cleanliness: remove packaging film, stickers, and dust from the shelves and walls. Wipe the internal surfaces with a weak solution of soda (1 tablespoon per 1 liter of water).
• 📏 Gaps: check that there is at least 5–7 cm for ventilation between the back of the refrigerator and the wall.

If the freezer was defrosted, wait until the ice has completely melted and the condensation has evaporated. In models with a system No Frost this takes up to 12 hours, in drip models - up to 24. Speeding up the process with a hairdryer or hot water is not allowed this will damage the seals and plastic.

Where is the freezer power button?

The location of the freezer controls depends on refrigerator models and its type. In Atlant there are three main schemes:

1. Mechanical control (toggle switches/knobs):
   • 🔄 In classic models (for example, Atlant MXM-1708) the freezer is turned on by a separate toggle switch located on the top panel inside the chamber or on the front side (right).
   • ⚙️ In two-chamber refrigerators with one compressor (series HM) the freezer is activated automatically when the entire device is turned on.
2. Electronic control (sensor/display):
   • 📱 In modern models (for example, Atlant XM 6025-031), the freezer is turned on through the menu on the display. Look for the button Freezer or the snowflake icon ❄️.
   • 🔢 The temperature is set using buttons +/– or touch arrows. The range is usually from –16°C to –24°C.
3. Hidden buttons:
   • 🔍 In some compact models (for example, Atlant M 7184-000), the freezer button is hidden under a decorative panel or inside the chamber on the side wall.

If you can’t find the button, pay attention to instructions for the model (usually there is a sticker with a QR code on the back wall) or use table below with the location of controls for popular series.

Step-by-step instructions: how to turn on the freezer

Consider a universal algorithm for most models Atlant. If your refrigerator has specific features, they will be indicated in separate blocks.

Check the connection to the 220 V network|

Make sure the freezer door is closed|

Find the control (toggle switch/button)|

Set the temperature in the range -18°C to -24°C|

Wait 1-2 hours until the first cooling-->

1. Plug in the refrigerator.

   Press the main power button (usually marked ON/OFF or symbol ⏻). In models with mechanical control, the toggle switch can be combined with a thermostat.

2. Activate the freezer.

   For mechanical models: turn the freezer toggle switch to position ON or 1–7 (where 1 — minimum power, 7 — maximum). In electronic: press the button Freezer or select a mode in the menu.

   Example path for electronic models:
   Settings → Modes → Freezer → On

3. Set the temperature.

   Optimal range - –18°C for storage and –24°C for freezing. In mechanical models, the temperature is regulated by turning the knob, in electronic models - with buttons +/–.

4. Wait for cooling.

   The first turn on of the freezer takes from 30 minutes to 2 hours (depending on the volume of the chamber and the external temperature). Do not load products immediately - this will increase the time it takes to enter the mode.

In models with the function Super Freeze (for example, Atlant XM 4324-000), after turning on the freezer, the fast freezing mode is automatically activated for 24 hours. It can be turned off manually through the menu.

What to do if the freezer does not turn on?

If after completing all the steps the freezer does not cool, check:

1. Power: is the indicator on the panel lit? If not, the problem is in the outlet or power cord.

2. Thermostat: in mechanical models, if the thermostat breaks down, the compressor does not start. Check if you hear a click when you turn the handle.

3. Door: if the seal is damaged or the door is not closed tightly, the chamber will not cool.

4. Compressor: if it is faulty, it may buzz, but won't start. In this case, repairs will be required.

Features of inclusion in models with No Frost

Refrigerators Atlant with system No Frost (for example, series XM or NM) have automatic defrosting, but their freezer is activated according to the same principle as in drip models. However, there are a few key differences:

• ❄️ Fan: After turning on the freezer, you may hear the fan running - this is normal. It distributes cold air throughout the chamber.
• 🔄 Thaw cycles: every 8-12 hours the compressor stops for 10-15 minutes to defrost the evaporator. Don't be alarmed if the temperature temporarily rises during this time.
• 📊 Display: electronic models may display the current freezer temperature on the screen (for example, F –18°C). If the value flashes, this is an error signal.

In models with Full No Frost (for example, Atlant XM 6026-031) the freezer and refrigerator compartments have a common air exchange. This means that when you turn on the freezer, the cooling of the main compartment is automatically activated (but with different temperatures).

⚠️ Attention: If there is strong noise or vibration in the refrigerator No Frost after turning on the freezer, check whether the back wall of the device is touching the furniture or the wall. The fan needs space for air circulation.

Table: location of freezer power buttons in popular models Atlant

If your model is not in the table, look for instructions by the number indicated on the nameplate (metal plate on the back wall). For example, for the model Atlant XM 6025-031 look for documentation on the code XM6025.

Typical errors when turning on the freezer

Even experienced users sometimes make mistakes that lead to the freezer not working properly. Here are the most common ones:

• ❌ Ignoring the waiting time: if the refrigerator was transported lying down, turning on the compressor earlier than 4 hours will lead to breakdown of the compressor.
• ❌ Incorrect temperature: setting the value higher –12°C will not provide high-quality freezing, and lower –24°C increases the load on the compressor.
• ❌ Overloading with products: if you fill the freezer immediately after turning it on, the temperature will take longer to rise and the compressor will work without stopping.
• ❌ Closing the ventilation holes: in models No Frost do not place food close to the back wall - this will block air circulation.
• ❌ Using an extension cord: The refrigerator must be connected directly to the outlet. Extension cords may not withstand the starting current of the compressor.

Another common mistake is confusion between modesFor example, in models with a button. Super Freeze users sometimes think that this is the main inclusion of the freezer, although in fact it is an additional function for quick freezing.

⚠️ Attention: If, after turning on the freezer, an error code appears on the display (for example, E1 or F2), do not try to reset it yourself. In 80% of cases, this indicates a faulty sensor or compressor, and diagnostics from a service center is required.

How to check that the freezer is working correctly?

After turning on the freezer, you need to make sure that it is working properly? is functioning correctly. Here's what to check:

1. Compressor sound:

   5-10 minutes after switching on, a uniform hum should appear (in models No Frost the fan will also be heard. If the compressor clicks but does not start, this is a sign of a malfunction.

2. Temperature:

   Place the outdoor thermometer in the freezer for 1-2 hours. The temperature should drop to the set value (for example, –18°Cwith an error of ±2°C.

3. Ice on walls:

   In models No Frost there should be no frost. In drip refrigerators, a thin layer of ice is allowed, but if it builds up faster than a month, check the seal or thermostat.

4. Operation cycles:

   The compressor must be running. 20-30 minutes, then turn off for 10-15 minutes. If it works without stopping or, on the contrary, turns on too rarely, this is a reason for diagnostics.

For an accurate check, use test mode (if it is in your model). data-i="246">5 seconds until the indicator flashes. Atlant XM 6025-031 To do this you need to press and hold the button Super Freeze 5 seconds until the indicator flashes.

— faulty temperature sensor;

— freon leak;

— capillary tube clogged.

In these cases, professional repair is required.-->

Frequently asked questions

The freezer is turned on, but it is not freezing. What should I do?

First check:

• Is the refrigerator connected to the network (it is on). Is there a light inside?).
• Is the freezer door closed tightly (perhaps the seal or food is in the way).
• Is the temperature set too high (should not be higher –12°C for freezing).

If everything is in order, but the freezer does not work, the reasons may be more serious: compressor failure, freon leak or control board malfunction. In this case, contact a service center.

Is it necessary to defrost the freezer compartment No Frost?

In refrigerators with a system No Frost automatic defrosting occurs every 8-12 hours, so manually There is no need to defrost the freezer. However once a year it is recommended:

• Unplug the refrigerator.
• Take out all the food and shelves.
• Rinse the internal surfaces with warm water. water and soda.
• Wipe dry and leave the door open for 1-2 hours for ventilation.

This will help eliminate possible odors and maintain hygiene.

What temperature should be in the freezer Atlant?

Optimal temperature depends on the purpose:

• –18°C —standard mode for storing frozen foods (up to 3 months).
• –24°C —deep freezing mode (for long-term storage or quick freezing of fresh foods).
• –12°C —minimum temperature suitable for short-term storage (up to 1 week).

In most models Atlant the factory setting is –18°C. You should change it only if necessary (for example, for freezing berries or meat).

Is it possible to turn on the freezer separately from the refrigerator?

It depends on models:

• In two-compressor refrigerators (for example, Atlant DX-4401-000), the freezer and refrigerator compartments are controlled independently. You can turn on only the freezer by turning off the main compartment.
• In single-compressor models (most series HM i MHM) the freezer and refrigerator operate synchronously. not allowed.

To find out the type of your refrigerator, look at the number of compressors on the back (one or two black cylinders) or check the documentation.

How long does it take for the freezer to reach temperature?

The time it takes to reach operating mode depends on:

• Chamber volume: small freezers (up to 100 l) cool in 1–2 hours, large ones (200 l+) - up to 4–6 hours.
• Room temperatures: if the room is hot (higher 30°C), the process will take 30–50% longer.
• Load: an empty chamber will cool faster than a filled one products.

To speed up the process, do not open the door unless necessary and do not put warm foods in the freezer.