The situation when the refrigerator Beko ceases to perform its main function - cooling, may take you by surprise. You open the door, and it’s warm, the food begins to spoil, and panic arises. Malfunction can be caused by either a simple network overload or a serious failure of the compressor. It is important not to lose composure and consistently check all possible options.
In most cases, the problem lies in violation of operating rules or failures in the control system. Modern models are equipped with sophisticated electronics that are sensitive to power surges. However, before calling a technician, it is worth conducting an independent diagnosis to rule out simple causes.
Further actions depend on exactly how the breakdown manifests itself: whether the cold is completely absent or it is there, but weak. Understanding the nuances of how your model works can save you time and money. Below we will analyze in detail the algorithm of actions when detecting heat in the chambers.
Often users are faced with the fact that the refrigerator hums, but does not get cold. This indicates that the motor is running, but refrigerant does not circulate through the system or heat exchange does not occur. In other cases, the appliance may be silent, indicating an electrical problem. Let's analyze these scenarios in detail.
Primary diagnostics and checking the power supply
The first thing to do if you find that the refrigerator Beko does not freeze is to check the presence of electricity. Sometimes the problem is trivial: the plug has come off the socket or the circuit breaker in the panel has tripped. Make sure that the light is on Power indicator on the control panel or inside the camera.
Check the outlet itself by connecting another device to it, such as a hair dryer or lamp. If the socket is working properly, inspect the refrigerator power cord for damage, kinks or traces of melting. Cable defects may lead to unstable operation or complete shutdown of the equipment.
⚠️ Attention: Never try to repair the refrigerator power cord yourself if you do not have appropriate qualifications. A damaged cable creates a risk of short circuit and fire.
If everything is in order with the socket and cable, listen to the operation of the unit. Does it make the usual hum? Silence may indicate a broken thermostat or start relay. A loud humming sound without the compressor starting is also a warning sign. In some cases, rebooting the system helps.
For models with electronic control, try unplugging the refrigerator for 10-15 minutes. This will allow you to reset possible errors in the controller memory. After turning on, the system can restart correctly and cooling will be restored.
Errors in setting the temperature
Often the reason for the lack of cold is the human factor. In a hurry or through carelessness, one of the household members could change the thermostat settings. In models with mechanical controls, this is a knob inside the camera; in digital models, it is a touch panel.
Check what position the control is in. If it is set to minimum or to Offmode, the compressor simply will not turn on. Models Beko typically have a “Vacation” or “Eco” mode, which can limit the operation of the main chamber.
If you have a two-compressor system, make sure that one of the chambers is not turned off. In refrigerators with one compressor and system No Frost imbalance of temperature can lead to the fact that the freezer will be cold and the refrigerator will be warm, or vice versa.
It is also worth checking whether the quick freeze function is activated (Fast Freeze). Although it is designed for the freezer, prolonged use in this mode can overload the system. Reset the settings to factory settings according to the instructions.
Problems with door seals and airtightness
Sealing the chambers is key to maintaining low temperatures. If the rubber seal on the door is worn out, dirty or deformed, warm air constantly flows inside. The compressor is working hard, trying to compensate for heat loss, but cannot cope. Beko worn out, dirty or deformed, warm air constantly flows inside. The compressor is working hard, trying to compensate for heat loss, but it can’t cope.
Carry out a visual inspection of the seal around the entire perimeter. There should be no cracks, tears or sticky residue on it. Dirt and grease can prevent the door from sealing tightly. Clean the rubber with a soft cloth and soapy water.
There is a simple leak test using a sheet of paper. Squeeze the sheet with the refrigerator door and try to pull it out. If the paper is removed easily without resistance, it means that in this place seal does not fit tightly.
- 🧼 Wash the seal thoroughly with warm water and a mild detergent.
- 🔍 Inspect the rubber for microcracks and abrasions.
- 📏 Check the evenness of the door installation and the operation of the hinges.
- 🌡️ Make sure that the products do not interfere with the tight closure.
If the seal has lost its elasticity, you can try to restore it. There is a method of heating the rubber with a hairdryer or treating it with boiling water, but this is a temporary measure. In the long term, you will need replacement parts.
How to properly dry the seal after washing?
After washing, be sure to wipe the seal dry. Moisture in the folds of rubber can lead to the formation of mold, which destroys the structure of the material. Also, wet rubber can freeze to the housing when the compressor is first started.
Malfunctions of the No Frost defrosting system
Refrigerators Beko with the system No Frost automatically get rid of ice. However, if one of the elements of this system fails, the evaporator becomes overgrown with ice, blocking the air circulation channels. As a result, the cold does not enter the chamber.
The main culprits in this situation: defrost heating element, defrost sensor or timer. If the heating element burns out, the ice does not melt. If the sensor is lying, the system does not receive a signal to turn on the heating. Visually, this manifests itself in the form of a snow coat on the back wall inside the case.
Diagnostics often require partial disassembly of the refrigerator. You need to get to the evaporator hidden behind the plastic panel. If a massive layer of ice is found there, and the fan does not spin or is blocked, the problem is in the defrost system.
⚠️ Attention: Do not use sharp objects to chip the ice inside the refrigerator. You can damage the evaporator tubes, which will lead to a freon leak and costly repairs.
Sometimes the problem is solved by completely defrosting the refrigerator in the off state for 24 hours. If after switching on the cold appears, but after a few days it disappears again, then a defrost circuit is required. repair defrost circuits.
☑️ Diagnostics of the No Frost system
Refrigerant leak and problems with the compressor
If the refrigerator hums, but does not cool, and the condenser (grid at the back) remains cold, there is a high probability of a freon leak. Refrigerant - this is the working fluid that transfers heat. Without it, the compressor simply wastes gas.
Leaks can occur in places where pipes are soldered or due to corrosion of the evaporator, especially in models with a foamed circuit. Finding the leak on your own is difficult and requires special equipment. Signs may also include swelling on the walls or oily stains.
The compressor is the heart of the refrigerator. If it is burnt or jammed, there will be no cold. Often, engine failure is indicated by clicking sounds when trying to start or a characteristic burning smell. In some cases, the starting relay fails.
| Symptom | Possible cause | Required actions |
|---|---|---|
| Humming, but not cooling | Freon leak, capillary clogged | Call a technician to find a leak |
| Clicks and does not start | Faulty starter relay | Replacing the relay (you can do it yourself) |
| Hot compressor | Overload, dirty condenser | Cleaning the grill, checking ventilation |
| There is cold, but weak | Compressor wear, loss of power | Measuring pressure in the system, replacing the motor |
Replacing a compressor or refilling with freon are complex technical procedures that require a license and tools. It is not recommended to take them on yourself, as there is a high risk of permanently damaging the unit.
The influence of external factors and operating conditions
Sometimes the reason lies not in the breakdown, but in the conditions in which there is a refrigerator Beko. For example, if the equipment is installed close to a wall or in a niche without ventilation, the condenser does not have time to release heat. This leads to overheating and cooling stops.
The temperature in the room also plays a role. Most models are designed to operate at temperatures from +10 to +32 degrees. If the room is colder (for example, in an unheated country house in winter) or hotter, the thermostat may not work correctly.
Loading the refrigerator with food affects air circulation. If you put a large amount of warm food into the chamber or fill the shelves to capacity, the system will take a long time to stabilize the temperature. During this period, it may seem that the refrigerator is not freezing.
It is also worth considering the location of the equipment relative to the heating devices. Proximity to a radiator or stove creates local overheating, which a standard cooling system may not be able to cope with even with working components.
Is it possible to turn on the Beko refrigerator immediately after transportation?
No, it is not possible. During transportation, oil from the compressor may have entered the circulation circuit. If you turn on the unit immediately, water hammer and breakdown are possible. Let the refrigerator stand upright for at least 4-8 hours (preferably a day) before turning it on for the first time.
Why does ice freeze in the Beko refrigerator, although it is declared No Frost?
This is a sign of a malfunction of the defrosting system (heating element, sensor, timer) or a problem with the door seal. Ice may also appear if you often leave the door open or put hot food in.
What to do if the temperature alarm indicator is on?
The indicator indicates an increase in the temperature inside the chamber. Check that the door is closed tightly and that the refrigerator is not overloaded. If after several hours of operation the indicator does not go out and the cold does not appear, diagnostics are required.
How often do you need to defrost a Beko refrigerator with No Frost?
The No Frost system does not require regular defrosting to remove ice. However, once every 6-12 months it is recommended to turn off the refrigerator for hygienic washing and drying in order to eliminate odors and bacteria.