When planning a purchase or move, owners of large equipment often wonder about its exact weight. Two-meter refrigerator is a massive device that requires a special approach during delivery. An error in calculations can lead to damage to the flooring or injury to loaders.
The weight of the unit directly depends on the internal volume, the number of compressors and the type of refrigerant used. Modern models can differ significantly in weight from equipment produced ten years ago, even with the same dimensions. In this article, we will analyze in detail the factors influencing weight and provide specific figures for popular brands.
Understanding this how much does a 2-meter refrigerator weigh?is necessary not only for ordering loaders, but also for assessing the load on the floor. In old houses with wooden floors, every kilogram counts. In addition, knowing the weight will help you choose the right vehicle for transportation.
What determines the mass of a 2-meter unit
The main factor that determines the final figure on the scales is the volume of the refrigerator and freezer compartments. The more liters the device holds, the thicker the insulation walls and the more massive the compressor equipment. A standard two-chamber refrigerator with a height of about 200 cm usually has a useful volume of 300 to 400 liters.
The housing materials also play a critical role. Budget models are often made using thinner metal and lightweight plastic panels. At the same time, premium models may have doors made of tempered glass or stainless steel, which significantly increases the total weight of the structure.
The number of compressors is another important parameter. Double cooling systems require the installation of additional fans and evaporators. This adds weight, but provides better air circulation and the absence of ice. No Frost and double cooling require the installation of additional fans and evaporators. This adds weight, but provides better air circulation and no ice.
The influence of energy efficiency class on weight
Models with a high energy efficiency class (A++ and higher) often have a thicker layer of thermal insulation in the walls, which makes them heavier than analogues with a low class, even with the same internal volume.
Average weights by brand
Different manufacturers use different assembly standards and components. European brands traditionally gravitate towards the use of heavy metal and high-quality plastic. Asian manufacturers often optimize the design to reduce logistics costs.
For example, appliances Liebherr or Bosch 2 meters high often exceed the 80 kg mark thanks to enhanced sound insulation and metal doors. Chinese and Korean analogues, such as Haier or LG, can weigh 10-15 kg less due to composite materials.
It is worth considering that the weight is indicated in the product passport without packaging. The shipping box, polystyrene foam and wooden pallet add another 10-15% to the weight. This is important when calculating the load capacity of an elevator or flight of stairs.
Weight table of popular models with a height of about 2 meters
For ease of comparison, we have prepared summary data on common models. Please note that the weight may vary slightly depending on the year of manufacture and the specific modification.
| Brand and series | Height, cm | Volume, l | Net weight, kg |
|---|---|---|---|
| Atlant XM-4425 | 205 | 340 | 66 |
| Indesit ITS 4200 | 196 | 346 | 64 |
| Samsung RB-37 | 201 | 367 | 72 |
| LG GA-B509 | 203 | 384 | 79 |
| Bosch KGN39 | 203 | 366 | 87 |
As can be seen from the table, the spread is more 20 kg between the lightest and heaviest model. Models with metal doors and a double cooling system have the highest specific weight.
The influence of the defrosting system on weight
The system No Frost implies the presence of additional technical components. Fans, defrost heating elements and a complex air duct system add mass to the structure. The drip defrosting system is structurally simpler and lighter.
However, the difference in weight is not always obvious to the consumer. Modern insulating materials are becoming lighter, compensating for the weight of equipment. Therefore, a two-meter refrigerator with No Frost can weigh the same as an old unit with manual defrosting.
⚠️ Attention: When transporting refrigerators with the No Frost system, it is important to maintain a vertical position. An inclination of more than 40 degrees can cause oil to leak from the compressor into the cooling circuit, which will require a long period of settling before turning on.
If you are choosing between models for ease of carrying, keep in mind that lightweight models often have less effective sound insulation. A heavy body better dampens the vibrations of a running motor.
How to correctly calculate the load when moving
Before ordering transport, you need to add up the weight of the device itself and the weight of the packaging. For a two-meter refrigerator this is usually 70-90 kg in its pure form. Loaders charge per floor or per weight, so accurate data will save your budget.
If the house has an elevator, check its load capacity. Standard passenger elevators can withstand 400-600 kg, but in older buildings this limit can be reduced to 300 kg. In this case, a two-meter refrigerator will have to be carried manually up the stairs.
When carried manually, one person should have no more than 30-35 kg. Therefore, to lift a two-meter unit, a minimum of two strong people is required, and preferably three, or the use of a special trolley with belts.
☑️ Check before lifting
Features of installation on different types of floors
A two-meter refrigerator creates a point load on an area of about 0.4-0.5 sq.m. For concrete floors in modern houses this is not a problem. However, for wooden floors or floors on joists in Stalinist houses, 70-90 kg is a significant load.
It is recommended to distribute the weight using footrests or a thick sheet of plywood if the floor creaks or sag. Adjusting the legs helps to level the equipment, but does not relieve the load on the building structure.
Heavy models are more stable in this regard, since they are more difficult to move from their place with an accidental push.
⚠️ Attention: Do not install a two-meter refrigerator on soft carpeting or thick carpets. This disrupts the ventilation of the compressor and can lead to overheating, since the weight of the device presses the pile, blocking the access of air from below.
The influence of filling on the total weight
An empty refrigerator weighs less than a full one. When planning the load-bearing capacity of a floor or transport, it is worth considering that food, water and ice can add another 30-50 kg to the weight of the device.
Ice in the freezer is the heaviest component after metal. If you transport the refrigerator without defrosting it completely, the water inside may shift the center of gravity, which is dangerous when tilted. Always transport equipment empty and dry.
Tempered glass shelves also add weight, especially on wide-width models. Glass shelves are stronger than plastic ones, but their dismantling before transportation is required to avoid chipping and reduce the overall weight.
Tips for safe transportation
Knowing the exact weight, it is easier to select equipment. For models heavier than 70 kg, the use of carrying straps is mandatory. They allow you to redistribute the load on your shoulders and free your hands for belaying.
If you transport equipment yourself, make sure that the car body is level. Sloping floors can cause loads to slip. Secure the refrigerator with stops, even if the trip only takes 15 minutes.
After delivery, let the equipment settle. If the refrigerator was transported lying down or at a strong angle, the oil in the compressor could move. The settling time depends on the temperature outside and ranges from 2 to 24 hours.
Is it possible to transport a two-meter refrigerator lying down?
Technically it is possible, but it is extremely undesirable. When transporting lying down, there is a high risk of damaging the condenser tubes or causing oil to leak into the circuit. If there is no other way out, place the refrigerator strictly on the back wall (if permitted by the instructions) or on the side opposite to the outlet of the compressor tubes.
Why is the weight in the store and on the Internet different?
The difference arises due to rounding of data by the manufacturer, packaging weight or changes in design (new version of the model). Also, the weight may vary depending on the country of assembly and configuration (presence of an ice maker, type of handles).
Does the color of the body affect the weight of the refrigerator?
Almost no effect. A layer of paint or metal-look coating is grams. However, models with a facade made of stainless steel or glass will be much heavier than their white-painted counterparts due to the mass of the finishing material itself.
Do you need to remove the doors when moving?
For two-meter models with a width of more than 60 cm, removing the doors is often necessary to get through narrow doorways (standard 80 cm). Removing the doors also reduces the weight of the structure by 10-15 kg and reduces the risk of damaging hinges or furniture when maneuvering.