Assembling refrigeration equipment after delivery or general cleaning can often become stressful, especially when it comes to fragile glass elements. Owners of equipment Pozis often encounter difficulties when trying to place shelves in their rightful places, since the design may seem complicated at first glance. Correct installation is critical not only for aesthetics, but also for the safety of food storage, as well as for the correct circulation of cold air inside the chamber.
Many users mistakenly believe that all shelves are universal and can be inserted arbitrarily, but refrigerators Position have specific mounting systems and height levels. Improper installation can cause the glass to warp, break, or even cause heavy products to fall. In this article we will analyze in detail the algorithms of action for various models, including series with the system No Frost and classic drip systems.
Before proceeding with installation, you need to free up the space inside the chamber and make sure the guides are clean. Understanding how fasteners work will allow you to avoid breaking plastic elements and glass surfaces. We will look at the nuances of installing both standard grilles and specialized separators for bottles and eggs.
Design features of Pozis refrigerator shelves
The brand's refrigeration equipment Pozis is distinguished by its reliability and thoughtful ergonomics, however, the design can vary significantly depending on the year of manufacture and model series. The main attention should be paid to the type of shelves: they can be made of tempered glass with edging or be metal lattices with a polymer coating. Glass shelves usually rest on plastic frames or special protrusions in the body, while the lattices often have built-in hooks-fixers.
It is important to distinguish between shelves for the main refrigerator compartment and elements for the freezer compartment. The freezer often uses lattice structures that allow cold to circulate freely between the drawers. In the main chamber, glass serves as a barrier to temperature zones and makes cleaning the device easier. Some models are equipped telescopic guidesthat extend together with the shelf, which requires special care during installation.
⚠️ Attention: The glass of the shelves is tempered, but its edges are sensitive to pinpoint impacts. When installing, avoid contact of the corners of the glass with the metal parts of the case or the walls of the refrigerator.
Models with a system Smart Cooling or improved insulation, where the shelves may have additional rubber seals around the perimeter, deserve special attention. These seals prevent fluid from leaking to lower levels and dampen compressor vibration. When installing such elements, it is important not to damage the rubber contour and ensure its tight fit to the body.
Preparation for installation and safety measures
Before starting any manipulations with the interior of the refrigerator, you must turn off the power to the device. Although installing shelves does not require work with electrical components, safety comes first, especially if there is condensation in the chamber or you plan to combine installation with a sink. Unplug Pozis from the network and give it time to equalize temperatures if it has just been defrosted.
Carefully inspect all components for manufacturing defects or damage received during transportation. Cracks in the glass, even microscopic, under the load of food can lead to the destruction of the shelf. Metal grilles should not have dents or damage to the integrity of the coating, which protects the metal from corrosion in conditions of high humidity.
- 🧤 Wear fabric gloves to avoid leaving greasy marks on the glass and improve hand grip on a smooth surface.
- 🧹 Wipe the seats and guides in the refrigerator body with dry with a rag, removing dust and packaging residues.
- 📏 Measure the dimensions of the shelves and make sure that they correspond to those stated in the instructions for your specific model Pozis.
It is best to work together, especially when it comes to wide glass shelves for the lower tiers. One person will hold the element, and the second will control the fit of the clamps into the grooves. This will reduce the risk of accidental falling and breaking of glass, and will also allow you to more accurately position the part relative to axial lines camera.
☑️ Check before installation
Algorithm for installing glass shelves
Installation glass platforms is the most critical stage of assembly. In refrigerators Pozis glass is usually placed in a special plastic frame or installed on sides built into the walls. If your model has removable plastic trims, first make sure they are properly latched around the perimeter of the glass. Then the structure must be brought into the chamber strictly horizontally.
Insert the shelf into the space of the refrigerator, focusing on the back wall. Often there is a special stop or groove into which the rear edge of the glass should fit. As you lower the front section smoothly, keep an eye on the side guides. Some models use spring-loaded latcheswhich require light pressing or lifting of the shelf to engage.
After installation, check the stability of the structure. It should not wobble or have a noticeable slope. If the shelf does not lie snugly, it may be misplaced or the sides may be reversed (the front and back may be different shapes).
It is critical not to place heavy products on a newly installed shelf until you are sure it is securely fastened. Give the plastic (if there is a frame) or rubber legs time to take the correct shape under the own weight of the structure.
Installation of lattice shelves and drawers
Lattice shelves in refrigerators Pozis are most often found in freezer compartments, but can also be present in the main chamber as additional levels. Their design usually involves the presence of four hooks that cling to vertical posts or special holes in the walls of the chamber. Installation of such elements requires precise placement of the horizontal grooves.
For installation, grasp the grille by the sides with both hands. Bring the rear hooks to the rear holes on the side of the refrigerator and hook them into place. Then, without releasing the back, lower the front hooks into the corresponding front holes. A characteristic locking sound should be heard. If the grille has anti-vibration pads hooks, make sure that they do not interfere with a tight fit.
| Element type | Installation location | Mounting feature | Max. load |
|---|---|---|---|
| Glass shelf | Main chamber | Support on sides/frame | up to 25 kg |
| Metal grille | Freezer/Main | Hooks in holes | up to 15 kg |
| Shelf for bottles | Door/Lower tier | Special cutouts | up to 10 kg |
| Egg separator | Door | Insertion in grooves | up to 2 kg |
Boxes for vegetables and fruits, which are often installed on the lower levels, have their own guides. In models Pozis they can ride on plastic rails or simply rest on the bottom of the chamber. When installing a glass lid over the vegetable drawer (if it is provided for in the design), make sure that it does not block the cold air supply channels.
⚠️ Attention: Never use grid shelves in areas intended exclusively for glass. The absence of a solid surface will disrupt the temperature regime in the lower zones of the refrigerator.
Installation of door elements and accessories
The refrigerator door Pozis is equipped with many useful elements: shelves for bottles, trays for eggs and containers for small items. Plastic shelves on the door are usually attached by snapping them into special profiles. To install, take the element, align it with the guides on the inside of the door and press until it clicks. They need to be removed and installed with moderate force, since plastic can become brittle in the cold or after long use.
The egg tray in modern models often has a transparent lid and is installed in the top or middle row of the door. It is fixed either with latches or simply inserted tightly into the designated niche. It is important to correctly orient the tray so that the lid opens in a convenient direction and does not touch the products on adjacent shelves when the door slams.
- 🥚 Install the egg tray in the area with the most stable temperature, usually the middle of the door.
- 🍾 Mount the shelf for tall bottles at the very bottom of the door, where the structure most reinforced.
- 🧊 Place containers for small items so that they do not interfere with the door being tightly closed.
If you install additional dividers or holders included in the delivery kit, follow the diagram in the instructions. Often these elements have a universal mount that allows you to change their position depending on how full the refrigerator is. Use flexible configurations to optimize space.
Checking correct assembly and typical errors
After all the shelves and drawers are in place, it is necessary to conduct a final inspection. Close the refrigerator door Pozis and check for gaps or distortions. Shelves should not touch products on lower levels or interfere with the free movement of drawers. Any friction will create noise and can damage the plastic.
One of the common mistakes is installing the shelf upside down. Some models have grooves or ridges on the bottom of the shelf that, when upside down, prevent the door from closing tightly or create an unstable platform. Always check the shape of the sides: they should be directed upward so that the products do not roll down.
Users also often ignore the horizon level. If the refrigerator is not level, then the shelves will be at an angle. As a result, liquid in open containers may overflow to one side. Before installing the shelves, make sure that the unit itself is level using adjustable supports.
⚠️ Attention: The characteristics and design of the shelves may vary depending on the specific modification of the refrigerator. Always check the technical documentation supplied with your device, as the manufacturer may make changes to the package without prior notice.
Questions and answers (FAQ)
Can shelves be washed in the dishwasher before installation?
Glass and metal shelves Grates, as a rule, can be washed in the dishwasher at a temperature no higher than 40-50 degrees. However, it is better to wash plastic frames, edgings and door elements by hand, since aggressive detergents and high temperatures can deform the plastic or make it cloudy.
What to do if the shelf does not fit into place and prevents you from closing the door?
Most likely, the shelf is installed incorrectly (upside down or pushed back). Take it out and inspect the fastenings on the walls of the refrigerator and the shelf itself. Make sure you don't mix up the height levels - some models have higher shelves that are wider or narrower than those below. Do not try to slam the door by force, this will lead to glass breaking.
How to replace a broken shelf in a Pozis refrigerator?
To replace it, you need to find out the exact model of your refrigerator (indicated on a sticker inside the chamber or on the back). You can order original spare parts from authorized service centers Pozis or from official dealers. The use of shelves from other models is not recommended, since the dimensions and fastening system may not match, which is dangerous for operation.
Why does the glass shelf rattle when the refrigerator is operating?
Rattling can occur due to vibration of the compressor if the shelf does not fit tightly to the supports. Check if it is installed level. Sometimes it helps to place a thin piece of porous material (special tape) under the supports, but in modern models Pozis this is rare. Most often, it is enough to simply adjust the shelf in the grooves.