Assembling refrigeration equipment after purchase or deep cleaning often turns into a real quest, especially when it comes to the lower compartment. Equipment owners LG often face a situation where a seemingly simple plastic container does not fit into place, gets stuck or falls out when trying to close the door. Understanding how how to insert drawers into an LG refrigerator is correct is necessary not only for the aesthetic appearance, but also to maintain the functionality of the cooling system.
The design of the freezer and freshness zone may vary significantly between different models. In some cases, telescopic guides are used, in others, simple runners or suspension systems are used. Incorrect installation may result in broken plastic fasteners or damaged seals. In this article, we will analyze in detail the algorithm of actions for various types of structures so that you can avoid common mistakes.
Preparation for installation and checking components
Before proceeding with installation, you need to make sure that all components are in place and have no visible defects. Carefully inspect yourself plastic container, the guide rails and the back wall of the chamber. Often the problem lies not in a lack of skill, but in the presence of shipping packaging or protective film that they forgot to remove.
Make sure that the interior of the camera is completely clear of foreign objects. Even a small piece of foam can displace the axis of installation, and the box will not fit into place. Wipe the surface dry, as sliding on a wet surface may result in incorrect positioning.
- 🧊 Check the integrity of the plastic runners for cracks or chips.
- 🧊 Make sure that the back wall of the refrigerator does not have dents in the mounting area.
- 🧊 Remove all shipping film from the box itself and guides.
Particular attention should be paid to the model of your device. In the series LG DoorCooling+ or LG InstaView the design may have additional elements, such as an air circulation system, which can be easily damaged by careless movement.
⚠️ Attention: Never try to insert the box by force. Plastic becomes brittle at low temperatures, and excessive pressure will lead to broken fasteners beyond repair.
If you notice that some parts are missing, check the instructions for the specific model. Sometimes manufacturers supply universal drawers that require the installation of additional adapters for specific series.
Installation of drawers in the freezer (lower compartment)
The freezer compartment of refrigerators LG is most often equipped with a system of drawers on skids. This is the most common type of design, where precision in the grooves is important. Before installation, ensure that the bottom guides on the bottom of the chamber are clear and level.
Grip the container by the top edges with both hands. Tilt the front of it slightly upward so that the rear lower edge fits into the special recesses or hooks on the bottom of the chamber. This is a critically important point: if the back part is not fixed, the drawer will fall out when opened.
☑️ Algorithm for installing a freezer drawer
After the back part is fixed, smoothly lower the front part of the drawer. You should hear a characteristic click or feel that the mechanism has “settled” into place. Smoothly pull out and close the drawer several times, checking for smooth movement.
Some models, for example, the series LG No Frost, use telescopic guides. In this case, the box must be inserted strictly horizontally, aligning the side grooves with the rails. Do not allow distortions, as this can lead to jamming of the mechanism.
What to do if the drawer falls out?
If the drawer constantly falls out, check whether the runners are upside down. Sometimes they may become dislodged during transportation. Also make sure that you do not mix up the top and bottom drawers if they have different depths.
If you fill one side with heavy food and leave the other empty, this may create a misalignment and the drawer will no longer move out properly.
Installation of Zero Zone containers
The freshness zone, or Zero Zone, in refrigerators LG often has a more complex design, as it is intended for storing products that require special temperature conditions. The boxes here can be equipped with special dampers or have transparent lids.
Installation of such containers requires special care. First, the main body of the drawer is installed, which is usually fixed on the side rails. Then, if provided by the design, an internal partition or ventilation system is installed.
- ❄️ Make sure that the holes for air circulation are not blocked.
- ❄️ Check the tightness of the lid, if it is included.
- ❄️ Do not fill the box with products until edges before checking the progress.
In models with technology Linear Cooling it is important not to damage the temperature sensors, which may be located in close proximity to the drawers. When installing, try not to touch the back wall sharply.
Some users are faced with the fact that the freshness zone drawer does not close completely. This is often due to improper installation of the seal or the presence of an obstacle in the form of food packaging. Check the perimeter of the drawer for the presence of foreign objects.
Installation features in two-chamber models
In two-chamber refrigerators LG the distribution of drawers may be different. The upper chamber (refrigerator) usually has glass shelves, but the lower levels can be equipped with deep containers for vegetables and fruits.
A feature of such boxes is often the presence of a dividing partition. It can be removable or fixed. If the partition is removable, make sure that it is installed in special grooves on the bottom of the box before inserting it into the chamber.
| Drawer type | Location | Installation features | Mounting type |
|---|---|---|---|
| Vegetable | Lower level | Requires removal of the partition | Skid |
| Freshness zone | Middle level | Complex fixation system | Telescopes |
| Freezer | Lower chamber | Reinforced design | Guides |
| Minibar | Door/Shelf | Light plastic | Grooves |
When installing drawers in two-chamber models, it is important to follow the order. The lower levels are installed first, then the upper ones. This will provide access to all fasteners and will avoid situations where the installed upper drawer interferes with the installation of the lower one.
Pay attention to the markings. Some boxes LG are (labeled) "Vegetable" or "Fruit". Although they are often interchangeable, it is best to follow the manufacturer's recommendations for optimal storage.
Solution: Drawer won't stay in place or gets stuck
If you encounter a drawer that won't stay in place, don't rush to use force. In 90% of cases, the problem is an incorrect angle of inclination or misalignment of the guides. Try to remove the box completely and repeat the procedure, carefully monitoring the alignment of the grooves.
A common problem is the skew of the runners. If the refrigerator was not level or was subject to vibration during transportation, the metal or plastic guides could become dislodged. Gently adjust them using a flathead screwdriver wrapped in a cloth so as not to scratch the plastic.
Another reason is the deformation of the box itself. If the refrigerator was overloaded or exposed to high temperatures (for example, when washed with hot water), the plastic could “lead.” In this case, the drawer may not stand up straight.
⚠️ Attention: If you find a crack on the guide or the drawer itself, operating it in this form is dangerous. The box may collapse along with the food, damaging the floor of the refrigerator or your legs.
Sometimes the problem is solved by simply adjusting the legs of the refrigerator. If the device is tilted forward, the drawers may slide out on their own or, conversely, not close completely due to changes in the geometry of the chamber.
Care for retractable mechanisms and prevention
In order for the drawers to serve for a long time and move easily, they need to be looked after. Periodically, for example, once every six months when defrosting, it is recommended to remove all containers and wash them with warm water and a mild detergent.
Pay special attention to the runners. They can collect dust, crumbs and sticky food residues, creating resistance to movement. Wipe the guides with a damp cloth and then dry.
- 🧼 Use only soft sponges to avoid leaving scratches on the plastic.
- 🧼 Avoid abrasive cleaners, they make the plastic dull and brittle.
- 🧼 After washing, be sure to let Allow parts to dry before installation.
To improve sliding, you can use special silicone-based lubricants that are safe for contact with food. Do not use vegetable oil or petroleum jelly - they oxidize over time, stick and begin to smell unpleasant.
Can the drawers be washed in the dishwasher?
Manufacturers usually do not recommend washing plastic refrigerator drawers in the dishwasher. High water temperatures (usually above 60°C) can cause the plastic to deform and the drawer will no longer fit into place correctly.
Regular maintenance will prolong the life of the mechanisms and maintain the aesthetic appearance of your refrigerator LG. Clean and serviceable drawers are not only convenient, but also hygienic.
FAQ: Frequently asked questions
Is it possible to swap drawers between different LG models?
In most cases, no. Although the brand is the same, the sizes and shapes of fasteners for different series (for example, LG GA-B and LG GC-B) may differ. Using an unsuitable drawer may cause it to break or damage the camera.
What to do if the handle of the drawer breaks?
If the handle breaks off, but the drawer itself is intact, you can try to order an original spare part according to the service code of the model. As a last resort, some craftsmen carefully seal the plastic, but this is a temporary solution.
Why does the freshness zone box become covered with frost?
This may indicate a loose fit of the box or a violation of the chamber seal. Check whether the drawer is inserted correctly and that there are no gaps between it and the body of the refrigerator.
How to remove the drawer for a complete replacement if it is stuck?
Try heating the plastic guides with a hairdryer (at minimum temperature) for 10-15 seconds. The plastic will become more elastic, and the jammed mechanism may become free. Do not overheat!