Suddenly going out the light inside the refrigerator compartment is not just an inconvenience that prevents you from viewing the contents of the shelves. This is a signal that the resource lighting fixture has been exhausted and the time has come to replace it. In refrigerators of the brand Ariston, as in many other modern models, this process is quite simple, but requires compliance with safety precautions and an understanding of the design of the device. Ignoring the problem may lead to you starting to confuse products or not noticing spoiled food.
Before you begin dismantling, you need to clearly understand what type of lighting you are dealing with. Older models were often equipped with incandescent lamps, while new versions can be equipped with halogen light sources. The type of lamp determines not only the method of removing it, but also the choice of a suitable replacement. In this article, we will analyze in detail all the stages of work so that you can independently restore the brightness of your refrigerator. Ariston can be completed LED modules or halogen light sources. The type of lamp determines not only the method of removing it, but also the choice of a suitable replacement. In this article, we will analyze in detail all the stages of work so that you can restore the brightness of your refrigerator yourself.
Independent repair of the lighting system is a great way to save on calling a technician, since the procedure takes only 15-20 minutes. However, it is important to act carefully so as not to damage Cover lamp or the wiring. We will look at the necessary tools, types of bases and a step-by-step algorithm of actions that is suitable for most models of the brand. Correctly performed replacement guarantees a long service life of the new element.
Preparation for replacement: tools and safety
Any work with electrical appliances begins with ensuring your own safety. A refrigerator is a complex device that operates on a 220-volt network, so the first thing you should do is completely de-energize the unit. Simply turning off the button is not enough; you must unplug the plug from the socket. This will eliminate the risk of electric shock if you accidentally touch the contacts inside the camera.
After turning off the power, prepare the workplace. You may need a stable stepladder or stool to reach the lamp if it is located high up. It is also worth preparing the necessary tools in advance. In most cases, to remove the lamp in refrigerators Ariston a flat screwdriver is required, but sometimes you can do without it.
Be sure to check the presence of a new lamp before starting work. If you have not yet purchased a replacement, find out the parameters of the burnt element. A base E14 or specific bases for halogen lamps is often used. An incorrectly selected part may not fit into place or burn out instantly after switching on.
⚠️ Attention: Never try to replace the lamp without disconnecting the refrigerator from the power supply. Even short-term contact with live parts can be life-threatening.
☑️ Checklist for preparing for repairs
Determining the type of lamp and base
Refrigerators Ariston of different years of manufacture can be equipped with different types of lighting. Understanding exactly what light source is installed in your model is critical to purchasing the correct replacement. Most often there are three main options, each of which has its own design features and service life.
The first and most common option is the classic incandescent lamp with E14 base. It looks like a smaller version of a regular household light bulb. Such light sources are cheap, but have a short service life and get very hot, which is not always useful for the temperature regime of the refrigerator.
The second option is halogen lamp. It is more compact, shines brighter and lasts longer than an incandescent lamp. However, when installing a halogen lamp, you should not touch its glass bulb with bare hands, as grease marks can lead to rapid burnout. The third option is LED backlighting, which is often built into the housing and requires more complex replacement.
Is it possible to install LED instead of an incandescent lamp?
Yes, you can. LED lamps consume less energy and heat less. The main thing is to make sure that the base matches (usually E14) and the dimensions of the new LED lamp allow it to fit under the lampshade, which may be tight.
To accurately determine the type of lamp, it is best to remove the burnt element and look at the markings. If the lamp breaks, you will have to navigate to the seat. The table below shows the main characteristics of the light sources used.
| Lamp type | Socket type | Service life | Features |
|---|---|---|---|
| Incandescent | E14 | 1000 hours | Gets very hot, cheap |
| Halogen | G4 / G9 | 2000-4000 hours | Bright light, cannot be touched with hands |
| LED (light emitting diode) | E14 / Built-in | 30,000+ hours | Economical, does not heat up |
| Luminescent | Special. connector | 10,000 hours | Rarely, uniform light |
Dismantling the lampshade and removing the old lamp
The process of removing the protective lampshade in refrigerators Ariston may vary depending on the specific series of the device. In most models, the lampshade is attached to latches, which are located on the sides or top. To remove it, you need to carefully press on the latches and pull the plastic casing towards you.
Use a flat-head screwdriver if you cannot pry the latches with your fingers. Proceed with caution: plastic becomes brittle in the cold, and excessive force can lead to breakage of the fasteners. Pry up the lampshade in the places indicated in the instructions, or where the joining seams are visible.
After removing the lampshade, you will gain access to the lamp. If it is an incandescent lamp, you just need to unscrew it counterclockwise. Halogen lamps are often simply removed from the socket, but can be secured with an additional clamp. Be careful: if the lamp breaks inside the base, the remaining glass must be carefully removed with tweezers, having first turned off the power to the device.
In some models Ariston with the system No Frost access to the lamp may be hidden behind a decorative panel on the back wall. In this case, you may need to remove a shelf or drawer to gain easy access to the lighting area. Always evaluate the design visually before using tools.
Installing a new light source
After the old element is removed, you can begin installing a new one. If you are using an incandescent or LED lamp with an E14 base, screw it in clockwise until it stops, but without being too fanatical. Excessive force can damage the threads of the socket, which will lead to more serious repairs.
When installing a halogen lamp, remember the “clean hands” rule. Handle the new lamp by the base only or use a clean cloth. If you accidentally touch the glass, wipe it with alcohol before installation. When heated, fat from the skin will cause local overheating of the glass and destruction of the flask.
Make sure that the wires going to the cartridge are not pinched and do not touch the heating elements (if there are any nearby). After installing the lamp, return it to its place plafond. It should snap into place with a characteristic click. If the lampshade is loose, check whether the guides are positioned correctly.
Now you can turn on the refrigerator. The door must be closed for the light sensor (if mechanical) or magnetic reed switch to allow the lamp to light up. If the light appears or lights up without blinking, then the replacement was successful.
What to do if the light does not light up
There are situations when replacing the lamp does not solve the problem, and the light in the refrigerator Ariston never appears. In this case, the reason may lie not in the light source itself, but in other elements of the system. The first step is to check the serviceability of the new lamp on another device to exclude defects.
The second common reason is a malfunction limit switch (of a button or magnetic sensor) that responds to the opening of the door. If the mechanism is stuck or broken, the refrigerator “thinks” the door is closed and does not supply power to the lamp. Try to press the limit switch button manually - if the light comes on, the problem is in the door mechanism.
The third reason is oxidation of the contacts in the cartridge. Over time, in conditions of high humidity, the contacts can become coated with oxide, which prevents the passage of current. In this case, you will need to clean the contacts or replace the cartridge itself. It is also worth checking wiring for kinks or damage.
⚠️ Attention: If you checked the lamp, limit switch and contacts, but the light did not appear, the control module or wiring inside the housing may be faulty. It is better to entrust further repairs to a specialist.
In rare cases, the problem may be in the control board, especially in models with an electronic display and a complex system lighting controls. If errors appear on the display or indicators behave strangely, this confirms the electronic nature of the malfunction.
Prevention and selection of a quality replacement
To prevent the lighting problem from returning too often, it is important to choose high-quality components. Cheap Chinese-made lamps often have a low resource and are sensitive to voltage surges, which are not uncommon in our networks. Give preference to proven brands specializing in refrigeration or lighting equipment.
Pay attention to the lamp power. The instructions for the refrigerator Ariston usually indicate the maximum value, which is not recommended to be exceeded (often 15 W). Installing a lamp that is too powerful can lead to melting of the lampshade or socket due to overheating.
Regularly check the condition of the lampshade and the cleanliness of the glass. Dirt and grease settling on the lampshade not only degrades the illumination, but also contributes to overheating of the lamp. Wipe the internal elements of the refrigerator during each general cleaning using a soft cloth.
Following these simple rules will extend the life of not only the lighting system, but also the entire refrigeration unit. Bright and clean light inside the chamber helps you find products faster and maintain order.
Is it possible to use an LED lamp instead of a regular one?
Yes, this is even preferable. LED lamps heat up less, consume less energy and last longer. The main thing is to choose the right base (usually E14) and make sure that the dimensions of the LED lamp allow it to fit under the ceiling.
Why is the lamp blinking in the Ariston refrigerator?
Blinking may indicate poor contact in the socket, a malfunction of the lamp itself (especially if it is LED and of poor quality) or problems with the power supply/control unit. Also, the cause may be sticking of the door limit button.
Where can I find the spare part number for an Ariston lamp?
The number of the original spare part is often indicated on the burnt lamp itself or in the technical data sheet of the refrigerator. You can also find it on the manufacturer's official website by entering the model of your device, or contact an authorized service center.
What to do if the lampshade is broken?
If the plastic lampshade is broken, it is advisable to replace it, as it protects products from fragments (if the lamp breaks) and directs the light. You can order a new one based on your refrigerator model. You can temporarily operate without it, but be careful.