When planning a delivery or move, one of the key issues is the mass of household appliances. Often, buyers get lost in numbers, not understanding the difference between the weight of the unit itself and the weight with packaging. Refrigerators of the Belarusian plant Atlant are famous for their reliability, largely due to the use of high-quality and heavy materials in the design of compressors and housings.
Knowing the exact mass is necessary not only for loaders, but also for assessing the strength of the shelves on which the device will stand, as well as for calculating the permissible load on the floor in old homes. Average weight The Atlant two-chamber refrigerator varies over a wide range, depending on the height, the number of compressors and the volume of the chambers.
In this article we will look in detail at how many kilograms there are in different series, how the type of refrigerant affects the weight and why this data is critical when choosing a location installations.
What determines the mass of refrigeration equipment
The main factor determining how many kg an Atlant refrigerator weighs is the type and number of compressors. Double-compressor models are traditionally heavier, as they are equipped with two motor-compressors, each of which is a massive metal unit. Modern single-compressor systems may be lighter, but this is not always the rule, since increasing the volume of chambers requires a more powerful and heavier unit.
The second important factor is thermal insulation materials and wall thickness. Manufacturers use dense foam materials to ensure energy efficiency. The higher the energy consumption class and the better the insulation, the more massive the housing walls can be. The final figure is also influenced by the presence of a system No Frost, which adds weight due to evaporators, fans and additional air ducts.
⚠️ Attention: The weight of an empty refrigerator and the weight of a loaded refrigerator may differ by 30-50 kg. When calculating the load on furniture or the floor, always take into account the maximum load, and not just the passport data of the empty device.
Do not forget about the refrigerant. Although modern gases (R600a) weigh little, their quantity in the system and the volume of copper tubes in the condenser contribute to the total weight. Models operating on R134aoften have a heavier circulation system.
Weight of two-chamber Atlant refrigerators
Two-chamber models are the most popular on the market. Their mass directly depends on the height of the body. Standard models up to 160 cm in height usually weigh less than their tall counterparts.
For models of the 4008 and 4508 series, which belong to the classic format, the average weight is about 55-60 kg. This is the “golden mean”, which makes it relatively easy to move equipment with the help of two people. Higher models, such as the 4423 or 4425 series, can reach a weight of 65-70 kg due to the increased volume of metal and plastic.
If we consider narrow models, their weight can be reduced to 50 kg, but this is rather an exception. The main mass falls on the rear wall with the condenser and the compressor compartment. It is important to understand that even small differences in dimensions can lead to a significant difference in weight due to different wall thicknesses.
- 💡 Series 3000: Compact models weighing about 52-55 kg, ideal for small kitchens.
- 💡 Series 4000: Classic weight 60-65 kg, balance of volume and mass.
- 💡 Series 6000: Wide and spacious units, whose weight can exceed 75 kg.
- 💡 No Frost models: Usually heavier analogs with a drip system for 5-8 kg.
Weight of three-chamber models and Side-by-Side
Atlant three-chamber refrigerators, which have a separate area for fresh food or an additional freezer, belong to the class of heavy equipment. Their design is more complex, and the volume of materials used is much larger. The average weight of such models ranges from 80-95 kg.
Side-by-Side models deserve special attention, although they are represented less widely in the Atlant line than the classic options. If you are planning to purchase such a giant, be prepared for the fact that its weight can reach 100-110 kg. Moving such cargo requires professional equipment or the services of loaders.
When installing a three-compartment refrigerator, it is critical to level it. Due to the large mass, even a slight misalignment can lead to incorrect operation of the compressor or vibrations that will be transmitted to the floor.
Why are three-chamber models so heavy?
Three-chamber refrigerators have an increased area of thermally insulated walls and, as a rule, are equipped with a more powerful cooling system to maintain different temperature conditions in three independent zones. This requires more metal, copper and insulating materials.
Difference between Net and Gross weight
When ordering delivery, there is often confusion between the weight of the refrigerator itself (net) and the weight in the package (gross). The difference between these indicators can be from 5 to 10 kg. The packaging includes durable cardboard, foam pads that protect the corners, and a wooden or plastic frame for the bottom.
For an elevator or narrow doorway, it is the gross weight that is important, since you will have to carry the refrigerator along with the packaging so as not to damage the enamel and handles. It is not recommended to remove the packaging before bringing it into the apartment - there is a high risk of scratching the case on the door jambs.
| Model type | Net weight (approximately) | Gross weight (with packaging) | Difference |
|---|---|---|---|
| Double-chamber (160 cm) | 58 kg | 65 kg | ~7 kg |
| Double-chamber (200 cm) | 72 kg | 82 kg | ~10 kg |
| Three-chamber | 85 kg | 96 kg | ~11 kg |
| Small (up to 140 cm) | 45 kg | 51 kg | ~6 kg |
Please note that the data in the table are averaged. The exact characteristics are always indicated in the technical data sheet of the specific model Atlant. The scatter may be caused by the year of manufacture and the configuration.
The influence of the defrosting system on weight
The system No Frost (or Full No Frost) adds complexity to the design. Such Atlant refrigerators contain additional fans, defrosting heating elements and a more complex air duct system. All these elements have their own weight.
Compared to the classic drip system (crying evaporator), the No Frost models are heavier. The difference may not be colossal, but noticeable when going up to a floor without an elevator. In addition, No Frost systems often use a thicker layer of insulation to prevent condensation, which also increases weight.
However, there is a downside: modern models with inverter compressors can be lighter than old Soviet analogues due to the use of new alloys and optimized design, even if they are equipped with No Frost.
Features of transportation and installation
Knowing how much your Atlant refrigerator weighs, you can properly plan logistics. For models weighing up to 60 kg, two people are enough. If the weight exceeds 70 kg, it is recommended to hire professional loaders or use a special trolley with belts.
When moving, it is important to remember the tilt rule. The refrigerator should not be tilted more than 40 degrees to prevent oil from the compressor from entering the refrigerant circuit. After delivery of a heavy unit, it must be allowed to “settle” before turning on.
☑️ Preparation for installation
⚠️ Attention: If the refrigerator was transported at subzero temperatures, the settling time before switching on should be at least 4-6 hours (until it is completely warmed up to room temperature), regardless of its weight.
For installation on a weak floor (for example, on a wooden flooring on joists), it is better to choose models of less weight or distribute the load by placing wide plates made of durable material under the legs.
Comparison with competitors
Refrigerators Atlant are often compared with products from Bosch, Indesit or LG. Belarusian models are traditionally considered more “squat” and heavier due to the simplicity of design and the use of steel in elements, where competitors can use lightweight composites.
For example, a refrigerator of a similar volume from a European brand can weigh 5-10 kg less. This is not always a disadvantage: consumers often associate greater weight with high vibration resistance and durability. A heavy body better dampens the vibrations of a running motor.
However, when choosing an installation location in a kitchen niche or built-in furniture, weight becomes a critical parameter. Built-in models are usually lighter than their free-standing counterparts, since the decorative panels and part of the body are taken over by the furniture set.
Frequently asked questions (FAQ)
Is it possible for one person to lift the Atlant refrigerator?
Models weighing up to 50 kg can be lifted by a physically strong person, but this is risky for back and the device itself. Models weighing 60 kg and above are strictly not recommended to be lifted alone. The best option is to use a cargo cart or the help of a second person.
Does the year of manufacture affect the weight of the refrigerator?
Yes, it does. Modern models can be lighter due to new compressor technologies and the use of lighter but more effective insulators. Older models from the 90s and early 2000s were often heavier due to the excess strength of the metal.
Do you need to remove the doors to reduce weight when lifting?
Removing the doors reduces the weight by about 5-8 kg and, more importantly, reduces the dimensions, which makes it easier to pass through narrow doorways. However, this requires tools and time. If the weight allows, it is better not to remove the doors so as not to disturb the adjustment of the hinges.
Where can I find out the exact weight of my model?
The exact weight (net and gross) is always indicated in the operating instructions (section "Technical Specifications") and on the sticker located inside the refrigerator compartment or on the back wall of the device. The data is also available on the manufacturer's official website.