Biryusa Medline refrigerator: complete instructions for setting the temperature and modes

Refrigerators Biryusa Medline are popular domestic models that combine reliability and functionality. However, even such equipment may have questions about setting up: how to set the optimal temperature, activate modes superfreezing or vacations, as well as what to do if the refrigerator is not working correctly. In this article you will find detailed instructions taking into account the features of different modifications of the series Medline, as well as tips for eliminating typical problems.

It is important to understand that proper configuration not only extends the life of the equipment, but also ensures safe storage of products. For example, an incorrectly selected mode can lead to overfreezing of vegetables or insufficient cooling of meat. We will analyze all the nuances - from basic parameters to hidden functions that are not written about in the standard instructions.

If your model Biryusa Medline is equipped with electronic control, the adjustment algorithm will differ from mechanical versions. We took both systems into account, so the instructions are suitable for most refrigerators in this line, released after 2018.

1. Basic controls: where and what to press

Before you start setting up, understand the control panel of your model. In refrigerators Biryusa Medline there are two types of interfaces:

• 🔘 Mechanical control - rotary controls (usually located inside the refrigerator compartment on the right wall). Suitable for budget models, for example Biryusa 10M or Biryusa 18M.
• 📱 Electronic control - touch buttons or display (more often found in models Biryusa 130M, Biryusa 220M). Allows you to more accurately control the temperature and activate additional modes.

In mechanical versions, the temperature regulator usually has 5–7 positions (from 1 —the warmest, to 7 —the coldest). In electronic models, the temperature is set in digital values (for example, +4°C for the refrigerator compartment and -18°C for the freezer).

Pay attention to the indicators:

• 🟢 Green LED - the refrigerator is turned on and operating in normal mode.
• 🟡 Yellow/red - signal about high temperature or open door (depending on the model).
• ❄️ Snowflake symbol - the super freezing mode is activated.

⚠️ Attention: In models with electronic control Biryusa Medline after a power outage, the settings are reset to factory settings. They will have to be configured again!

2. Optimal temperature conditions for the refrigerator and freezer compartments

The manufacturer recommends the following parameters for Biryusa Medline:

For temperature settings in mechanical models:

1. Find the regulator (usually under the shelf in the refrigerator compartment).
2. Turn it to position 3–4 (corresponding +4°C).
3. For the freezer, use a separate regulator (if it exists) - set on 5–6 (-18°C).

In electronic models:

1. Press the button Temp (or Set).
2. Use the +/– buttons to set the value for refrigerator compartment (for example, +4°C).
3. Press Freezer (or Freezer) and repeat the setting for the freezer compartment.
4. Save changes with the button OK or automatically (after 5 seconds of inactivity).

3. “Super Freeze” mode: when and how to use

The function super freezing (indicated by ❄️ or Super Freeze) is designed for quickly freezing a large amount of food. In refrigerators Biryusa Medline it works as follows:

• 🍗 Activated when adding fresh products (meat, fish, berries) - prevents defrosting already stored
• ⏳ Works 24–48 hours, then automatically turns off (in some models you need to turn it off manually).
• ⚡ Increases energy consumption by 10–15%, so it is not recommended to use unless necessary.

How to turn it on:

• B mechanical models: turn the freezer control to maximum (position 7) - the mode is activated automatically.
• In electronic models: press the button Super Freeze (or hold Freezer 3 seconds). The indicator ❄️ will light up on the display.

⚠️ Attention: If you forget to turn off super freezing, the compressor will wear out, which can lead to breakdown after 1-2 months of constant operation in this mode.

What to do if the mode does not turn off automatically?

If after 48 hours the ❄️ indicator continues to light, try:

1. Manually press the button Super Freeze again.

2. network for 10 minutes (full reset).

3. Check if the ventilation grill is clogged (overheating may block the shutdown).

If the problem persists, there may be a malfunction of the temperature sensor or control board. Contact the service center.

4. Vacation mode: how to set up and why is it needed

Function "Vacation" (or Holiday) is designed to save energy when the refrigerator is not used for a long time. In this mode:

• 🧊 The refrigerator compartment supports. temperature +12°C…+15°C (enough to prevent mold).
• ❄️ The freezer continues to operate as normal (unless disabled separately).
• 💡 Energy consumption is reduced by 30–40%.

How to activate:

1. Make sure there are no perishable foods in the refrigerator compartment.
2. Press and hold the button electronic models press and hold the button Holiday (or Holiday) for 3 seconds until the indicator lights up.
3. In mechanical models turn the refrigerator compartment control to position 0 or Min.

To return to normal mode, press again Holiday or set the knob to the desired position. After turning on, the refrigerator will reach operating temperature in 2–4 hours.

5. Setting up additional functions (if the model has them)

Some models Biryusa Medline are equipped with advanced options. Let's check which of them can be useful:

• 🌬️ No Frost (in models Biryusa 220M and higher) - automatic defrosting. Does not require setup, but once every 6–12 months you still need to wash the chamber.
• 🔄 Fast Cool —accelerated cooling (analogous to “Super Freeze” for the refrigerator compartment). Turned on by the button Fast Cool on 6–12 o'clock.
• 🔔 Sound signal —notifies about the open door. In electronic models, you can turn it off in the menu (hold Alarm 5 seconds).
• 🌡️ Display with an external sensor - shows the temperature in the room. Configured in the service menu (not available in all models).

For models with display (for example, Biryusa 130M) a service menu is available. To get into it:

1. Unplug the refrigerator for 1 minute.
2. Turn it on and immediately press the combination Temp + Freezer (hold 5 seconds).
3. In the menu you can reset errors or calibrate sensors (this requires knowledge - not recommended without experience!).

⚠️ Attention: Incorrect actions in the service menu can lead to failure of the control board. If you are not sure, contact your specialist.

Turn off the “Vacation” mode (if the refrigerator is not in use)

Remove all food and defrost the chambers

Wipe the internal surfaces with a solution of vinegar (1:1 with water)

Leave the doors ajar for ventilation

-->

6. Typical problems during setup and their solutions

If after setup the refrigerator does not work correctly, check the following points:

If the refrigerator Biryusa Medline makes unusual sounds (knocking, humming), this is not always a breakdown. First 1-2 days after setting, the compressor may work louder - this is normal. But if the noise does not go away, check:

• 🔧 Compressor mounting (the bolts may have loosened).
• 🧊 Ice on the back wall (need defrosting).
• 🔌 Mains voltage (should be 220V ±10%).

7. Tips for saving energy

Refrigerators Biryusa Medline belong to the energy consumption class A+ or A++, but even they can waste excess electricity if used incorrectly. consumption:

• 🔌 Do not place the refrigerator next to the stove or radiator (the optimal distance is 50 cm).
• 🚪 Open the door no longer than 20 seconds — every extra hour with the door open increases consumption by 5%.
• 🧊 Defrost regularly (even models with No Frost need care once a year).
• 🌡️ Install temperature +4°C in the refrigerator compartment and -18°C in the freezer - this is enough for safe storage.

In Biryusa Medline models with electronic control there is a hidden “Eco Mode” function. To activate it, press sequentially: Temp → Freezer → Temp → Freezer. The 🌿 icon will appear on the display, and energy consumption will decrease by 10–15%.

Also pay attention to sealing rubber bands - if they are damaged, the refrigerator loses up to 30% cold air. It’s easy to check the tightness: close the door, bring a sheet of paper and try to pull it out. If the sheet comes out easily, the rubber band. it's time to change.

8. How to reset the settings to factory settings

If you experimented with the modes and the refrigerator began to work unstably, resetting to factory settings will help. Methods depend on the type. controls:

For mechanical models:

1. Disconnect the refrigerator from the mains for 5 minutes.
2. Set the temperature controls to position 0.
3. Connect the power and set the required parameters again.

For electronic models:

1. Press and hold the button Set (or Temp) 10 secondsuntil the display flashes.
2. Confirm reset button OK.
3. After rebooting (1-2 minutes), adjust the temperature again.

If the reset did not help (for example, errors are still on the display), perhaps the control board environment In this case:

• Try turning off the refrigerator 1 hour.
• Check the voltage in the outlet (should be 220V).
• If the problem persists, contact the service center Biryusa.

FAQ: Frequently asked questions about setting up Biryusa Medline

🔹 How do I know what model of refrigerator I have?

The model number is indicated on the sticker inside the refrigerator compartment (usually on the left wall) or on the back panel. For example, Biryusa 130M-003 or Biryusa 220M-012. series.

🔹 Is it possible to turn off the door open sound signal?

Yes, in electronic models, hold the button Alarm (or Sound) 5 secondsuntil the signal turns off. In mechanical models, the signal is turned off only physically - by disconnecting the contacts (not recommended).

🔹 Why, after setting, the temperature in the chambers does not match set?

Possible reasons:

• The temperature sensor is faulty or dirty.
• Too much warm food has been placed in the chamber (you need to wait 2-3 hours).
• Leakage freon (repair required).
• The refrigerator is in a hot room (the optimal ambient temperature is +16°C…+32°C).

🔹 Is it necessary to defrost a refrigerator with No Frost?

Yes, although ice forms less often in such models, it is recommended to wash the chambers once a year. Use soft sponge and baking soda solution. Do not use abrasives - they will damage the coating.

🔹 How to reconfigure the refrigerator after moving?

After transportation:

1. Let the refrigerator stand 4–6 hours in a vertical position (to stabilize the oil in the compressor).
2. Connect to the network and set the temperature +4°C/-18°C.
3. Do not load products in the first ones 2 hours —let the system reach mode.